Skip to main content

Conceptual marsh units of Blackwater salt marsh complex, Chesapeake Bay, Maryland

Dates

Publication Date

Citation

Ackerman, K.V., Defne, Z., and Ganju, N.K., 2021, Coastal wetlands of the Blackwater region, Chesapeake Bay, Maryland: U.S. Geological Survey data release, https://doi.org/10.5066/P9M7H6XG.

Summary

Note: The 2022 data release "Geospatial Characterization of Salt Marshes in Chesapeake Bay" incorporates the Blackwater region salt marsh dataset. (https://doi.org/10.5066/P997EJYB) This data release contains coastal wetland synthesis products for the geographic region of Blackwater, Chesapeake Bay, Maryland. Metrics for resiliency, including unvegetated to vegetated ratio (UVVR), marsh elevation, and others, are calculated for smaller units delineated from a digital elevation model, providing the spatial variability of physical factors that influence wetland health. The U.S. Geological Survey has been expanding national assessment of coastal change hazards and forecast products to coastal wetlands with the intent of providing Federal, [...]

Contacts

Attached Files

Click on title to download individual files attached to this item.

CMU_BW_Browse.png
“Conceptual marsh units overlaying Esri basemap”
thumbnail 1.4 MB image/png
Shapefile: CMU_BW.zip
CMU_BW.CPG 5 Bytes
CMU_BW.dbf 5.08 MB
CMU_BW.prj 425 Bytes
CMU_BW.sbn 174.12 KB
CMU_BW.sbx 12.18 KB
CMU_BW.shp 849.76 MB
CMU_BW.shx 130.97 KB
CMU_BW.sld 6.42 KB

Purpose

These polygons were created to be used in evaluating the spatial variation of the response and resiliency of the salt marsh complex based on consistently defined marsh units while facilitating a better understanding of the relative importance of the processes involved. The salt marsh complex of the Blackwater region was delineated to smaller, conceptual marsh units by the geoprocessing of surface elevation data. Flow accumulation based on the relative elevation of each location is used to determine the ridge lines that separate each marsh unit while the surface slope is used to automatically assign each unit a drainage point, where water is expected to drain through.

Additional Information

Shapefile Extension

boundingBox
minY38.21753004799907
minX-76.3333138828322
maxY38.50527336120423
maxX-75.68120287439426
files
nameCMU_BW.CPG
contentTypetext/plain
pathOnDisk__disk__2d/5d/5c/2d5d5cbb0bdb91aebdae86ff08570bdbc3d65101
size5
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.dbf
contentTypetext/plain
pathOnDisk__disk__64/67/4b/64674b566ec9f425124ed520b4c860c0fba216bc
size5327362
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.prj
contentTypetext/plain
pathOnDisk__disk__36/59/4c/36594ceac309d338a7f0357fbaa9a5c0e3c464e7
size425
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.sbn
contentTypex-gis/x-shapefile
pathOnDisk__disk__ae/10/e2/ae10e2b022721c44a8faa3dedac365ebac3c7f83
size178300
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.sbx
contentTypex-gis/x-shapefile
pathOnDisk__disk__69/73/84/6973840349210519a0c97584e16ab5f28e55fc37
size12468
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.shp
contentTypex-gis/x-shapefile
pathOnDisk__disk__d0/83/2a/d0832ac7ee727a591656df25d0a7c50dc7eccac7
size891039536
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.shx
contentTypex-gis/x-shapefile
pathOnDisk__disk__28/f3/2c/28f32cc2f2fb644eaeeec7c3eb3717a39a3765bd
size134116
dateUploadedFri Apr 30 08:14:33 MDT 2021
nameCMU_BW.sld
contentTypeapplication/sld+xml
pathOnDisk__disk__9f/41/24/9f41246cc0df2c3a862a5e0f63dba11cba94f00c
size6578
dateUploadedMon May 03 15:03:05 MDT 2021
checksum
value40814736d411e513c8be082868078b5a
typeMD5
geometryTypeMultiPolygon
nameCMU_BW

Item Actions

View Item as ...

Save Item as ...

View Item...