Skip to main content

Person

Robert R Sickler

thumbnail
In March 2015, the U.S. Geological Survey acquired seismic reflection and refraction data along an approximately 2.8-km-long profile across northwest-trending San Andreas Fault splays located at the Dos Palmas Preserve east of Salton Sea. To acquire the reflection and refraction data, we collocated shots and geophones, spaced every 3 m along the profile. We used 933 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 925 P-wave shots. We generated P-wave data using one of two active sources: 400-grain Betsy-SeisgunTM shots at approximately every 90 m and a 3.5-kg sledgehammer and steel plate combination at every 3 m between the seisgun shots. All data...
thumbnail
In October 2016, we acquired an approximately 15-km-long seismic profile along a linear transect across the East Bay region of the San Francisco Bay area. Our goal was to image previously unknown strands of the Hayward Fault zone and to better delineate the structure and geometry of the main trace of the Hayward Fault. Our profile started near the southern border of San Leandro, California at the San Francisco Bay shoreline, trended ENE through the northern edge of Castro Valley, California, and ended approximately 5 km WSW of San Ramon, California. The data were analyzed using refraction tomography modeling, reflection processing, and guided-wave analysis. The analyzed data are presented in separate reports by...
thumbnail
In April 2017, the U.S. Geological Survey acquired high resolution P- and S-wave seismic data across the suspected trace of the West Napa Fault zone in St. Helena, California. We acquired seismic reflection, refraction, and guided-wave data along a 215-m-long profile across the expected trend of the West Napa Fault zone. To acquire the reflection and refraction data, we co-located shots and geophones, spaced every 2 m along the profile. We used 109 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 108 P-wave shots, and 109 SercelTM L28-LBH S-wave (4.5-Hz horizontal-component) geophones with a sensitivity of 31.3 volts/meter/second to record 108 S-wave...
thumbnail
We acquired multiple types of controlled-source seismic data across the Hollywood Fault in Hollywood, Calif., and the Santa Monica Fault in Beverly Hills, Calif., in May and June of 2018. We acquired two separate profiles across the Hollywood Fault, and from those data, we can evaluate multiple seismic datasets, including guided-wave data, tomographic Vp data, and tomographic Vs data. From the datasets, we can calculate multiple seismic models, including Vp/Vs and Poisson's ratio models derived from tomographic Vp and Vs data, Rayleigh-wave-based Vs models, Love-wave-based Vs models, Vp/Vs and Poisson's ratio models (derived from combinations of tomographic-based Vp and surface-wave-based Vs models), P-wave reflection...
thumbnail
In August 2017, the U.S. Geological Survey acquired high-resolution P- and S-wave seismic data near six Southern California Seismic Network (SCSN) recording stations in southern California: CI.OLI Olinda; CI.SRN Serrano; CI.MUR Murrieta; CI.LCG La Cienega; CI.RUS Rush; and CI.STC Santa Clara (Figure 1). These strong-motion recording stations are located inside Southern California Edison electrical substations, critical infrastructures that provide essential services to millions of customers. The primary goals of the seismic survey were to understand the potential for amplified ground shaking and to evaluate lateral variability in shear-wave velocity at these sites. We deployed up to 88 geophones at 2-m or 4-m...
View more...
ScienceBase brings together the best information it can find about USGS researchers and offices to show connections to publications, projects, and data. We are still working to improve this process and information is by no means complete. If you don't see everything you know is associated with you, a colleague, or your office, please be patient while we work to connect the dots. Feel free to contact sciencebase@usgs.gov.