Filters: Tags: DEM (X) > Categories: Data (X)
54 results (11ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data;
Tags: 3D Elevation Program,
3DEP,
American Society of Photogrammetry and Remote Sensing,
Base Maps,
Bathymetric,
The Louisiana State Legislature created Coastal Wetlands Planning, Protection, and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed persuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the Channel Armor Gap Crevasse (MR-06) project for 2016. This data set is used as a basemap land/water classification. It also serves as a visual tool for project managers to help them identify any obvious problems or land loss within their project...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: BA-02,
CWPPRA,
Coastal Louisiana,
DEM,
DOQQ,
LiDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LiDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Contour,
DEM,
Illinois,
Surface Model,
US,
The 90m DEM for Wyoming contains elevation in meters for each 90m cell making up the raster data. In order to conserve space, the DEM was converted from floating point data to integer values. This dataset was converted from US Geological Survey's 1-Degree digital elevation models for Wyoming consisting of a sampled array of elevations for ground positions; see the USGS National Mapping Program's Data User Guide for the DEMs for complete information about the DEM.
This section of the data release includes the spatial metadata geospatial polygon feature dataset (.shp file) that contains spatial footprints for each input source dataset used to develop the topobathymetric dataset of Great Salt Lake. The attributes for each footprint polygon describe the characteristics of each input dataset used to generate the topobathymetric dataset.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 3D Elevation Program,
3DEP,
Acoustic Sonar,
Antelope Island,
Bear River,
This dataset is a LAS (industry-standard binary format for storing lidar point clouds) dataset containing light detection and ranging (lidar) data and sonar data representing the beach and near-shore topography of Lake Superior at Minnesota Point, near the Duluth entry, Duluth, Minnesota. Average point spacing of the LAS files in the dataset are as follows: lidar, 0.094 meters (m); multibeam sonar, 0.501 m; single-beam sonar, 1.876 m. The LAS dataset was used to create digital elevation models (DEMs) of 10 m (32.8084 feet) and 1 m (3.28084 feet) resolution, of the approximate 1.75 square kilometer surveyed area. Lidar data were collected August 22, 2022 using a boat mounted Velodyne VLP-16 unit and methodology similar...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Bathymetry and Elevation,
DEM,
Duluth,
Great Lakes,
Hydroacoustic,
The Louisiana State Legislature created Coastal Wetlands Planning, Protection, and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed pursuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the Pelican Island and Pass La Mer to Chaland Pass Resoration (BA-38) project for 2013. This data is used as a basemap habitat classification. It also serves as a visual tool for project managers to help them identify any obvious problems or land...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: BA-38,
CWPPRA,
Coastal Louisiana,
DEM,
DOQQ,
This project evaluates the effects of global climate change and sea level rise on estuarine intertidal habitat in the San Francisco Bay and the Pacific Flyway migratory waterbirds that rely on this habitat. Phase 2 of this project is a continuation of work to evaluate the effects of global climate change and sea level rise (SLR) on intertidal shoals in the San Francisco Bay Estuary and the migratory waterbirds that rely on this critically important resource in the Pacific Flyway. The primary objectives are to: 1) use downscaled global climate change models to translate SLR and climate scenarios into habitat quantity predictions through Delft3D and Dflow-FM (unstructured grid) geomorphic modeling; 2) model the response...
Categories: Data,
Project;
Tags: 2010,
2012,
Applications and Tools,
CA,
California Landscape Conservation Cooperative,
These data are digital elevation models (DEMs) of the beach topography and near-shore bathymetry of Lake Superior at Minnesota Point, near the Superior entry, Duluth, Minnesota. The DEMs have 1 meter (m; 3.28084 ft) and/or 10 m (32.8084 ft) cell size and was created from a LAS dataset of terrestrial light detection and ranging (LiDAR) data representing the beach topography and sonar data representing the bathymetry for an approximate 1.78 square kilometer survey area. Average point spacing of the LAS files in the dataset are as follows: lidar, 0.055 meters (m); multibeam sonar, 0.511 m; single-beam sonar, 1.687 m. Lidar data were collected November 01, 2022 using a boat mounted Velodyne VLP-16 unit and methodology...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Bathymetry and Elevation,
DEM,
Duluth,
Great Lakes,
Hydroacoustic,
This dataset is a LAS (industry-standard binary format for storing lidar point clouds) dataset containing light detection and ranging (lidar) data and sonar data representing the beach and near-shore bathymetry of Lake Superior at Minnesota Point, near the Duluth entry, Duluth, Minnesota. Average point spacing of the LAS files in the dataset are as follows: lidar, 0.055 meters (m); multibeam sonar, 0.511 m; single-beam sonar, 1.687 m. The LAS dataset was used to create digital elevation models (DEMs) of 10 m (32.8084 feet) and 1 m (3.28084 feet) cell size, of the approximate 1.78 square kilometer surveyed area. Lidar data were collected November 01, 2022 using a boat mounted Velodyne VLP-16 unit and methodology...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Bathymetry and Elevation,
DEM,
Duluth,
Great Lakes,
Hydroacoustic,
A side scan image collected with Humminbird Helix 10 on November 14, 2019. Side scan sonar creates a picture or an image of the riverbed. To generate an image, side scanners measures the strength of how loud the return sonar pings are.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: DEM,
Hydroacoustic,
Illinois,
Iowa,
Lock and Dam 19,
This dataset represents elevation for the Northern U.S. and Canada. This Digital Elevation Model (DEM) was created by mosaicing two datasets: 1. U.S. Geological Survey's (USGS) 30 meter National Elevation Dataset (NED) , ~1 arc-second data that is updated over large areas by integrating the 10 meter or better source data (where available), re-sampled to 1 arc-second. 2. The Canadian Digital Elevation Data, Level 1 (CDED1) The Center of Topographic Information (CTI) jointly produces the CDED with federal, provincial, and territorial government agencies as well as the private sector. The CDED consists of an ordered array of ground or reflective surface elevations, recorded in meters, at regularly spaced intervals....
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: DEM,
NED,
land surface,
topography
The Louisiana State Legislature created Coastal Wetlands Planning, Protection, and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed persuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the Atchafalaya Sediment Delivery (AT-02) project for 2016. This data set is used as a basemap for habitat classification. It also serves as a visual tool for project managers to help them identify any obvious problems or land loss within their...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: AT-02,
CWPPRA,
Coastal Louisiana,
DEM,
DOQQ,
Mount Adams, also known by the Native American names "Klickitat" or "Pahto", is a 3,742 meter-tall (12,278 feet) stratovolcano located 53 km (33 miles) north of the Columbia river straddling the borders of Skamania County, Yakima County and the Yakama Nation Reservation. Mount Adams lies in the middle of the Mount Adams volcanic field—a 1,250 square kilometer area (about 480 square miles) comprising at least 120, mostly basaltic volcanoes that form spatter and scoria cones, shield volcanoes, and some extensive lava flows. The volcanic field has been active for at least the past one million years. Mount Adams was active from about 520,000 to about 1,000 years ago and has erupted mostly andesite. Eruptions have occurred...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Bare Earth,
Bare Earth Hydroflattened,
Breaklines,
Clark County,
DEM,
The 90m DEM for Wyoming contains elevation in meters for each 90m cell making up the raster data. In order to conserve space, the DEM was converted from floating point data to integer values. This dataset was converted from US Geological Survey's 1-Degree digital elevation models for Wyoming consisting of a sampled array of elevations for ground positions; see the USGS National Mapping Program's Data User Guide for the DEMs for complete information about the DEM.
Categories: Data;
Types: Downloadable;
Tags: DEM,
Wyoming,
Wyoming State,
digital elevation model,
elevation,
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava domes were extruded during the subsequent eruptive periods of 1980-1986 and 2004-2008. During 2017, U.S. Forest Service contracted the acquisitions of airborne lidar surveys of Mount St. Helens and upper North Fork Toutle River basin, part of a larger 2017-2018 survey of the Gifford Pinchot National Forest. The U.S. Geological Survey combined and reprojected 81 raster datasets, provided by the U.S. Forest Service in October 2018, into a single digital elevation model (DEM) of the ground surface, including beneath forest cover (that is, 'bare earth')....
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: ALS,
Cascade Range,
Cowlitz County,
DEM,
Ecology,
The overarching goal of this research was to use site-specific data to develop local and regionally-applicable climate change models that inform management of tidal wetlands along the Pacific Northwest coast. The overarching questions were: (1) how do tidal marsh site characteristics vary across estuaries, and (2) does tidal marsh susceptibility to sea-level rise (SLR) vary along a latitudinal gradient and between estuaries? These questions are addressed in this data collection with three specific objectives: (1) measure topographical and ecological characteristics (e.g., elevation, tidal range, vegetation composition) for tidal marsh and intertidal mudflats, (2) model SLR vulnerability of these habitats, and (3)...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: 2012,
Bolinas Lagoon,
CA,
CASC,
California,
A slope raster generated from multibeam bathymetry and terrestrial lidar collected simultaneously on November 14, 2019. Slope represents the rate of change of elevation under the water column.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: DEM,
Hydroacoustic,
Illinois,
Iowa,
Lock and Dam 19,
The elevation contours in this dataset have a 2-foot (ft) interval and were derived from a digital elevation model (DEM) of beach topography and nearshore bathymetry of Lake Superior at Minnesota Point, Duluth, Minnesota. The DEM has a 1 meter (m; 3.28084 ft) cell size and was created from Lidar data representing beach topography and sonar data representing bathymetry extending approximately 700-800 m offshore. The data cover an approximately 1.75 square kilometer survey area. Lidar data were collected November 01, 2022 using a boat mounted Velodyne VLP-16 unit and methodology similar to that described by Huizinga and Wagner (2019). Multibeam sonar data were collected October 31-November 01, 2022 using a Norbit...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Bathymetry and Elevation,
DEM,
Duluth,
Great Lakes,
Hydroacoustic,
This project uses bottom-up modeling at a parcel scale to measure the effects of sea-level rise (SLR) on coastal ecosystems and tidal salt marshes. At selected tidal marshes, the project team will measure several parameters that will be incorporated into ArcGIS models creating comparable datasets across the Pacific coast tidal gradient with a focus on 2-4 sites in the California LCC (e.g. San Diego, San Francisco Bay Refuges). The ultimate goal is to provide science support tools for local adaptation planning from the bottom-up that may be implemented under a structured decision-making framework.Science Delivery Phase (2013): The objectives are to: (1) Disseminate site-specific baseline data and modeling results,...
|
|