Skip to main content
Advanced Search

Filters: Tags: {"scheme":"Geographic Names Information System"} (X) > Contacts: {oldPartyId:2309} (X)

21 results (24ms)   

View Results as: JSON ATOM CSV
thumbnail
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data; Tags: 3D Elevation Program, 3DEP, American Society of Photogrammetry and Remote Sensing, Base Maps, Bathymetric, All tags...
thumbnail
U.S. Geological Survey (USGS) scientists completed a multidisciplinary data collection effort during the week of October 21-25, 2019, using new technologies to map and validate bathymetry over a large stretch of the non-tidal Potomac River. The work was initiated as an effort to validate commercially-acquired topobathymetric light detection and ranging (lidar) data funded through a partnership between the USGS and the Interstate Commission on the Potomac River Basin (ICPRB). The goal was to compare airborne lidar data to bathymetric data collected through more traditional means (boat-based sonar, wading Real Time Kinematic Global Navigational Satellite System (RTK-GNSS) surveys) and through unmanned aerial systems...
U.S. Geological Survey (USGS) scientists conducted field data collection efforts during the week of September 25 – 29, 2017, using a combination of conventional surveying technologies, for a large stretch of the Kootenai River near Bonners Ferry, Idaho. The work was initiated as an effort to validate commercially acquired topobathymetric light detection and ranging (lidar) data. The goal was to compare the airborne lidar data to topographic and bathymetric data collected through more traditional means (e.g. waded Real-Time Kinematic Global Navigation Satellite System (RTK-GNSS) surveys). The validated topobathymetric lidar data will be used for hydrologic modeling, assessment and restoration of aquatic habitat,...
thumbnail
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Puget Sound. Puget Sound is located along the northwestern coast of Washington and is part of the Salish Sea. Puget Sound is the third largest estuary in the United States. High-resolution coastal elevation data is required to identify flood, storm, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Puget...
Tags: 3D Elevation Program, 3DEP, Acoustic Sonar, BC, Bathymetric, All tags...
thumbnail
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Central California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Central California. The Central California TBDEM integrates 70 different topographic and bathymetric data sources...
thumbnail
To support the modeling of the Colorado River water storage area capacity tables by the U.S. Geological Survey (USGS) Utah Water Science Center in the Glen Canyon National Recreation Area in Utah and Arizona, the USGS Earth Resources Observation and Science (EROS) Center has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Lake Powell, the second largest man-made reservoir in the United States. Located in south-central Utah and north-central Arizona, Lake Powell is a reservoir on the Colorado River created by the flooding of a natural canyon by the construction of Glen Canyon Dam. The new Lake Powell TBDEM consists of the best available multi-source topographic and bathymetric elevation...
Tags: 3D Elevation Program, 3DEP, Acoustic Sonar, Arizona, Bathymetric, All tags...
thumbnail
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Northern California. The Northern California TBDEM integrates 26 different topographic and bathymetric data sources...
Tags: 3D Elevation Program, 3DEP, Acoustic Sonar, Bathymetric, Bathymetry, All tags...
thumbnail
In recent years, rising sea levels have threatened critical infrastructure and cultural assets at Puʻuhonua o Hōnaunau National Historical Park thus motivating the park to make adaptive decisions in managing these key resources. To support the development of decision support tools for sea level rise preparedness, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Puʻuhonua o Hōnaunau National Historical Park. This dataset was developed in collaboration with the University of Hawaii- Mānoa Sea Level Center, Department of Interior Pacific Island Climate Adaptation Science Center, and...
thumbnail
U.S. Geological Survey (USGS) scientists conducted field data collection efforts during the time periods of April 25 - 26, 2017, October 24 - 28, 2017, and July 25 - 26, 2018, using a combination of surveying technologies to map and validate topography, structures, and other features at five sites in central South Dakota. The five sites included the Chamberlain Explorers Athletic Complex and the Chamberlain High School in Chamberlain, SD, Hanson Lake State Public Shooting Area near Corsica, SD, the State Capital Grounds in Pierre, SD, and Platte Creek State Recreation Area near Platte, SD. The work was initiated as an effort to evaluate airborne Geiger-Mode and Single Photon light detection and ranging (lidar) data...
thumbnail
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal Georgia. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Coastal Georgia including neighboring bays, estuaries, waterways, inlets, and...
Tags: 3D Elevation Program, 3DEP, Bathymetric, Bathymetry, CoNED, All tags...
The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) has started to initiate the development of pilot 3D National Topography Models to generate 3-dimensional surface elevation models that integrate river topographic bare-earth elevation surfaces with channel bed bathymetry. Detailed knowledge of integrated river system topography, bathymetry, and topobathymetry, is essential for habitat restoration, hydrologic modeling, and other key science applications such as flood mapping and identification of fluvial geomorphic features. An integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Kootenai River near Bonners Ferry, Idaho, has been developed for this first pilot study. The Kootenai...
thumbnail
To support U.S. Army Corps of Engineers (USACE) storm surge modeling for the Louisiana Coastal Protection and Restoration Authority (CPRA), Lowermost Mississippi River Management Program (LMRMP), the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern Gulf of Mexico (NGOM)-2. High-resolution coastal topobathymetric data are required to model flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic...
Tags: 3D Elevation Program, 3DEP, AL, Acoustic Sonar, Alabama, All tags...
thumbnail
U.S. Geological Survey (USGS) scientists conducted field work efforts during February 15-23, 2017 and April 10-25, 2019 in the mangrove forests of Pohnpei, Federated States of Micronesia (FSM) with logistical assistance from the Micronesia Conservation Trust (MCT) and field assistance from the Conservation Society of Pohnpei and the Pohnpei Department of Forestry. The field team combined the surveying technologies and techniques of Real-Time Kinematic (RTK) Global Navigation Satellite System (GNSS) surveying, total station surveying, and differential leveling to measure elevations on critical features in the mangrove forests, including the elevations of water level recorders, sediment coring locations, and Surface...
thumbnail
The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) has initiated the development of a second pilot 3D National Topography Model (3DNTM) to generate 3-dimensional surface elevation models that integrate topographic bare-earth elevation surfaces with river channel bed and coastal bathymetry and topobathymetry. Detailed knowledge of integrated river system topography, bathymetry, and topobathymetry is essential for fisheries habitat restoration, hydrologic modeling, and other key science applications such as flood mapping and identification of fluvial geomorphic features. An integrated 1-meter topobathymetric digital elevation model (TBDEM) for Hardin, Orange, and Jefferson counties in Southeast Texas has...
thumbnail
Note: this data release has been deprecated. Please see new data release here: https://doi.org/10.5066/P9XM3NKD Bathymetric LiDAR technology was used to collect riverbed elevation data along the Potomac River. In support of this effort, a bathymetric survey with a boat-mounted acoustic Doppler current profiler (ADCP) was conducted in the study area during October 4-7, 2021. The study area consisted of four verification reaches on the Potomac River including: 1) Williamsport accessed through the Williamsport Park boat ramp below Conococheague Creek and RTE 11 (Williamsport), 2) Big Slackwater above C&O Canal Dam #4 accessed through the Big Slackwater Boat Ramp (Dam4), 3) Four Locks above C&O Canal Dam #5 accessed...
thumbnail
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal North Carolina, and South Carolina. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the Coastal Carolinas including neighboring bays, estuaries,...
Tags: 3D Elevation Program, 3DEP, Bathymetric, Bathymetry, CoNED, All tags...
thumbnail
U.S. Geological Survey (USGS) scientists conducted field data collection efforts during the weeks of September 9-13 and November 18-22, 2019, using a combination of technologies to map and validate topography, vegetation, and features in two areas of interest (AOI's) in north central Colorado. The western AOI included land managed by the Bureau of Land Management and the U.S. Forest Service. The eastern AOI included agricultural and urban areas. The work was initiated as an effort to test and evaluate the Leica Geosystems CountryMapper sensor. The CountryMapper is a hybrid sensor that collects imagery and light detection and ranging (lidar) data simultaneously. The CountryMapper has the potential to collect data...
Tags: 3D Elevation Program, 3DEP, AIM, Arapahoe National Forest, Assessment, Inventory, and Monitoring Plot, All tags...
thumbnail
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Southern California Coast and Channel Islands. The Channel Islands are a chain of eight islands where years of isolation has created unique fauna, flora, and archeological resources. The archipelago extends for 160 miles (257 km) between San Miguel Island in the north and San Clemente Island in the south. Five of the islands are part of Channel Islands National Park (Anacapa, Santa Cruz, Santa Rosa, San Miguel, and Santa Barbara), and the waters surrounding these islands make up the Channel Islands National...
Tags: 3D Elevation Program, 3DEP, Acoustic Sonar, Anacapa Island, Bathymetric, All tags...
thumbnail
Bathymetric LiDAR technology was used to collect riverbed elevation data along the Potomac River. In support of this effort, a bathymetric survey with a boat-mounted acoustic Doppler current profiler (ADCP) was conducted in the study area during October 4-7, 2021. The study area consisted of four verification reaches on the Potomac River including: 1) Williamsport accessed through the Williamsport Park boat ramp below Conococheague Creek and RTE 11 (Williamsport), 2) Big Slackwater above C&O Canal Dam #4 accessed through the Big Slackwater Boat Ramp (Dam4), 3) Four Locks above C&O Canal Dam #5 accessed through the Four Locks Boat Ramp (Dam5), and 4) Little Tonoloway Recreation Area accessed through the Hancock Boat...
thumbnail
Airborne light detection and ranging (lidar) can provide high-quality topographic information over large areas. Lidar is an active remote sensing technology that employs laser ranging in near-infrared and green spectral wavelengths to provide three-dimensional (3D) point information for objects, including Earth’s surface, vegetation, and infrastructure. The U.S. Geological Survey (USGS) National Geospatial Program (NGP) 3D Elevation Program (3DEP) seeks to systematically acquire airborne topographic lidar for the conterminous U.S. (conus), Hawaii, and the U.S. territories. A series of field accuracy assessment surveys, using conventional surveying methods (i.e. total station and Global Navigation Satellite System...


map background search result map search result map One Meter Topobathymetric Digital Elevation Model for Majuro Atoll, Republic of the Marshall Islands, 1944 to 2016 Topobathymetric Model for the Central Coast of California, 1929 to 2017 Topobathymetric Model for the Southern Coast of California and the Channel Islands, 1930 to 2014 One Meter Topobathymetric Digital Elevation Model for Lake Powell, Arizona-Utah, 1947-2018 Topobathymetric Model of Puget Sound, Washington, 1887 to 2017 Northeastern Illinois (NEIL) Six County Airborne Lidar Validation Survey Data Potomac River Topobathymetric Lidar Validation Survey Data CountryMapper Sensor Validation Survey Data Topobathymetric Model of Northern California, 1986 to 2019 Pilot Topobathymetric Terrain Model of the Kootenai River near Bonners Ferry, Idaho, 2009 - 2019 Pohnpei, Federated States of Micronesia Mangrove Elevation Survey Data Kootenai River Topobathymetric Lidar Validation Survey Data Central South Dakota Airborne Lidar Validation - Field Survey Data Topobathymetric Model of the Coastal Carolinas, 1851 to 2020 (ver 2.0, January 2023) Topobathymetric Model of the Northern Gulf of Mexico, 1885 to 2021 Potomac River ADCP Bathymetric Survey, October 4-7, 2021 Topobathymetric Model of Coastal Georgia, 1851 to 2020 Topobathymetric Model of Puʻuhonua o Hōnaunau National Historical Park, 2011 to 2019 Potomac River ADCP Bathymetric Survey, October 4-7, 2021 Southeast Texas Pilot National Topography Model (NTM), 1933 to 2021 Topobathymetric Model of Puʻuhonua o Hōnaunau National Historical Park, 2011 to 2019 Northeastern Illinois (NEIL) Six County Airborne Lidar Validation Survey Data Kootenai River Topobathymetric Lidar Validation Survey Data Pohnpei, Federated States of Micronesia Mangrove Elevation Survey Data Pilot Topobathymetric Terrain Model of the Kootenai River near Bonners Ferry, Idaho, 2009 - 2019 Potomac River ADCP Bathymetric Survey, October 4-7, 2021 Potomac River ADCP Bathymetric Survey, October 4-7, 2021 Potomac River Topobathymetric Lidar Validation Survey Data One Meter Topobathymetric Digital Elevation Model for Majuro Atoll, Republic of the Marshall Islands, 1944 to 2016 One Meter Topobathymetric Digital Elevation Model for Lake Powell, Arizona-Utah, 1947-2018 Southeast Texas Pilot National Topography Model (NTM), 1933 to 2021 Central South Dakota Airborne Lidar Validation - Field Survey Data Topobathymetric Model of Puget Sound, Washington, 1887 to 2017 Topobathymetric Model of Coastal Georgia, 1851 to 2020 Topobathymetric Model for the Southern Coast of California and the Channel Islands, 1930 to 2014 Topobathymetric Model for the Central Coast of California, 1929 to 2017 Topobathymetric Model of Northern California, 1986 to 2019 Topobathymetric Model of the Northern Gulf of Mexico, 1885 to 2021 Topobathymetric Model of the Coastal Carolinas, 1851 to 2020 (ver 2.0, January 2023)