Filters: Tags: National Vegetation Classification System (X)
19 results (39ms)|
Filters
Contacts
(Less)
|
The geographic information system (GIS) format spatial data set of vegetation for Moores Creek National Battlefield (MOCR) was created by the National Park Service (NPS) Southeast Coast Inventory and Monitoring Network (SECN). The MOCR covers an area of approximately 70 ha (173 acres). The map classification scheme used to create the vegetation data set is designed to represent local plant communities at the finest level possible using the National Vegetation Classification System. The vegetation data set was developed by interpreting aerial photographs collected in 2009 and extensive field surveys. Individuals who cooperated in this project include: the Southeast Regional Office of NatureServe and the NPS SECN....
The geographic information system (GIS) format spatial data set of vegetation for Apostle Islands National Lakeshore (APIS) was created for the National Park Service (NPS) Vegetation Inventory Program (VIP). The APIS covers an area of approximately 28,972 ha (71,591 acres). The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification (NVC) Standard (Vr 2). Physiognomic information was also recorded, including height (woody vegetation), canopy density, and coverage patterns. The vegetation data set was developed by interpreting aerial photographs collected in 2004 and extensive field surveys....
The vegetation spatial database coverage (vegetation map) is a product of the Effigy Mounds National Monument Vegetation Mapping Project, USGS-NPS Vegetation Mapping Program (VMP). The U.S. Geological Survey (USGS) Upper Midwest Environmental Sciences Center (UMESC) in La Crosse, Wisconsin, and the Minneapolis Office of NatureServe in Minneapolis, Minnesota, have completed mapping and classification of existing plant communities of Effigy Mounds National Monument (EFMO) and extended surroundings. Photointerpreters, ecologists, and botanists collaborated to describe National Vegetation Classification System (NVCS) plant communities (associations) and determine how best to map them using aerial photographs. --- Two...
High resolution vegetation polygons mapped by the National Park Service. The vegetation units of this map were determined through stereoscopic interpretation of aerial photographs supported by field sampling and ecological analysis. The vegetation boundaries were identified on the photographs by means of the photographic signatures and collateral information on slope, hydrology, geography, and vegetation in accordance with the Standardized National Vegetation Classification System (October 1995). The mapped vegetation primarily reflects conditions that existed during 1994 and 1995. Several sets of aerial photography were utilized for this project: 1) NOAA 1:24,000 March 1994 Natural Color Prints (Leaf Off) covering...
The geographic information system (GIS) format spatial data set of vegetation for Buffalo National River (BUFF) was created for the National Park Service (NPS) Vegetation Inventory Program (VIP). The BUFF administrative boundary covers an area of nearly 38,000 ha. The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification Standard (NVCS) Version 2. Physiognomic information was also recorded, including height (woody vegetation), canopy density, and coverage patterns. The vegetation data set was developed by interpreting aerial photographs collected in October of 2006 and extensive field...
The geographic information system (GIS) format spatial data set of vegetation for Grand Portage National Monument (GRPO) was created by the National Park Service (NPS) Vegetation Inventory Program (VIP). The GRPO covers an area of approximately 291.8 ha (721.1 acres). The map classification scheme used to create the vegetation data set is designed to represent local plant communities at the finest level possible using the National Vegetation Classification System. Physiognomic information was also recorded, including tree height, canopy density, and coverage patterns. The vegetation data set was developed by interpreting aerial photographs collected in 2006 and extensive field surveys. Individuals who cooperated...
The geographic information system (GIS) format spatial data set of vegetation for Indiana Dunes National Lakeshore (INDU) was created by the U.S. Geological Survey (USGS)-National Park Service (NPS) Vegetation Mapping Program (VMP). The INDU covers an area of approximately 37,050 ha (15,000 acres), and includes approximately 15 miles of Lake Michigan shoreline. Indiana Dunes National Lakeshore is divided into seven units (East Unit, West Unit, Calumet Prairie, Heron Rookery, Hobart Prairie Grove, Hoosier Prairie, and Pinhook Bog). The map classification scheme used to create the vegetation data set is designed to represent local plant communities at the finest level possible using the National Vegetation Classification...
The geographic information system (GIS) format spatial data set of vegetation for Waterton Lakes National Park (WLNP) was created by the U.S. Geological Survey (USGS)-National Park Service (NPS) Vegetation Mapping Program (VMP) for the Waterton-Glacier International Peace Park (WGIPP). The WGIPP covers an area of approximately 458,556 ha (1,133,116 acres), and includes approximately 30.5 km (19 miles) of the Canada-United States International Boundary. The Canadian portion of this park (WLNP) is located in southwest Alberta, Canada. The map classification scheme used to create the vegetation data set is designed to represent local plant communities at the finest level possible using the National Vegetation Classification...
The Katahdin Woods and Waters National Monument Seboeis Unit Vegetation Mapping Project was initiated in the fall of 2019 by a grant through the USGS Natural Resource Preservation Program to classify and map vegetation types of the Seboeis Unit thereby providing resource managers and biological researchers with useful baseline vegetation information. These data are the results of the field effort to collect accuracy assessment data for testing the Katahdin Woods and Waters National Monument Seboeis Unit Vegetation Mapping Project vegetation map. Data collection was assisted by Jennifer Tibbetts, David Rubin, and Tiffany Reese. An accuracy assessment was performed on the draft version of the vegetation map layer....
The vegetation units on this map were determined through the stereoscopic interpretation of aerial photographs supported by field sampling and ecological analysis. The vegetation boundaries were identified on the photographs by means of the photographic signature and collateral information on slope, hydrology, geography, and vegetation in accordance with the Standardized National Vegetation Classification System (October 1995). The mapped vegetation reflects conditions that existed during the specific year and season that the aerial photographs were taken. There is a margin of error inherent in the use of aerial photographs. Therefore, a detailed ground and historical analysis of a single site may result in a revision...
This dataset defines the symbology for the landcover map of the Natchez Trace Parkway. The map shows the distribution of 18 landcover classes based on the National Vegetation Classification Standard. Ground-based vegetation classification was provided by National Park Service (NPS). The mapping output and layer delineate grasses, road-developed areas, scrub-shrub, shrubland, plantation, water bodies, areas of white oak, oak, pine-oak, pine-cedar, pine-sweetgum, sweetgum (including sweetgum-oak), scattered trees, swamp forest, irregular classes, aquatic vegetation, invasive species, canopy gaps, and clouds. Mapped classes that have been digitized are noted with an asterisk (*) in the legend.
This metadata is for the vegetation land-cover and land-use spatial database created for Knife River Indian Villages National Historic Site
The geographic information system (GIS) format spatial data set of vegetation for Saint Croix National Scenic Riverway (SACN) was created for the National Park Service (NPS) Vegetation Inventory Program (VIP). The SACN administrative boundary covers an area of nearly 39,500 ha. The project boundary for the SACN vegetation mapping project covers an areas of just over 68,200 ha with the approximate 300 m buffer. The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification Standard (NVCS) Version 2. Physiognomic information was also recorded, including height (woody vegetation), canopy density,...
The geographic information system (GIS) format spatial data set of vegetation for Pictured Rocks National Lakeshore (PIRO) was created by the National Park Service (NPS) Vegetation Inventory Program (VIP). The PIRO covers an area of approximately 36,046 ha (89,072 acres). The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification (NVC) Standard (Vr 2). Physiognomic information was also recorded, including height (woody vegetation), canopy density, and coverage patterns. The vegetation data set was developed by interpreting aerial photographs collected in 2005 and extensive field surveys....
The geographic information system (GIS) format spatial data set of vegetation for Sleeping Bear Dunes National Lakeshore (SLBE) was created for the National Park Service (NPS) Vegetation Inventory Program (VIP). The SLBE covers an area of over 24,000 ha (59,305 acres) and over 28,000 ha (69,190 acres) with the ~400 m surface water jurisdiction into Lake Michigan included. The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification Standard (NVCS) Version 2. Physiognomic information was also recorded, including height (woody vegetation), canopy density, and coverage patterns. The vegetation...
The U.S. Geological Survey (USGS) Upper Midwest Environmental Sciences Center (UMESC) has produced the Vegetation Spatial Database Coverage (vegetation map) for the Acadia National Park Vegetation Mapping Project, USGS-NPS Vegetation Mapping Program (VMP). The vegetation map is of Acadia National Park (NP) and extended environs, providing 99,693 hectares (246,347 acres) of map data. Of this coverage, 52,872 hectares (130,650 acres) is non-vegetated ocean, bay, and estuary (53% of coverage). Acadia NP comprises 19,276 hectares (47,633 acres) of the total data coverage area (19%, 40% not counting ocean and estuary data). Over 7,120 polygons make up the coverage, each with map class description and, for vegetation...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Acadia National Park,
Acadia National Park Vegetation Mapping Project,
Bar Harbor,
Digital Spatial Database,
Hancock County,
The geographic information system (GIS) format spatial data set of vegetation for Cuyahoga Valley National Park (CUVA) was created for the National Park Service (NPS) Vegetation Inventory Program (VIP). The CUVA administrative boundary covers an area of nearly 13,000 ha. The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification Standard (NVCS) Version 2. Physiognomic information was also recorded, including height (woody vegetation), canopy density, and coverage patterns. The vegetation data set was developed by interpreting aerial imagery collected in October of 2010 and extensive...
The geographic information system (GIS) format spatial data set of vegetation for for the Oregon Caves National Monument (ORCA) and proposed expansion area vegetation mapping and inventory project was created for the National Park Service (NPS) Vegetation Inventory Program (VIP). The project area covers over 1820 ha (4499 acres). The map classification scheme used to create the vegetation data set is designed to represent local vegetation types at the finest level possible using the National Vegetation Classification Standard (NVCS) Version 2. The associations present in each map unit are also coded into the database. Vegetation plot sampling was conducted to describe the associations and to develop the map classification...
The Katahdin Woods and Waters National Monument Seboeis Unit Vegetation Mapping Project was initiated in the fall of 2019 by a grant through the USGS Natural Resource Preservation Program to classify and map vegetation types of the Seboeis Unit thereby providing resource managers and biological researchers with useful baseline vegetation information. These data are the results of the field effort to collect vegetation plots data for testing the Katahdin Woods and Waters National Monument Seboeis Unit Vegetation Mapping Project vegetation map. Data collection was assisted by Jennifer Tibbetts and Jamie Attanasio. During summer 2019, botanists with the Maine Natural Areas Program collected data from 94 vegetation...
|
|
