Skip to main content
Advanced Search

Filters: Tags: Velocity (X)

69 results (153ms)   

Filters
Date Range
Extensions (Less)
Types (Less)
Contacts (Less)
Categories (Less)
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
Data collected during the May 14th 2015 ADCP survey were processed using a Geographic Information System for interpolation and display. The shapefile available for download depicts ADCP data points collected on May 14, 2015. Parameters include depth, velocity, and discharge collected at 1 second intervals. Flood data points were collected during incoming tide.
thumbnail
Water velocities were measured at discrete cross-sections along an approximately 1-mile reach of the Kentucky Dam tailwater on September 12 and 17-18, 2020, using a 1200 kHz acoustic Doppler current profiler (ADCP). The data were geo-referenced with an integrated global navigation satellite system (GNSS) smart antenna with submeter accuracy. The ADCP and GNSS antenna were mounted on a marine survey vessel, and data were collected as the survey vessel traversed the tailwater along planned survey lines. There was typically one reciprocal pair (two passes) of data collected per line. There was a total of 53 survey lines equally spaced 100 feet apart and oriented approximately perpendicular to the primary flow direction....
thumbnail
This dataset contains survey data including wading and real-time kinematic (RTK) Global Positioning System (GPS) of water surface elevation and channel bed topography at cross section 5 (xs5) on March 20, 2018, which is adjacent to the U.S. Geological Survey (USGS) streamgage at Arkansas River at Parkdale, Colorado (USGS 07094500). The RTK Global Navigation Satellite System (GNSS) surveys were performed using a local base station associated with the streamgage and Trimble R8 and R10 receivers while wading the channel at cross section 5. The survey data were postprocessed by performing the National Oceanic and Atmospheric Administration Online Positioning User Service (OPUS) correction of the static observations...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Trimble AG132 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column, temporally averaged over 5-second intervals to reduce noise, and exported as a .csv file using the Velocity Mapping Toolbox (Parsons and others, 2013). These data were collected in support of the US Army Corps of Engineers Great Lakes and Mississippi River Interbasin Study (GLMRIS), and were concurrent with a dye-tracing study. NOTE: Any data assigned...
thumbnail
These data were collected using a 600 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 50 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected during dye tracing surveys of the right bank of the Chicago Sanitary and Ship Canal and include low-velocity regions of the canal such as barge slips in addition to the main channel. Data were processed using the Velocity Mapping Toolbox (Parsons and...
thumbnail
Acoustic Doppler current profiler (ADCP) data were collected along a prescribed navigated course throughout Calumet Harbor on September 14, 2015 to determine the spatial distribution of layer-averaged velocities. The data were layer-averaged in 2-foot increments of depth from the bed to the water surface, and temporally-averaged over a 30-second window to reduce noise. Data were processed using the Velocity Mapping Toolbox (Parsons and other, 2013). Any data assigned a value of "-9999" are invalid or missing and should not be used for analysis. Parsons, D. R., Jackson, P. R., Czuba, J. A., Engel, F. L., Rhoads, B. L., Oberg, K. A., Best, J. L., Mueller, D. S., Johnson, K. K. and Riley, J. D. (2013), Velocity Mapping...
thumbnail
Continuous measurements of nearshore currents in Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, were recorded during the summer of 2019. Currents were measured every 15 minutes with a 5-minute averaging interval using two different acoustic Doppler velocity meters (ADVM). The first instrument (ADVM 1) was a SonTek 500 kHz Argonaut-SL ADVM mounted to the northwest side of the southwest caisson near the entrance of Wildwood Marina about 8 feet above the bed (approximately mid-depth at the time of installation) at a true heading of 307 degrees. ADVM 1 was configured with a 6.6-ft blanking distance, ten 33-ft measurement cells, and a total profiling distance of 335 feet from the face...
thumbnail
The dataset consists of a .csv and shapefile of measurements of surface velocity magnitude and direction at the Colorado River at Windy Gap near Granby, CO, on June 13, 2022. The dataset contains approximately 2 km of river length. The surface velocity measurements were made by applying Large-Scale Particle Image Velocimetry (LSPIV) techniques, using overlapping videos collected by small Unmanned Aircraft Systems (sUAS). Additional attributes, including divergence, curl, shear, and strain, were calculated from the surface velocity measurements and are included in the dataset. This data is ideal for instantaneous discharge, shear, strain, and divergence, but less so for eddies and mean reach values. This is because...


map background search result map search result map Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (November 16, 2011) Spatial distribution of depth-averaged velocity measured in the Des Plaines River, Illinois (October 21, 2015) Spatial distribution of layer-averaged velocity measured along a prescribed path in the Calumet Harbor, Illinois (September 14, 2015) ADCP Shapefile - Flood Wading survey of bed topography, gage height, and cross-sectional area for the Arkansas River near Parkdale, Colorado Water-quality measurements (at depths) collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Velocity mapping in the tailwater of Kentucky Dam (Tennessee River) near Gilbertsville, Kentucky, September 12 and 17–18, 2020 Continuous water velocity data of currents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, summer 2019 Colorado River at Windy Gap near Granby, CO - 2022/06/13 Water Surface Velocity Map Using Particle Image Velocimetry Continuous water velocity data of currents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, summer 2019 ADCP Shapefile - Flood Wading survey of bed topography, gage height, and cross-sectional area for the Arkansas River near Parkdale, Colorado Colorado River at Windy Gap near Granby, CO - 2022/06/13 Water Surface Velocity Map Using Particle Image Velocimetry Velocity mapping in the tailwater of Kentucky Dam (Tennessee River) near Gilbertsville, Kentucky, September 12 and 17–18, 2020 Spatial distribution of depth-averaged velocity measured in the Des Plaines River, Illinois (October 21, 2015) Spatial distribution of layer-averaged velocity measured along a prescribed path in the Calumet Harbor, Illinois (September 14, 2015) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (November 16, 2011) Water-quality measurements (at depths) collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1)