Filters: Tags: USGS (X) > partyWithName: Earthquake Hazards Program (X)
15 results (74ms)|
Filters
Date Range
Types Contacts
Categories Tag Types Tag Schemes |
The 2002 U.S. Geological Survey (USGS) National Seismic Hazard Maps display earthquake ground motions for various probability levels across the United States and are applied in seismic provisions of building codes, insurance rate structures, risk assessments, and other public policy. This update of the maps incorporates new findings on earthquake ground shaking, faults, seismicity, and geodesy. The resulting maps are derived from seismic hazard curves calculated on a grid of sites across the United States that describe the frequency of exceeding a set of ground motions.
Types: Citation;
Tags: B/C site class boundary,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
We generated digital elevation models (DEMs) using pre- and post-event in-track stereo 0.5 m resolution panchromatic Worldview 1 and 2 images (©2019, DigitalGlobe) using the Surface Extraction from TIN-based Searchspace Minimization (SETSM) software [Noh and Howat, 2015] running on the University of Iowa Argon supercomputer (Table S1). The post-event DEMs exhibit along-track striping artifacts common to the Worldview 2 sensor. While de-striping tools, for example within NASAs Ames Stereo Pipeline [Shean et al., 2016], are commonly applied to resolve this issue, a de-striping correction has not been developed for this latitude. Noh, M.-J., and I. M. Howat (2015), Automated stereo-photogrammetric DEM generation...
The datasets for this investigation consist of microtremor array data collected at: 1) 18 sites in Salt Lake and Utah valleys, Utah, and 2) two sites as part of the Frontier Observatory for Research in Geothermal Energy (FORGE) near Milford, Utah. Each of the 18 sites in the Salt Lake and Utah valleys were acquired with four-sensor arrays with three-component (3C) sensors having flat response from 0.033 Hz to 50 Hz. The data acquired as part of the FORGE investigation used both 3C broadband and 5-Hz geophone sensors. Additional information on these datasets can be found in the supporting documentation provided in this data release as well as in the paper by Zhang and others (2019) that utilized these data.
The “Database of Central and Eastern North American Seismic Velocity Structure” involves the compilation of one-dimensional (1D) seismic velocity-depth functions for central and eastern North America (CENA). The present database is an update of the report by Chulick and Mooney (2002) who present a compilation and statistical analysis of 1D seismic velocity-depth functions for North America and its margins. All seismic velocity-depth functions are extracted from peer-reviewed journal articles, with 86% derived from active-source seismic refraction profiles and the remaining 14% from receiver functions or local earthquake tomography models. No reanalysis of the original seismic field data was undertaken. The database...
Categories: Data;
Tags: EHP,
ESC,
Earthquake Hazards Program,
Earthquake Science Center,
Geophysics,
The updated 2018 National Seismic Hazard Model includes new ground motion models, aleatory uncertainty, and soil amplification factors for the central and eastern U.S. and incorporates basin depths from local seismic velocity models in four western U.S. (WUS) urban areas. These additions allow us, for the first time, to calculate probabilistic seismic hazard curves for an expanded set of spectral periods (0.01 s to 10 s) and site classes (VS30 = 150 m/s to 1,500 m/s) for the conterminous U.S. (CONUS), as well as account for amplification of long-period ground motions in deep sedimentary basins in the Los Angeles, San Francisco Bay, Salt Lake City, and Seattle regions. Ground motion data for 2, 5, and 10 percent...
Categories: Data,
Data Release - Revised;
Tags: Conterminous U.S.,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
The Global Vs30 Server allows a user to select from a map or input a rectangular region of interest. It then provides (optionally) a Vs30 grid in ASCII or GMT grid format, and a JPEG Vs30 map. Wald et al. (2004) first, and Wald and Allen (BSSA, 2007, in press), more fully, describe a methodology for deriving maps of seismic site conditions using topographic slope as a proxy. Vs30 measurements (the average shear-velocity down to 30 m) are correlated against topographic slope to develop two sets of coefficients for deriving Vs30: one for active tectonic regions that possess dynamic topographic relief, and one for stable continental regions where changes in topography are more subdued.
Types: Citation;
Tags: Earth,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
USGS,
The significant rise in seismicity rates in Oklahoma and Kansas (OK–KS) in the last decade has led to an increased interest in studying induced earthquakes. Although additional instruments have been deployed in the region, there are still relatively few recordings at the distances (<20 km) and magnitudes (M4+) most relevant to earthquake hazard. In contrast, the USGS Did You Feel It? (DYFI) system has collected more than 200,000 observations during this period with 22,000+ observations at distances less than 20 km. This dataset has already been used to study the unique characteristics of induced earthquakes, to evaluate the extent of felt area, shaking, and damage, to compare intensity and ground motion metrics,...
Types: Citation;
Tags: DYFI,
Did You Feel It,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
The 2014 U.S. Geological Survey (USGS) National Seismic Hazard Maps display earthquake ground motions for various probability levels across the United States and are applied in seismic provisions of building codes, insurance rate structures, risk assessments, and other public policy. The updated maps represent an assessment of the best available science in earthquake hazards and incorporate new findings on earthquake ground shaking, faults, seismicity, and geodesy. The USGS National Seismic Hazard Mapping Project developed these maps by incorporating information on potential earthquakes and associated ground shaking obtained from interaction in science and engineering workshops involving hundreds of participants,...
Types: Citation;
Tags: B/C site class boundary,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
OpenSHA is an effort to develop object-oriented, web- & GUI-enabled, open-source, and freely available code for conducting Seismic Hazard Analyses (SHA). Our goal is to provide a framework where any arbitrarily complex (e.g., physics based) earthquake-rupture forecast, ground-motion, or engineering-response model can “plug in” for analysis without having to change what’s being plugged into.
The ANSS Comprehensive Catalog (ComCat) contains earthquake source parameters and other products produced by contributing seismic networks. Important digital catalogs of earthquake source parameters (e.g. Centennial Catalog, Global Centroid Moment Tensor Catalog) are loaded into ComCat. New and updated data are added to the catalog dynamically as sources publish or update products. Access to the ComCat is via the online search page, on which a user can select a wide variety of criteria to locate earthquake events of interest. Source Parameters: -amplitude - hypocenter - magnitude - phase data - finite fault - focal mechanism - moment tensor - tectonic summary - regional information Products: - Did You Feel It? -...
Types: Citation;
Tags: ANSS,
Advanced National Seismic System,
ComCat,
Comprehensive Earthquake Catalog,
DYFI,
The Quaternary Fault and Fold Database contains the results of thousands of scientific assessments of faults and associated folds in the United States that demonstrate geologic evidence for coseismic surface deformation in the Quaternary (the past 1,600,000 years). The Quaternary Fault and Fold Database includes information on the age of the most recent coseismic surface deformation, relative rates of activity, fault geometry, sense of movement, and citations of pertinent literature. Much of the information in the database is based on paleoseismology, which is the geologic study of prehistoric earthquakes. Paleoseismology combines well-established geologic practices such as trenching with archeological-style analysis...
The dataset for this investigation consists of microtremor array data collected at 11 sites in the Seattle basin, Washington State. Ten of the arrays consisted of seven Nanometrics Trillium Compact broadband sensors deployed in asymmetric nested triangles (sites ST01, BA02, SP04, LF05, UW06, SN07, RD08, EL09, CH10, and KG11) that recorded for up to six hours. The eleventh array, at site NW03, was supplemented with a smaller triangular array that recorded for about 1 hour before redeployment to a larger array. The inter-sensor distances varied from about 173 m to 2000 m. The data were recorded on Reftek RT-130 data loggers and converted to SAC binary format for archival. All three components were recorded from each...
The datasets for this investigation consist of microtremor array data collected at sites in San Jose, California, Pleasanton, California, and synthetic microtremor array data created as part of a blind shear-wave velocity modeling study as part of the Third International Symposium on the Effects of Surface Geology on Seismic Motion (ESG2006), Grenoble, France, 30 August - 1 September 2006. The data from site STGA in San Jose, consisting of seven sensors used in the paper, are available from the Incorporated Research Institutions for Seismology (IRIS) through a request form at http://ds.iris.edu/ds/nodes/dmc/forms/assembled-data/?dataset_report_number=04-016. An associated report for these data available at http://ds.iris.edu/data/reports/2004/04-016/04-016.pdf....
The 2008 U.S. Geological Survey (USGS) National Seismic Hazard Maps display earthquake ground motions for various probability levels across the United States and are applied in seismic provisions of building codes, insurance rate structures, risk assessments, and other public policy. This update of the maps incorporates new findings on earthquake ground shaking, faults, seismicity, and geodesy. The resulting maps are derived from seismic hazard curves calculated on a grid of sites across the United States that describe the frequency of exceeding a set of ground motions. The USGS National Seismic Hazard Mapping Project developed these maps by incorporating information on potential earthquakes and associated ground...
Types: Citation;
Tags: B/C site class boundary,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
Hourly global Dst index and component disturbance time series from 1958-2007, estimated using the technique documented by Love & Gannon (2009).
|
|
