|
|
This data set includes results for hormone and pharmaceutical compounds analyzed in environmental and quality-control samples collected by the USGS National Water-Quality Assessment Project during 2013 through 2015 for a study of groundwater resources used for drinking-water supply across the United States. Hormone and pharmaceutical results are provided for environmental samples collected at 1,120 wells or springs; selected ancillary data, such as principal aquifer, well depth, and land-use information also are provided for the sampled sites. The types of quality-control samples included in this data set are blanks, matrix spikes, and replicates collected at field sites or field offices. Included in this data...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Cycle 3,
Drinking water,
Environmental Health,
Groundwater,
Hormones, All tags...
Human health,
NAWQA,
National Water Quality Program,
Pharmaceuticals,
USGS Science Data Catalog (SDC),
United States,
Water Quality,
Water quality, Fewer tags
|
Groundwater quality data were collected in 5,000 wells between 1988-2001 by the National Water-Quality Assessment Project. About 1,500 of these wells were sampled again between 2002-2012 to evaluate decadal changes in groundwater quality. Monitoring wells, domestic supply wells, and some public supply wells were included in this study. All water was collected prior to treatment. Groundwater samples used to evaluate decadal change were collected from networks of wells with similar characteristics. Some networks, consisting of domestic or public supply wells, were used to assess changes in the quality of groundwater used for drinking water supply. Other networks, consisting of monitoring wells, assessed changes in...
|
Groundwater-quality data were collected from 502 wells as part of the National Water-Quality Assessment Project of the U.S. Geological Survey National Water-Quality Project and are included in this data release. Most of the wells (500) were sampled from January through December 2015 and 2 of them were sampled in 2013. The data were collected from five types of well networks: principal aquifer study networks, which are used to assess the quality of groundwater used for public water supply; land-use study networks, which are used to assess land-use effects on shallow groundwater quality; major aquifer study networks, which are used to assess the quality of groundwater used for domestic supply; enhanced trends networks,...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Cycle 3,
NAWQA,
National Water Quality Program,
USGS Science Data Catalog (SDC),
Water Quality, All tags...
cycle 3,
groundwater,
nawqa,
water quailty, Fewer tags
|
In this dataset we present two maps that estimate the location and population served by domestic wells in the contiguous United States. The first methodology, called the “Block Group Method” or BGM, builds upon the original block-group data from the 1990 census (the last time the U.S. Census queried the population regarding their source of water) by incorporating higher resolution census block data. The second methodology, called the “Road-Enhanced Method” or REM, refines the locations by using a buffer expansion and shrinkage technique along roadways to define areas where domestic wells exist. The fundamental assumption with this method is that houses (and therefore domestic wells) are located near a named road....
|
Galvanic corrosion of lead in water distribution systems can occur when lead pipe or lead solder is in contact with a dissimilar metal such as copper. If the source water entering those systems has a relatively elevated chloride-to-sulfate mass ratio (CSMR), the potential for galvanic corrosion to occur is elevated (Gregory 1985; Edwards and Triantafyllidou, 2007), especially in water with low values of alkalinity (Nguyen and others, 2011). Values of CSMR were computed for untreated groundwater samples from 26,631 locations in the United States. Three levels, identified by Nguyen and others (2011), were used to classify CSMR values relative to their potential for promoting galvanic corrosion of lead. The three-level...
|
View more...
|
