|
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The elevation contour data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The contours were created from a surface raster (also referred to as digital elevation model) of the...
Tags: ASCII,
Bathymetry,
Bonners Ferry,
Geology,
Hypack, All tags...
Hysweep,
ID,
Idaho,
Kootenai River,
Multibeam,
NSDI,
U.S. Geological Survey,
USA,
USGS,
USGS Science Data Catalog (SDC),
Water Depth,
XYZ,
bathymetry,
capacity,
elevation,
inland waters,
inland waters,
inlandWaters,
islands,
lakes,
lidar,
swath bathymetry,
topography, Fewer tags
|
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
Tags: ASCII,
Bathymetry,
Bonners Ferry,
Geology,
Hypack, All tags...
Hysweep,
ID,
Idaho,
Kootenai River,
Multibeam,
NSDI,
U.S. Geological Survey,
USA,
USGS,
USGS Science Data Catalog (SDC),
Water Depth,
XYZ,
bathymetry,
capacity,
elevation,
inland waters,
inland waters,
inlandWaters,
islands,
lakes,
lidar,
swath bathymetry,
topography, Fewer tags
|
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The substrate enhancement pilot project (SEPP) extent GIS layer represents an area where an artificial substrate will be placed. The artificial substrate, consisting of a mixed size class of gravel, is aimed at providing a more suitable substrate for sturgeon eggs and early-life rearing habitat. The location of the SEPP extent was created by analyzing the egg-mat network, bathymetric features, surficial sediment facies, and streamflow...
Tags: Bathymetry,
Bonners Ferry,
Geology,
ID,
Idaho, All tags...
Kootenai River,
Multibeam,
NSDI,
U.S. Geological Survey,
U.S. National Grid,
USA,
USGS,
USGS Science Data Catalog (SDC),
Water Depth,
bathymetry,
capacity,
contour,
elevation,
geographic names,
hydrography,
inland waters,
inland waters,
inlandWaters,
islands,
lakes,
lidar,
orthoimage,
topographic, Fewer tags
|
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
Tags: ASCII,
Bathymetry,
Bonners Ferry,
Geology,
Hypack, All tags...
Hysweep,
ID,
Idaho,
Kootenai River,
Multibeam,
NSDI,
U.S. Geological Survey,
USA,
USGS,
USGS Science Data Catalog (SDC),
Water Depth,
XYZ,
bathymetry,
capacity,
elevation,
inland waters,
inland waters,
inlandWaters,
islands,
lakes,
lidar,
swath bathymetry,
topography, Fewer tags
|
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
Tags: ASCII,
Bathymetry,
Bonners Ferry,
Geology,
Hypack, All tags...
Hysweep,
ID,
Idaho,
Kootenai River,
Multibeam,
NSDI,
U.S. Geological Survey,
USA,
USGS,
USGS Science Data Catalog (SDC),
Water Depth,
XYZ,
bathymetry,
capacity,
elevation,
inland waters,
inland waters,
inlandWaters,
islands,
lakes,
lidar,
swath bathymetry,
topography, Fewer tags
|
View more...
|