Skip to main content
Advanced Search

Filters: Tags: Nimbus Dam (X) > Types: OGC WMS Service (X)

6 results (45ms)   

View Results as: JSON ATOM CSV
thumbnail
An unmanned aerial system (UAS) was used to acquire red/green/blue (RGB) and hyperspectral image data from the American River in California November 5-7, 2018, to support research on remote sensing of rivers, specifically mapping chinook salmon spawning locations (redds) as part of an overall salmon habitat assessment program. The RGB images were acquired uisng a DJI MAtrice 210 equipped with a Zenmuse 4S optical camera. Imagery was collected along several parallel flight lines to ensure full coverage of the study reach. Raw Zenmuse images were georeferenced using real-time kinematic (RTK) global positioning system (GPS) and inertial motion unit (IMU) data recorded onboard the UAS and individual flight strips were...
thumbnail
This child data release includes field spectra obtained as part of a study focused on mapping chinook salmon spawning locations along the American River near Sacramento, California, via remote sensing; the data were collected November 5-7, 2018. The purpose of this study was to develop and test a spectrally based technique for identifying salmon spawning locations, known as redds, from various types of remotely sensed data. Traditionally, redds have been mapped by eye while walking the bank or from a boat, or by an observer in an aircraft or an interpreter visually examining aerial images. The goal of this proof-of-concept investigation was to assess the potential for more efficient, objective, and automated...
thumbnail
A high-resolution (10-meter per pixel) digital elevation model (DEM) was created for the Sacramento-San Joaquin Delta using both bathymetry and topography data relative to current modern datum of North American Vertical Datum of 1988 (NAVD88). This DEM is the result of collaborative efforts of the U.S. Geological Survey (USGS) and the California Department of Water Resources (DWR). The base of the DEM is from a 10-m DEM released in 2004 and updated in 2005 (Foxgrover and others, 2005) that used Environmental Systems Research Institute (ESRI), ArcGIS Topo to Raster module to interpolate grids from single beam bathymetric surveys collected by DWR, the Army Corp of Engineers (COE), the National Oceanic and Atmospheric...
thumbnail
Field measurements of water depth were acquired from a reach of the upper American River in California, November 5-7, 2018, to support research on mapping chinook salmon spawning locations (redds) via remote sensing. The depth measurements included in this data release were obtained by wading the shallow channel margins with RTK GPS receivers and measuring water surface elevations along the water's edge and bed elevations within the channel; depths were calculated by subtracting bed elevations from the nearest water surface elevation. For the deeper areas representing most of the channel, depths were recorded along a series of cross-sections by a SonTek RiverSurveyor S5 acoustic Doppler current profiler (ADCP) deployed...
thumbnail
This data release includes images and field measurements used to map chinook salmon spawning locations along the American River near Sacramento, California, via remote sensing; the data were collected November 5-7, 2018. The purpose of this study was to develop and test a spectrally based technique for identifying salmon spawning locations, known as redds, from various types of remotely sensed data. Traditionally, redds have been mapped by eye while walking the bank or from a boat, or by an observer in an aircraft or an interpreter visually examining aerial images. The goal of this proof-of-concept investigation was to assess the potential for more efficient, objective, and automated redd mapping from conventional...
thumbnail
This data release includes images and field measurements used to map chinook salmon spawning locations along the American River near Sacramento, California, via remote sensing; the data were collected November 5-7, 2018. The purpose of this study was to develop and test a spectrally based technique for identifying salmon spawning locations, known as redds, from various types of remotely sensed data. Traditionally, redds have been mapped by eye while walking the bank or from a boat, or by an observer in an aircraft or an interpreter visually examining aerial images. The goal of this proof-of-concept investigation was to assess the potential for more efficient, objective, and automated redd mapping from conventional...
    map background search result map search result map San Francisco Bay-Delta bathymetric/topographic digital elevation model (DEM) Image data and field measurements used to map salmon spawning locations via remote sensing, American River, California, November 5-7, 2018 Field spectra from salmon spawning locations on the American River, California, November 5-7, 2018 Hyperspectral and RGB image data used to map salmon spawning locations on the American River, California, November 5-7, 2018 Salmon spawning locations (redds) mapped in the field along the American River, California, November 5-7, 2018 Field measurements of water depth from the American River, California, November 5-7, 2018 Field spectra from salmon spawning locations on the American River, California, November 5-7, 2018 Hyperspectral and RGB image data used to map salmon spawning locations on the American River, California, November 5-7, 2018 Salmon spawning locations (redds) mapped in the field along the American River, California, November 5-7, 2018 Field measurements of water depth from the American River, California, November 5-7, 2018 Image data and field measurements used to map salmon spawning locations via remote sensing, American River, California, November 5-7, 2018 San Francisco Bay-Delta bathymetric/topographic digital elevation model (DEM)