Skip to main content

U.S. Geological Survey, Ohio-Kentucky-Indiana Water Science Center

thumbnail
This dataset provides results of a targeted bacterial community metagenomic analysis of surface water, groundwater, and sand samples at Jeorse Park on Lake Michigan in East Chicago, Indiana. Seventy-two samples were collected from 6 sites in 2017. Samples were analyzed for the 16S ribosomal RNA (16S rRNA) gene (the S in 16S refers to the rate of sedimentation, in Svedberg units, of the RNA molecule in a centrifugal field), and one sample was excluded because it produced too few reads. The 16S rRNA gene is the most conserved of three rRNA genes (16S, 23S, and 5S) and is considered the most reliable for identification and taxonomic classification of bacterial species (Bouchet and others, 2008). Taxonomic analysis...
thumbnail
Bathymetry of Morse and Geist Reservoirs in central Indiana, 2016
These data are high-resolution bathymetry (lake bottom elevation) in a gridded XYZ format, generated from hydrographic surveys of Morse and Geist Reservoirs in April and May of 2016. Hydrographic data were collected using a multibeam echo-sounder (MBES) with integrated inertial navigation solution (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the lake along survey lines distributed throughout the area. Data collection software integrated and stored the depth data from the multibeam sonar and the horizontal and vertical position and attitude data of the vessel from the INS in real time. In the shallow areas, additional data were collected with an acoustic Doppler current profiler...
thumbnail
These data are high-resolution bathymetry (lake bottom elevation) in a gridded XYZ format, generated from hydrographic surveys of Morse Reservoir in May 2016. Hydrographic data were collected using a multibeam echo-sounder (MBES) with integrated inertial navigation solution (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the lake along survey lines distributed throughout the area. Data collection software integrated and stored the depth data from the multibeam sonar and the horizontal and vertical position and attitude data of the vessel from the INS in real time. In the shallow areas, additional data were collected with an acoustic Doppler current profiler (ADCP) and a real-time...
The development and the generation of the datasets that are published through this data release were based on the results and findings of the report Ostheimer, C.J., 2021, Geospatial data sets and hydraulic models for selected streams near Rittman in Wayne and Medina Counties, Ohio.: U.S. Geological Survey, https://doi.org/10.3133/sir20215040. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata, and the model archive dataset contains all relevant files to document and re-run the surface-water (SW) hydraulic model that are discussed in the report.
thumbnail
These data are bathymetry (river bottom elevation) in XYZ format (Easting, Northing, Elevation), generated from the September 17–18, 2020, survey of the Kentucky Dam tailwater from just downstream from Kentucky Dam to approximately 1,500 feet upstream from the I-24 bridge (about 1 mile total length). Bathymetric data were collected using an acoustic Doppler current profiler (ADCP) with an integrated global navigation satellite system (GNSS) smart antenna. The ADCP and GNSS antenna were mounted on a marine survey vessel, and data were collected as the survey vessel traversed the tailwater along planned survey lines. There was typically one reciprocal pair (two passes) of data collected per line. There was a total...
View more...
ScienceBase brings together the best information it can find about USGS researchers and offices to show connections to publications, projects, and data. We are still working to improve this process and information is by no means complete. If you don't see everything you know is associated with you, a colleague, or your office, please be patient while we work to connect the dots. Feel free to contact sciencebase@usgs.gov.