Filters: Tags: ADCP (X) > partyWithName: Water Resources (X)
48 results (56ms)|
Filters
Date Range
Types Contacts
Categories Tag Types
|
These data are bathymetry (river bottom elevation) in XYZ format, generated from the March 29-30, 2017 and April 13, 2017, bathymetric survey of the East Fork White River at Columbus, Indiana. The bathymetry was collected from approximately the confluence of Driftwood and Flatrock rivers, downstream to the confluence of Haw Creek. Hydrographic data were collected using an acoustic Doppler current profiler (ADCP) with integrated Differential Global Positioning System (DGPS). Data were collected as the surveying vessel traversed the river, approximately perpendicular to the velocity vectors at 55 cross sections which were spaced 200 feet apart along the river. Additional cross sections were collected upstream and...
These geospatial data were collected during the May 24, 2017 topographic and hydrographic survey of Saddle River in the vicinity of New Jersey State Route 17 at Ridgewood, NJ.
These geospatial data were collected during the August 30, 2016 topographic and hydrographic survey of the Wapsipinicon River in the vicinity of US-30 near near Wheatland, IA.
These geospatial data were collected during the August 30, 2016 topographic and hydrographic survey of the Upper Iowa River in the vicinity of IA-76 near Dorchester, IA.
These geospatial data were collected during the May 30-31, 2017 topographic and hydrographic survey of the Snake River at West River Road near Shelley, ID.
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in comma-delimited table format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri and Mississippi Rivers near St. Louis, Missouri, August 3–10, 2020. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the...
These data are bathymetry (river bottom elevation) in XYZ format, generated from the April 4-5, 2017, bathymetric survey of the Rolling Fork and Beech Fork near Boston, Kentucky. The bathymetry was collected from approximately 1.9 miles upstream from Kentucky State Highway 62 on the Beech Fork and approximately 1.5 miles upstream from Kentucky State Highway 62 on the Rolling Fork, to 2.6 miles downstream from Kentucky State Highway 62 on the Rolling Fork. Hydrographic data were collected using an acoustic Doppler current profiler (ADCP) with integrated Differential Global Positioning System (DGPS). Data were collected as the surveying vessel traversed the river, approximately perpendicular to the velocity vectors...
Discharge measurements and velocity mapping surveys were completed at select tie channels located at Nimz Ranch, on the main-stem Kootenai River. Tie channels convey water and sediments between the main river channel and river floodplain waterbodies. The velocity mapping surveys are used to document how the tie channels interact with the main-stem Kootenai River. Similar surveys will be conducted following project construction completion (after 2021). Velocity mapping provides data to support the flow split estimates in the tie channel reconnection. These mapping efforts are a quantitative assessment of the the tie channels role in altering drift, temperature, and floodplain storage. An acoustic Doppler current...
These geospatial data were collected during the May 30-31, 2017 topographic and hydrographic survey of the Snake River at Ferry Butte Road near Blackfoot, ID.
These geospatial data were collected during the September 22, 2016, topographic and hydrographic survey of Smith Branch at S-126, at Columbia, SC.
These data are depth-averaged velocities measured by an acoustic Doppler current profiler (ADCP), as well as continuous depth-averaged velocities from a stationary location measured with an acoustic Doppler velocity meter (ADVM). These data were collected from the July 12-14, 2022, survey of the Ashtabula River near Ashtabula, Ohio. The location of the ADCP data are from approximately 1,500 feet upstream from the Bridge Street bridge to 3,000 feet upstream from the Bridge Street bridge. The ADVM data are from approximately 41° 53' 46.4"N, 80° 47' 39.5"W. ADCP data were collected using an integrated global navigation satellite system (GNSS) smart antenna with submeter accuracy. The ADCP and GNSS antenna were mounted...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ADCP,
ADVM,
Ashtabula,
Bathymetry,
Ecology,
A bathymetric survey of Nimrod Lake, Arkansas, was conducted in late April to mid-May, 2016, by the Lower Mississippi-Gulf Water Science Center (LMG WSC) of the U.S. Geological Survey (USGS) using methodologies for sonar surveys similar to those described by Wilson and Richards (2006) and Richards and Huizinga (2018). Point data from the bathymetric survey were merged with point data from an aerial LiDAR survey conducted in December, 2010, that were provided by the U.S. Army Corps of Engineers (USACE), Little Rock District. From the combined point dataset, a terrain dataset (a type of triangulated irregular network, or TIN, model) was created in Esri ArcGIS, version 10.5, for the area within the approximate extent...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ADCP,
AR,
ASCII,
Acoustic,
Arkansas,
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River between Kansas City and St. Louis, Missouri, for dates ranging from 2010 to 2017. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and...
These geospatial data were collected during the June 30, 2016 topographic and hydrographic survey of the Blackfoot River at I-90 near Bonner, MT.
These geospatial data were collected during the June 30, 2016 topographic and hydrographic survey of the Bitterroot River at US-93 near Hamilton, MT.
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in comma-delimited table format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River between Kansas City and St. Louis, Missouri, May 19–26, 2021. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the...
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River in Kansas City, Missouri, for dates ranging from 2010 to 2017. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout the reach. Data collection software integrated and stored the depth data from the MBES and the horizontal and...
These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River in Kansas City, Missouri, in August 2019, as well as special surveys at two of the sites in August and October 2020 before and after installation of scour countermeasures. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ADCP,
ASCII,
Acoustic,
Bathymetry,
Doppler,
These geospatial data were collected during the July 14-26, 2016 topographic and hydrographic survey of the Madison River at I-90, near Three Forks, MT.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The collected hydrographic data consisted of three elements—riverbed elevations derived from bathymetry, depth-averaged streamflow velocity, and instantaneous discharge measurements. Hydrographic data were collected as the boat moved across the river at planned cross sections...
|
|
