Skip to main content
Advanced Search

Filters: Tags: {"type":"Place"} (X) > Contacts: Colin Nicol (X)

8 results (36ms)   

View Results as: JSON ATOM CSV
thumbnail
High-resolution topographic surveys were conducted at two pools on the Carmel River between 2014 and 2019 using a survey-grade total station. The Dam Reach pool (DMPOOL) is located within the Dam Reach, approximately 450 meters downstream of the former site of the San Clemente Dam. The Sleepy Hollow pool (SHPOOL) is located within the Sleepy Hollow reach, approximately 2.25 kilometers downstream of the former site of the San Clemente Dam. Both pools were surveyed in 2014, 2015, 2016, 2017, and 2019 using a total station, in conjunction with the channel cross-section surveys also conducted as part of this study (see accompanying file within this data release for topographic survey transect data). For the 2015 survey,...
thumbnail
This data release supersedes version 1, published in 2017 under https://doi.org/10.5066/F74M93HF. Please see Version_History_P9HG8UDS.txt below for more information. This dataset contains the easting, northing, and elevation values of the river-right and river-left transect endpoint reference benchmarks (RBM and LBM) from survey transects at 10 survey reaches along the Carmel River, central California. Topographic surveys were completed on these transects during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021). See accompanying file within this data release for elevation measurements. All data were collected in NAD83 UTM10N horizontal coordinates and NAVD88 Geoid 12B vertical coordinates,...
thumbnail
This data release supersedes version 1, published in 2017 under https://doi.org/10.5066/F74M93HF. Please see Version_History_P9HG8UDS.txt below for more information. Pebble-count data were collected during summer surveys (2013, 2015, 2016, 2017, 2018, 2019, 2020, and 2021) at ten sites along the Carmel River, California. Grain-size measurements were made at four to six transects per site using a 0.5 by 0.5 m sampling frame, with approximately 100 sediment-particle counts per transect. Each transect was defined by coordinates on the left and right sides of the river, and sediment grain sizes were measured at five equally spaced locations within the bankfull channel on the transect defined by those endpoint coordinates...
thumbnail
This data release supersedes version 1, published in 2017 under https://doi.org/10.5066/F74M93HF. Please see Version_History_P9HG8UDS.txt below for more information. Topographic surveys were completed during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021) at 10 sites along the Carmel River, CA: Berwick (BW), Control Reach (CR), Crossroads (CRO), DeDampierre Lower (DDL), DeDampierre Upper (DDU), Dam Reach (DM), Reservoir Reach (RS), San Carlos (SC), Sleepy Hollow (SH), and Schulte Road (SR)). Topographic measurements were made at multiple locations along four to six cross-section transects per site using a total station (at sites CR, RS, DM and SH) and with an auto level and survey rod...
thumbnail
Field measurements of riverbed grain size were collected from the Merced and Tuolumne Rivers in California to support research on anadromous salmonids. The grain size estimates included in this dataset were obtained from plan-view digital images of grains on exposed gravel and cobble bars (n = 109 for the Merced, n = 26 for the Tuolumne). The images were used to estimate grain-size distributions using the algorithm of Buscombe (2013). In this dataset we report the median grain size (D50), the 16th percentile (D16) and 84th percentile (D84). The spatial location of each measurement was obtained via a Trimble R10 RTK GPS receiver. The map projection and datum for these data from the Merced River are UTM Zone 11 N...
thumbnail
This data release includes various data sets used to quantify the capacity of two rivers, the Merced and Tuolumne, in the Sierra Nevada of California for reintroduction of two species of anadromous salmonids, Steelhead and spring-run Chinook Salmon. The child pages linked below provide access to the following data sets: Topo-bathymetric digital elevation models of the river channels and adjacent floodplains produced by fusing lidar topography of dry areas with information on water depth derived from hyperspectral images. Sediment grain size measurements at distinct points along each river derived from close-range photographs of bar surfaces. Together, these data sets were used to model the suitability of the...
thumbnail
This child data release includes fused topo-bathymetric digital elevation models of the Merced and Tuolumne Rivers in California used to support research on anadromous salmonids. The purpose of this study was to calculate the capacity for reintroduction of salmonids above impassable barriers. Airborne, near-infrared (NIR) LiDAR and hyperspectral imagery were acquired simultaneously in September 2014 from a Cessna Caravan, with the LiDAR data used to map topography of dry land and the imagery used to map water depth in the wetted channel. Topo-bathymetric DEMs of channels and floodplains with 1-m resolution were constructed for the study reaches by using remotely sensed hyperspectral image data to estimate water...
thumbnail
This data provides river turbidity measurements collected on the Carmel River, CA. Turbidity was measured to study any changes in the Carmel River’s sediment loads following the removal of the San Clemente Dam. The USGS-run DTS-12 turbidity sensor was deployed above the Sleepy Hollow Weir on the Carmel River, CA (instrument was located at 36.445250 degrees North, 121.710494 degrees West). Deployment began on December 9, 2014. After June 16, 2016, the instrument was removed for calibration. A new instrument was re-deployed on October 14, 2016, and continued to record until recovery on July 13, 2017. Due to the instrument removal and calibration, there exists an approximately 4-month long gap in data collection from...


    map background search result map search result map Topographic and sediment grain size data used to evaluate potential habitat for anadromous salmonids on the upper Merced and Tuolumne Rivers in California Topo-bathymetric digital elevation models of the upper Merced and Tuolumne Rivers in California derived from hyperspectral image data and near-infrared LiDAR acquired in 2014 Sediment grain size measurements from the upper Merced and Tuolumne Rivers in California Topographic survey transect data along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Grain size data from the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Topographic survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Turbidity data from the Carmel River, central California, 2014 to 2017 High resolution topography for two pools on the Carmel River, central California, 2014 to 2019 Topographic survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Topographic survey transect data along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Grain size data from the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Sediment grain size measurements from the upper Merced and Tuolumne Rivers in California Topographic and sediment grain size data used to evaluate potential habitat for anadromous salmonids on the upper Merced and Tuolumne Rivers in California Topo-bathymetric digital elevation models of the upper Merced and Tuolumne Rivers in California derived from hyperspectral image data and near-infrared LiDAR acquired in 2014