Filters: Tags: Geomorphology (X)
2,157 results (22ms)|
Filters
Date Range
Extensions (Less)
Types (Less)
Contacts (Less)
Categories (Less)
Tag Types
|
We used the 1981 historical imagery of the Escalante River, Utah in ArcGIS to quantify channel area and average width and quantify woody riparian vegetation cover in two reaches of the river. Reach 1 was approximately 15 river kilometers (rkms) long and located between Sand and Boulder creeks within Grand Staircase Escalante National Monument. Reach 2 was approximately 16 rkms in length, extending from the Glen Canyon National Recreation Area boundary to just upstream of Choprock Canyon. We delineated the extent of active channel. Active channel was defined as the portion of the channel free of vegetation. We also delineated fluvial geomorphic features such as point bars, mid-channel bars, lateral bars and floodplain....
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Escalante River, Utah,
Riparian ecosystems,
Southwestern U.S.,
biota,
channel narrowing,
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
Lidar data was collected on 24 and 25 May 2017 at the USGS debris-flow flume to monitor two gate-release debris flow experiments. A static prism of sediment was emplaced behind a gate at the top of the flume. Water was added via sprinklers to the surface and also via pipes to the subsurface, in order to saturate the sediment mass. The sediment mass moved down the flume as a debris flow when the gate was opened. Lidar data were collected from a Riegl VZ-400 terrestrial laser scanner to capture the mass failure. The laser scanner was modified, so that rather than scanning in a 360 degree motion, as it is designed, it only scanned a narrow swath (approximately 1 mm) along the full profile of the constructed sediment...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
These digital images were taken at select locations over the Potomac River using 3DR Solo unmanned aircraft systems (UAS) in October 2019. These images were collected for the purpose of evaluating UAS assessment of river habitat data such as water depth, substrate type, and water clarity. Each UAS was equipped with a Ricoh GRII digital camera for natural color photos, used to produce digital elevation models and ortho images, a MicaSense RedEdge multi-spectral camera that captures five specific bands of the visible spectrum (blue, green, red, rededge, and near-infrared), which can be used to classify vegetation, or FLIR Vue Pro R 640 13mm radiometric thermal camera that provides temperature data embedded in every...
We used the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST; Warner and others, 2010) model to simulate ocean circulation, waves, and sediment transport in Barnegat Bay, New Jersey, during Hurricane Sandy. The simulation period was from October 27 to November 4, 2012. Initial conditions for the salinity and temperature fields in the domain were acquired from a 7-month simulation of the same domain (Defne and Ganju, 2018). We used a 2012 digital terrain model (Andrews and others, 2015) to prescribe the prestorm bathymetry. Wetting and drying was enabled, wave-current interaction was modeled with a boundary-layer formulation accounting for the apparent roughness of waves, and the vortex force formulation...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geomorphology,
Marine Geology
This dataset describes the hydrogeomorphic structure and lake-tributary mixing in three intermediate-sized Lake Michigan rivermouths: Ford River, Manitowoc River, and Pere Marquette River. Data were collected from May to October 2011. Water chemistry variables were measured with a multiparameter sonde along longitudinal, lateral, and vertical transects. Magnesium, boron, and stable water isotope concentrations were also determined from grab water samples at particular depths.
These data were compiled for investigating the relationship between acoustic backscattering by riverbeds composed of various riverbed substrates (bed sediment), and for developing and testing a probabilistic model for substrate classification based on high-frequency multibeam acoustic backscatter. The model is described in Buscombe et al. (2017). The data consist of various quantities on coincident grids, from various sites along the Colorado River in Grand Canyon, including water depth, bed roughness, the area (or footprint) of the acoustic beam, unfiltered and filtered backscatter magnitude, sediment classification (for each location, 1 of 5 sediment classes in a categorical scheme), and the probabilities for...
This ESRI geodatabase consists of 5 feature datsets with 23 individual polygon feature classes and two raster datasets. A master campsite polygon feature class represents the boundaries of campsites identified in the 1973, 1984, and 1991 campsite inventories of the Colorado River corridor in Grand Canyon, Arizona. The other polygon feature classes represent camp locations along the Colorado River corridor in Grand Canyon, Arizona during different survey periods using different surveying techniques. The raster datasets represent sub-aerial and sub-surface sandbar surfaces at 37 long term-monitoring sites between Lees Ferry and Diamond Creek, Arizona in Grand Canyon National Park, measured in September and October...
To support research on remote sensing of rivers, hyperspectral image data and supporting field measurements of water depth obtained with a multibeam echosounder were acquired from a segment of the Kootenai River in northern Idaho, September 26 and 27, 2017. These data sets also facilitate efforts to characterize in-stream habitat for sturgeon, understand and model dispersion processes, and monitor geomorphic change along the Kootenai River. This parent data release includes links to child pages for the following data sets: 1) airborne hyperspectral image data acquired from a conventional, manned, fixed-wing aircraft; 2) ground-based depth measurements obtained during a multibeam echosounder survey; and 3) in...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Aquatic Biology,
Bathymetry,
Geomorphology,
Idaho,
Kootenai River,
This data release consist of the annual sediment depositional volume at five floodplain and five point bar sites on Powder River in southeastern Montana from 1979 through 2017. These 10 sites are a subgroup of a larger group of cross-sections established in 1975 and 1977 to monitor the channel changes along a 90-kilometer reach of Powder River. In addition to the sediment deposition data, characteristic of the annual peak flood are listed. The data are in 1 Excel files containing worksheets (10) corresponding to each channel cross-section .
Categories: Data;
Tags: Geomorphology,
High Plains,
Powder River,
Powder River Basin,
Powder River County,
The Middle Fork Willamette River basin encompasses 3,548 square kilometers of western Oregon and drains to the mainstem Willamette River. Fall Creek basin encompasses 653 square kilometers and drains to the Middle Fork Willamette River. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey evaluated geomorphic responses of downstream river corridors to annual drawdowns to streambed at Fall Creek Lake. This study of geomorphic change is focused on the major alluvial channel segments downstream of the U.S. Army Corps of Engineers’ dams on Fall Creek and the Middle Fork Willamette River, as well as the 736 hectare Fall Creek Lake. Reservoir erosion during streambed drawdown results in sediment...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Fall Creek,
Fall Creek Lake,
Jasper, Oregon,
Lane County,
Middle Fork Willamette River,
The Middle Fork Willamette River basin encompasses 3,548 square kilometers of western Oregon and drains to the mainstem Willamette River. Fall Creek basin encompasses 653 square kilometers and drains to the Middle Fork Willamette River. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey evaluated geomorphic responses of downstream river corridors to annual drawdowns to streambed at Fall Creek Lake. This study of geomorphic change is focused on the major alluvial channel segments downstream of the U.S. Army Corps of Engineers’ dams on Fall Creek and the Middle Fork Willamette River, as well as the 736 hectare Fall Creek Lake. Reservoir erosion during streambed drawdown results in sediment...
Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly available data products, such as lidar, orthophotography, and geomorphic feature sets derived from those, to extract metrics of barrier island characteristics at consistent sampling distances. The metrics are then incorporated...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Atlantic Ocean,
Barrier Island,
Bayesian Network,
CMHRP,
Cape Cod,
Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly available data products, such as lidar, orthophotography, and geomorphic feature sets derived from those, to extract metrics of barrier island characteristics at consistent sampling distances. The metrics are then incorporated...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Atlantic Ocean,
Barrier Island,
CMHRP,
Cape Lookout,
Cape Lookout,
Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly available data products, such as lidar, orthophotography, and geomorphic feature sets derived from those, to extract metrics of barrier island characteristics at consistent sampling distances. The metrics are then incorporated...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Atlantic Ocean,
Barrier Island,
Bayesian Network,
CMHRP,
Coastal Erosion,
Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly available data products, such as lidar, orthophotography, and geomorphic feature sets derived from those, to extract metrics of barrier island characteristics at consistent sampling distances. The metrics are then incorporated...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assateague Island,
Assateague Island,
Assateague Island National Seashore,
Assateague Island National Seashore,
Atlantic Ocean,
|
|
