Filters: Tags: Structural Geology (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
190 results (44ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
New Zealand’s Alpine Fault (AF) ruptures quasi-periodically in large-magnitude earthquakes. Paleoseismological evidence suggests that about half of all recognized AF earthquakes terminated at the boundary between the Central and South Westland sections of the fault. There, fault geometry and the polarity of uplift change. The South Westland AF exhibits oblique-normal fault motion on a structure oriented 055/82SE that, for at least 35 km along strike, contains saponite-rich principal slip zone gouges. New hydrothermal friction experiments reveal that the saponite fault gouge is frictionally weak, exhibiting friction coefficients between =0.12 and =0.16 for a range of temperatures (T=25–210 C) and effective normal...
This data release provides access to a low-altitude, aeromagnetic survey of a part of south-central Washington and north-central Oregon. The survey extends from the Blue Mountains westward to the Cascade Range and covers the Oregon cities of The Dalles, Hermiston, and Milton Freewater and the Washington cities of Richland, Pasco, Kennewick, and Walla Walla. Data were acquired during the summer of 2010 by Goldak Airborne Surveys working under contract to the U.S. Geological Survey. Total magnetic field values were acquired using a fixed-wing aircraft flown at a target elevation of 150 m above terrain (305 m over urban areas) and along flight lines and tie lines spaced 400 m and 4000 m apart, respectively. Flight...
In March 2015, the U.S. Geological Survey acquired seismic reflection and refraction data along an approximately 2.8-km-long profile across northwest-trending San Andreas Fault splays located at the Dos Palmas Preserve east of Salton Sea. To acquire the reflection and refraction data, we collocated shots and geophones, spaced every 3 m along the profile. We used 933 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 925 P-wave shots. We generated P-wave data using one of two active sources: 400-grain Betsy-SeisgunTM shots at approximately every 90 m and a 3.5-kg sledgehammer and steel plate combination at every 3 m between the seisgun shots. All data...
The data release for the geologic terranes of the Hailey 1 x 2 degrees quadrangle and the western part of the Idaho Falls 1 x 2 degrees quadrangle, south-central Idaho is a Geologic Map Schema (GeMS)-compliant version that updates the GIS files for the geologic map published in U.S. Geological Survey (USGS) Bulletin 2064-A (Worl and Johnson, 1995). The updated digital data present the attribute tables and geospatial features (lines and polygons) in the format that meets GeMS requirements. This data release presents the geologic map as shown on the plate and captured in geospatial data for the published map. Minor errors, such as mistakes in line decoration or differences between the digital data and the map image,...
Categories: Data;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Downloadable,
Map Service;
Tags: Ada County,
Blaine County,
Butte County,
Camas County,
Custer County,
Ar/Ar data are reported from minerals and rocks that were collected as part of a mineral resource investigation of the Tonopah, Divide, and Goldfield districts in Nevada. Data are reported from 92 samples and associated standards from eight separate neutron irradiations in the Denver USGS TRIGA reactor, including separated mineral grains and whole rocks. Data were collected by infrared laser heating of irradiated samples, either incremental heating or fusion, and analysis by multi-collector mass spectrometry. The reported data have been corrected for blanks, radioactive decay, and interfering nucleogenic reactions associated with sample irradiation.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: 40Ar/39Ar,
Ar,
Divide district,
Geochemistry,
Goldfield,
Near-surface site characteristics are critical for accurately modeling ground motion, which in turn influences seismic hazard analysis and design of critical infrastructure. Currently, there are many strong motion accelerometers within the Advanced National Seismic System (ANSS) that are missing this information. We use a Geographic Information Systems (GIS) based framework to intersect the site coordinates of approximately 5,500 ANSS accelerometers located throughout the United States and its territories with geology and velocity information. We consider: (1) surficial geology from digitized geologic maps (Horton, 2017; Wilson et al., 2015; Sherrod et al., 2007; Bawiec, 1999; Saucedo, 2005; Bedrossian et al., 2012;...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ANSS,
Alabama,
American Samoa,
Arizona,
Arkansas,
The Colorado Plateau structural province features long monoclinal flexures between uplifts and basins that are the major lines of deformation within and marginal to the Plateau. These folds are named, well-known, and have been described as part of several previous tectonic syntheses of the Colorado Plateau (Kelley, 1955; Davis, 1978; 1999). However, no digital data have ever been created that locate these folds in digital map space. This digital dataset compiles mapped locations of monoclinal folds from several geologic maps from the Colorado Plateau, most released only in “paper”, non-vector format. Fold names and their general map trace were guided by regional-scale maps that synthesize the tectonic elements of...
Compilation of field data collected in the Oregon Coast Range Tyee Formation. Location, strike and dip, Relative composition and bed thickness of interbedded sandstone and siltstone, Schmidt Hammer stiffness, notes, and sampled landslide density are provided. Landslide density is calculated using the manually mapped landslide deposit polygons from LaHusen et al. (2020).
Categories: Data;
Tags: Geomorphology,
Oregon,
Stratigraphy,
Structural Geology,
USGS Science Data Catalog (SDC),
This data release provides digital flight-line and gridded data for a high-resolution airborne magnetic and radiometric survey over the region surrounding the Wet Mountains of southern Colorado, including parts of Custer and Fremont Counties. Data for this survey were collected by Sander Geophysics Limited International (SGL) under contract with the USGS. The survey was flown in June and July of 2021 using a helicopter equipped with a magnetometer mounted in a stinger extending from the nose of the aircraft and a gamma-ray spectrometer stowed onboard. The helicopter pilots followed pre-planned flight paths in a grid-like pattern, with east-west lines spaced 150 meters apart and north-south lines spaced 1,000 meters...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: "Mineral Resources"],
AASG,
Antelope Creek,
Arkansas River,
Association of State Geologists,
This dataset of the elevation of basement and thickness of sediment above the syn- and post-rift unconformity (sediments above being generally Late Cretaceous and younger) was constructed for application to site response models in earthquake hazard analyses. Sediment thickness in meters is provided in zipped csv format on a 0.01-degree grid, and sediment thickness and basement elevation in meters relative to mean sea level are provided in GeoTIFF format on a 1-km grid.
Note: This data release has been superseded, available here: https://doi.org/10.5066/P9MYL7WJ This data release contains processed high-resolution multichannel sparker seismic-reflection (MCS) data that were collected aboard Humboldt State University’s R/V Coral Sea in October of 2018 on U.S. Geological Survey cruise 2018-658-FA on the shelf and slope between Cape Blanco, Oregon, and Cape Mendocino, California. MCS data were collected to characterize quaternary deformation and sediment dynamics along the southern Cascadia margin.
Multichannel minisparker and boomer seismic-reflection and chirp sub bottom data were collected by the U.S. Geological Survey in September of 2013 in Port Valdez, Alaska. Data were collected aboard the USGS R/V Alaskan Gyre during field activity G-01-13-GA. Sub-bottom acoustic penetration spans several hundreds of meters and is variable by location. High-resolution multichannel seismic-reflection data were acquired to support the U.S. Geological Survey Alaska coastal and marine hazards project to explore the sedimentary structure of tsunamigenic landslide deposits around an IODP drill site in Port Valdez. These data and information are intended for science researchers, students from elementary through college, policy...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geophysics,
Seismology,
Structural Geology
High-resolution acoustic backscatter data, bathymetry data, single channel minisparker seismic-reflection data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island and southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder, a 500 Joule SIG 2-mille minisparker sound source and a single channel streamer.
This dataset is intended to provide seamless, integrated geologic mapping of the U.S. Intermountain West region as a contribution to The National Geologic Map supported by the National Cooperative Geologic Mapping Program of the U.S. Geological Survey. Surficial and bedrock geology are included in this data release as independent datasets at a variable resolution from 1:50,000 to 1:250,000 scale. No original interpretations are presented in this dataset; rather, all interpretive data are assimilated from referenceable publications. Derivative polygon features created for this dataset demonstrate the distribution of SIGMa-GeMS Geologic Provinces derived from the distribution of map units. Initial contributions to...
The Leadville North 7.5' quadrangle lies at the northern end of the Upper Arkansas Valley, where the Continental Divide at Tennessee Pass creates a low drainage divide between the Colorado and Arkansas River watersheds. In the eastern half of the quadrangle, the Paleozoic sedimentary section dips generally 20–30 degrees east. At Tennessee Pass and Missouri Hill, the core of the Sawatch anticlinorium is mapped as displaying a tight hanging-wall syncline and foot-wall anticline within the basement-cored structure. High-angle, west-dipping, Neogene normal faults cut the eastern margin of the broad, Sawatch anticlinorium. Minor displacements along high-angle, east- and west-dipping Laramide reverse faults occurred in...
In this database, we compile and host several available onshore and offshore geologic, paleoseismic, geophysical, and instrumental datasets along the Cascadia subduction zone. The ScienceBase data release and downloadable map package is accompanied by an ArcGIS online map and StoryMap.
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geomorphology,
Geophysics,
Marine Geology,
Remote Sensing,
Sedimentology,
Information on the locations and characteristics of faults were collected while conducting fieldwork between 1996 and 2019 in support of geologic mapping in the Buffalo River watershed area of northern Arkansas. A total of 1274 entries on faults were recorded at 452 sites. The observations associated with faults include seven categories of increasing completeness of information.
Categories: Data;
Tags: Arkansas,
Buffalo National River,
Ozarks,
Structural Geology,
USGS Science Data Catalog (SDC),
This dataset comprises a vector shapefile of the Puerto Rico geologic map from Bawiec et al. (1999), clipped to study areas in the Lares, Utuado, and Naranjito municipalities, with a modified basal contact of the Tertiary Lares Limestone (Tla) re-mapped using a lidar-derived digital elevation model (DEM) (USGS, 2018). The limestone unit of interest forms a prominent break in slope with the underlying geologic units, and this break in slope was mapped as the Tla basal contact. Only the southern contact of the Tla unit was modified. References: Bawiec, W.J., ed., 1999, Geology, geochemistry, geophysics, mineral occurrences and mineral resource assessment for the Commonwealth of Puerto Rico: U.S. Geological Survey...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Geomorphology,
Puerto Rico,
Stratigraphy,
Structural Geology,
USGS Science Data Catalog (SDC),
This data release includes 40Ar/39Ar data from the U.S. Geological Survey for samples from Old Mine Park Area, Trumbull, Connecticut. Mineral samples were collected by Robert Wintsch and Harold Moritz. Potassium-bearing mineral grains were separated from the bulk sample and analyzed by argon geochronology at the U.S. Geological Survey Bascom ARgon Dating (BARD) Laboratory in Reston, Virginia. The data provide age constraints on units in the relevant geologic mapping area.
Categories: Data;
Tags: 40Ar/39Ar,
Bascom ARgon Dating Laboratory,
Connecticut,
Economic Geology,
FBGC,
Accurate elevation data in coastal wetlands is crucial for planning for sea-level rise. Elevation surveys were conducted across southwest Florida wetlands to provide ground validation of LiDAR as well as target long-term monitoring stations (surface elevation tables). Surveys were conducted in June 2021 across Ding Darling National Wildlife Refuge, Clam Bay, Rookery Bay National Estuarine Research Reserve, and Ten Thousand Islands National Wildlife Refuge. A combination of post-processed kinematic GPS and differential levelling survey techniques were employed, depending on the canopy cover.
Categories: Data;
Tags: Clam Bay,
Ding Darling National Wildlife Refuge,
Florida,
GPS measurement,
RTK GPS,
|
|
