Filters: Tags: Bronx County (X) > Types: OGC WFS Layer (X)
3 results (95ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
This data set contains continuous water-surface elevation and water-quality (temperature, specific conductance, salinity, and turbidity) data recorded at 6- and 15-minute intervals, respectively, from two sites in the Bronx on the Harlem River -- Roberto Clemente State Park and Mill Pond Park. Water elevation was monitored every second to detect changes indicative of boat wakes expected to resuspend bed sediment from nearby alcoves. Boat wake detection triggered the collection of 1-second interval water elevation and 1-minute interval turbidity data. In addition to continuous data, grab samples for fecal indicator bacteria (Enterococci) and total suspended solids were collected weekly from - March to September,...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bronx County,
Contaminants, Microbial,
New York City,
New York County,
Surface-Water Quality Monitoring,
Problem Previous hydrologic studies have indicated that there may be sufficient water resources underlying Richmond, New York, and Bronx Counties for use as a supplemental water supply by the New York City Department of Environmental Protection (NYCDEP) in times of a drought or other water shortage. Unfortunately, comprehensive data on the quantity and quality of the Counties' water resources are not available to make an accurate assessment. In order to evaluate the availability and suitability of these resources, representative and timely data on the ground-water and surface-water resources of these three Counties are needed. Objectives The primary objective is to develop, operate, and maintain long-term monitoring...
Categories: Data,
Project;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Bronx County,
Completed,
Cooperative Water Program,
GW or SW,
GW or SW,
From March 2019 to September 2020, the U.S. Geological Survey, in cooperation with the New York City Department of Design and Construction and the New York State Department of Environmental Conservation, collected horizontal-to-vertical seismic (HVSR) surveys at 140 locations in New York, Bronx, Queens, Nassau, and Suffolk counties to estimate the thickness of unconsolidated sediments and the depth to bedrock (Lane and others, 2008). The passive-seismic method uses a single, broad-band three-component (two horizontal and one vertical) seismometer to record ambient seismic noise. In areas that have a strong acoustic contrast between the bedrock and overlying sediments, the seismic noise induces resonance at frequencies...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Aquifer Mapping,
Basin & Hydrogeologic Characterization,
Bedrock,
Bronx County,
Nassau County,
|
|
