Skip to main content
Advanced Search

Filters: Tags: USGS (X) > partyWithName: U.S. Geological Survey (X) > partyWithName: GHSC Data Steward (X)

62 results (64ms)   

Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
The 2002 U.S. Geological Survey (USGS) National Seismic Hazard Maps display earthquake ground motions for various probability levels across the United States and are applied in seismic provisions of building codes, insurance rate structures, risk assessments, and other public policy. This update of the maps incorporates new findings on earthquake ground shaking, faults, seismicity, and geodesy. The resulting maps are derived from seismic hazard curves calculated on a grid of sites across the United States that describe the frequency of exceeding a set of ground motions.
thumbnail
Wildfire can significantly alter the hydrologic response of a watershed to the extent that even modest rainstorms can produce dangerous flash floods and debris flows. The USGS conducts post-fire debris-flow hazard assessments for select fires in the Western U.S. We use geospatial data related to basin morphometry, burn severity, soil properties, and rainfall characteristics to estimate the probability and volume of debris flows that may occur in response to a design storm.
thumbnail
This dataset represents 25 parallel longitudinal profiles that were extracted from terrestrial lidar point clouds taken during six survey periods. The six lidar surveys were conducted between 7 October 2010 and 8 October 2013. Over that time a colluvial hollow eroded into a fluvial channel. The longitudinal profiles show the topography of the colluvial hollow for each survey period. The width of the original colluvial hollow was approximately 1.25 m, and a longitudinal profile was extracted every 5 cm for the entire length of the hollow, resulting in 25 parallel longitudinal profiles. These data can be used to observe the transition of the colluvial hollow to a fluvial channel and furthermore they show the development...
thumbnail
ShakeMap is a product of the USGS Earthquake Hazards Program in conjunction with the regional seismic networks. ShakeMaps provide near-real-time maps of ground motion and shaking intensity following significant earthquakes. These maps are used by federal, state, and local organizations, both public and private, for post-earthquake response and recovery, public and scientific information, as well as for preparedness exercises and disaster planning.
thumbnail
The database contains uniformly processed ground motion intensity measurements (peak horizontal ground motions and 5-percent-damped pseudospectral accelerations for oscillator periods 0.1–10 s). The earthquake event set includes more than 3,800 M≥3 earthquakes in Oklahoma and Kansas from January 2009 to December 2016. Ground motion time series were collected out to 500 km. We also relocated the majority of the earthquake hypocenters using a multiple-event relocation algorithm to produce a set of near-uniformly processed hypocentral locations. Details about data processing are reported in the accompanying article. First posted - October 11, 2017 Revised - December 18, 2017, ver. 1.1
thumbnail
A scenario represents one realization of a potential future earthquake by assuming a particular magnitude, location, and fault-rupture geometry and estimating shaking using a variety of strategies. In planning and coordinating emergency response, utilities, local government, and other organizations are best served by conducting training exercises based on realistic earthquake situations—ones similar to those they are most likely to face. ShakeMap Scenario earthquakes can fill this role. They can also be used to examine exposure of structures, lifelines, utilities, and transportation corridors to specified potential earthquakes. A ShakeMap earthquake scenario is a predictive ShakeMap with an assumed magnitude and...
thumbnail
The West Hills of Portland, in the southern Tualatin Mountains, trend northwest along the west side of Portland, Oregon. These silt-mantled mountains receive significant wet-season precipitation and are prone to sliding during wet conditions, occasionally resulting in significant property damage or casualties. In an effort to develop a baseline for interpretive analysis of the groundwater response to rainfall, an automated monitoring system was installed in 2006 to measure rainfall, pore-water pressure, soil suction, soil-water potential, and volumetric water content at 15-minute intervals. The data show a cyclical pattern of groundwater and moisture content levels—wet from October to May and dry between June and...
thumbnail
The NEIC global earthquake bulletin is called the Preliminary Determination of Epicenters or PDE, and is one of many discrete products in the ANSS Comprehensive Catalog (ComCat). We use the word "Preliminary" for our final bulletin because the Bulletin of the International Seismological Centre is considered to be the final global archive of parametric earthquake data, in other words phase arrival (“pick”) times and amplitudes.
thumbnail
Landslides are damaging and deadly, and they occur in every U.S. state. However, our current ability to understand landslide hazards at the national scale is limited, in part because spatial data on landslide occurrence across the U.S. varies greatly in quality, accessibility, and extent. Landslide inventories are typically collected and maintained by different agencies and institutions, usually within specific jurisdictional boundaries, and often with varied objectives and information attributes or even in disparate formats. The purpose of this data release is to provide an openly accessible, centralized map of existing information on landslide occurrence across the entire U.S. The data release includes digital...
thumbnail
A hydrologic monitoring network was installed to investigate landslide hazards affecting the railway corridor along the eastern shore of Puget Sound between Seattle and Everett, near Mukilteo, Washington. During the summer of 2015, the U.S. Geological Survey installed instrumentation at four sites to measure rainfall and air temperature every 15 minutes. Two of the four sites are installed on contrasting coastal bluffs, one landslide scarred and one vegetated. At these two sites, in addition to rainfall and air temperature, volumetric water content, pore pressure, soil suction, soil temperature (via hydrologic instrumentation), and barometric pressure were measured every 15 minutes. The instrumentation was designed...
thumbnail
This data release includes time-series data from a monitoring site located in a small drainage basin in the Arroyo Seco watershed in Los Angeles County, CA, USA (N3788964 E389956, UTM Zone 11, NAD83). The site was established after the 2009 Station Fire and recorded a series debris flows in the first winter after the fire. The data include three types of time-series: (1) 1-minute time series of rainfall, soil water content, channel bed pore pressure and temperature, and flow stage recorded by radar and laser distance meters (ArroyoSecoContinuous.csv); (2) 10-Hz time series of flow stage recorded by the laser distance meter during rain storms (ArroyoSecoStormLaser.csv), and (3) 2-second time series of rainfall and...
thumbnail
Compiled Vs30 measurements obtained by studies funded by the U.S. Geological Survey (USGS) and other governmental agencies. Thus far, there are 2,997 sites in the United States, along with metadata for each measurement from government-sponsored reports, Web sites, and scientific and engineering journals. Most of the data originated from publications directly reporting the work of field investigators. A small subset (less than 20 percent) of Vs30 values was previously compiled by the USGS and other research institutions. Whenever possible, Vs30 originating from these earlier compilations were crosschecked against published reports. Both downhole and surface-based Vs30 estimates are represented. Most of the VS30 data...
thumbnail
This is a catalog of precise relocations of earthquakes surrounding the 2022 Hunga Tonga-Hunga Ha-apai Volcanic Eruption. These were generated using using surface-wave double-difference measurements, and relative magnitudes were computed between events. For details of the methodology used to produce this catalog, and the interpretation of these data, see the Seismological Research Letter publication "High-Precision Characterization of Seismicity from the 2022 Hunga Tonga-Hunga Ha-apai Volcanic Eruption". Locations use the WGS 1984 Datum. One comma-separated table is provided in this data release, relocations.csv, which is a summary of the relocation magnitude analysis. It includes 18 columns: Column 1 (time):...
thumbnail
This dataset presents where, why, and how much probabilistic ground motions have changed with the 2018 update of the National Seismic Hazard Model (NSHM) for the conterminous U.S. (CONUS) vs. the 2014 NSHM. In the central and eastern U.S., hazard changes are the result of updated ground motion models (further broken down by median and epistemic uncertainty, aleatory variability, and site effects models) and gridded seismicity models. In the western U.S., hazard changes are the result of updated ground motion models in four urban areas with deep sedimentary basins and gridded seismicity models. Probabilistic ground motion changes (2% in 50 years probability of exceedance for a firm rock site, VS30 = 760 m/s, NEHRP...
thumbnail
Magnetotelluric (MT) method is a branch of geophysics that employs very large-scale natural sources from the solar wind and lightning. Modern-day MT uses state-of-the-art instrumentation, data processing and analysis tools to provide valuable information about deep Earth structure, complimentary to that of seismic data. These days, MT data also serve as a primary resource for estimation of geomagnetically induced currents, hazardous to modern infrastructure. However, there is a real need to modernize deeply historic MT data formats to a common standard that is fully documented, platform-independent, extensible, and accessible to the broader community of geoscientists. In the past decade, we have led just such an...
thumbnail
The data for this release is an ASCII file containing grid points of Cascadia P- and S-wave velocity models. The model volume was developed to include the Cascadia subduction zone for purposes of ground motion simulation. The description of the model and background of its development is provided in the associated Open-File Report. The grid points are given in Universal Transverse Mercator (UTM) Zone 10 North coordinates for East and North locations, and the grid point depths are given in meters below mean sea level. Grid point spacing is 500 meters in each ordinal direction. The model region extends approximately from 40.2°N to 50°N latitude, and approximately from 122°W to 129°W longitude. The maximum depth of...
thumbnail
The U.S. Geological Survey’s National Seismic Hazard Map Program publishes a number of products and tools designed to provide details of earthquake shaking hazards and help engineers meet modern seismic design provisions for the construction of buildings, bridges, highways, and utilities that are better able to withstand earthquakes, not only saving lives but also enabling critical activities to continue with less disruption.
thumbnail
This data release includes geodetic time series from high-rate GPS instruments recording 4 earthquakes co-seismically in the near-field – the 2010 Maule, Chile earthquake; the 2012 Nicoya, Costa Rica earthquake; the 2014 Iquique, Chile earthquake; and the 2015 Gorkha, Nepal earthquake. For each earthquake, data (sac files, 1 Hz sampling, ~2-3 minutes around the earthquake origin time) are included in a separate folder. Each sac file provides a time series of ground displacement from the earthquake as recorded at that station. The location of each station is listed in the relevant earthquake file in the “_station_info” folder.
thumbnail
We present high-resolution (10-cm pixel) digital surface models (DSMs) generated for the northern 16 km of the surface rupture associated with the 1983 Mw 6.9 Borah Peak earthquake. These DSMs were generated using Agisoft Photoscan (and Metashape) image-based modeling software and low-altitude aerial photographs acquired from unmanned aircraft systems and a tethered balloon. DSM files consist of GeoTIFFs with georeferencing information stored in the file headers.
map background search result map search result map A database of instrumentally recorded ground motion intensity measurements from induced earthquakes in Oklahoma and Kansas Results of Hydrologic Monitoring of a Landslide-Prone Hillslope in Portland's West Hills, Oregon, 2006-2017 Results of Hydrologic Monitoring on Landslide-prone Coastal Bluffs near Mukilteo, Washington Post-wildfire debris-flow monitoring data, Arroyo Seco, 2009 Station Fire, Los Angeles County, California, November 2009 to March 2010. Fourmile Canyon Wildfire Longitudinal Profile Data Data for P- and S-wave Seismic Velocity Models Incorporating the Cascadia Subduction Zone for 3D Earthquake Ground Motion simulations- Update for Open-File Report 2007-1348 Landslide Inventories across the United States Digital Surface Models for the northern 16 km of the 1983 Borah Peak earthquake rupture, northern Lost River fault zone (Idaho, USA) Data Release for the 2018 Update of the U.S. National Seismic Hazard Model: Where, Why, and How Much Probabilistic Ground Motion Maps Changed High-Precision Seismicity Catalog for the 2022 Hunga Tonga-Hunga Ha-apai Volcanic Eruption Fourmile Canyon Wildfire Longitudinal Profile Data Results of Hydrologic Monitoring on Landslide-prone Coastal Bluffs near Mukilteo, Washington Digital Surface Models for the northern 16 km of the 1983 Borah Peak earthquake rupture, northern Lost River fault zone (Idaho, USA) Results of Hydrologic Monitoring of a Landslide-Prone Hillslope in Portland's West Hills, Oregon, 2006-2017 A database of instrumentally recorded ground motion intensity measurements from induced earthquakes in Oklahoma and Kansas High-Precision Seismicity Catalog for the 2022 Hunga Tonga-Hunga Ha-apai Volcanic Eruption Data for P- and S-wave Seismic Velocity Models Incorporating the Cascadia Subduction Zone for 3D Earthquake Ground Motion simulations- Update for Open-File Report 2007-1348 Data Release for the 2018 Update of the U.S. National Seismic Hazard Model: Where, Why, and How Much Probabilistic Ground Motion Maps Changed Landslide Inventories across the United States