Skip to main content
Advanced Search

Filters: Tags: Velocity (X) > Categories: Data (X)

31 results (99ms)   

View Results as: JSON ATOM CSV
thumbnail
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected by the U.S. Geological Survey (USGS) concurrently with environmental DNA (eDNA) sampling in this reach of the Chicago Sanitary and Ship Canal (CSSC) by the U.S. Fish and Wildlife Service (USFWS). Data were processed using the Velocity Mapping Toolbox...
thumbnail
These data were collected using a 1200 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 25 centimeter bins from a moving boat. The data were georeferenced with a Hemisphere Crescent A100 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been layer-averaged over the lower portion of the water column (0 to 4 meters above the bed). These data were collected by the U.S. Geological Survey (USGS) concurrently with environmental DNA (eDNA) sampling in this reach of the Chicago Sanitary and Ship Canal by the U.S. Fish and Wildlife Service (USFWS). Data were processed using the Velocity Mapping Toolbox (Parsons and others, 2013). NOTE: Any data assigned...
thumbnail
Water velocities and water-quality constituents were measured along planned survey lines, which were generally perpendicular to the shoreline and spaced 100 meters apart, over an approximately 2.3-mile section of nearshore Lake Erie on June 10-12, 2019 (survey 1), and August 19-21, 2019 (survey 2), using a 1200 kHz acoustic Doppler current profiler (ADCP), a YSI 6920 V2 multiparameter sonde, and a YSI EcoMapper autonomous underwater vehicle (AUV). Water-quality data collected in this area included near-surface and three-dimensional measurements of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin (blue-green algae). The data were geo-referenced with an integrated...
thumbnail
These data were collected using a 600 kHz Rio Grande ADCP (acoustic Doppler current profiler) in mode 12 from a moving boat. The data were georeferenced with a Hemisphere A101 Smart Antenna differential GPS. These data were processed with Teledyne RD Instruments' software, WinRiver II. These data were collected concurrently with several water quality parameters that were collected by an autonomous underwater vehicle (AUV) in the same reach. This data release supports the following publication: VonIns, B.L., and Jackson, P.R., 2017, Response of currents and water quality to changes in dam operations in Hoover Reservoir, Columbus, Ohio, August 24–28, 2015: U.S. Geological Survey Scientific Investigations Report 2017–5027,...
thumbnail
This dataset contains data collected during science flights using the drone-based QCam, which is a Doppler (velocity) radar designed to measure surface velocity and compute river discharge when channel bathymetry is known. Five science flights were conducted on four rivers including the Arkansas and South Platte Rivers in Colorado and the Salcha and Tanana Rivers in Alaska. Data are presented in a comma separated values (CSV) file.
thumbnail
Introduction In 2012, Hurricane Sandy created an open breach in the barrier island system along the south shore of Long Island, N.Y. This breach formed at a location known as Old Inlet and migrated rapidly westward over the winter storm season following Hurricane Sandy. In response, the National Park Service sought assistance from the USGS New York Water Science Center to help evaluate the hydrodynamics and geomorphology of the breach. The evaluation is centered on measurement of water velocities and depths within the breach, and collection of water levels with the Great South Bay adjacent to the breach. This project is part of a larger ongoing study prepared in coordination with the National Park Service...
thumbnail
The Bathymetry surface was created by plotting depths of all data points collected relative to North American Vertical Datum of 1988 (NAVD 88), which was converted using the Vertical Datum Transformation tool created by the National Oceanic and Atmospheric Administration's (NOAA) National Geodetic Survey, Office of Coast Survey, and Center for Operation Oceanographic Products and Services. The elevation of the bathymetric raster surface was interpolated between these points in a GIS using a spline interpolator. A total of 432 points were used for interpolation. The points were used as the input to create a polygon feature class. The Spline tool was applied using the points and polygon to interpolate the bathymetric...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
These data are bathymetry (river bottom elevation) in XYZ format (Easting, Northing, Elevation), generated from the September 17–18, 2020, survey of the Kentucky Dam tailwater from just downstream from Kentucky Dam to approximately 1,500 feet upstream from the I-24 bridge (about 1 mile total length). Bathymetric data were collected using an acoustic Doppler current profiler (ADCP) with an integrated global navigation satellite system (GNSS) smart antenna. The ADCP and GNSS antenna were mounted on a marine survey vessel, and data were collected as the survey vessel traversed the tailwater along planned survey lines. There was typically one reciprocal pair (two passes) of data collected per line. There was a total...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
This U.S. Geological Survey (USGS) Data Release provides velocity test data for assessing the effect of salinity tolerance on cyanobacteria associated with a harmful algal bloom in Lake Okeechobee, Florida, July 10 to 13, 2017. All data are reported as raw measured values and are not rounded to USGS significant figures. Water and algal bloom material were collected from Lake Okeechobee, Florida on July 7, 2017. This dataset includes continuous water-quality measurements take in the laboratory July 10 to July 13, 2017 measuring water temperature, specific conductance, salinity, pH, turbidity, dissolved oxygen, chlorophyll, and phycocyanin at five-minute intervals at velocities of 0.946, 0.271, and 0 feet per second...
thumbnail
These data are depth-averaged velocities measured by an acoustic Doppler current profiler (ADCP), as well as continuous depth-averaged velocities from a stationary location measured with an acoustic Doppler velocity meter (ADVM). These data were collected from the July 12-14, 2022, survey of the Ashtabula River near Ashtabula, Ohio. The location of the ADCP data are from approximately 1,500 feet upstream from the Bridge Street bridge to 3,000 feet upstream from the Bridge Street bridge. The ADVM data are from approximately 41° 53' 46.4"N, 80° 47' 39.5"W. ADCP data were collected using an integrated global navigation satellite system (GNSS) smart antenna with submeter accuracy. The ADCP and GNSS antenna were mounted...
thumbnail
These data were collected using a 600 kHz TRDI Rio Grande acoustic Doppler current profiler (ADCP) in mode 12 with 50 centimeter bins from a moving boat. The data were georeferenced with a Trimble Ag132 differential Global Positioning System (GPS) receiver with submeter accuracy. The data have been depth-averaged over the entire measured portion of the water column and temporally averaged over 5-second intervals to reduce noise. These data were collected during water-quality surveys of the right bank of the Chicago Sanitary and Ship Canal (CSSC) and include low-velocity regions of the canal such as barge slips in addition to the main channel. Data were processed using the Velocity Mapping Toolbox (Parsons and others,...
thumbnail
ADCP data were collected on July 31-August 1, 2013 in the Dresden Island Pool on the Des Plaines River using a Teledyne Rio Grande 1200 kHz Acoustic Doppler Current Profiler with integrated Trimble Ag162 GPS. On July 31-August 1, 2013 the Des Plaines River discharge also was approximately 2,000-3,000 cfs. ADCP data was collected in reciprocal pairs along cross-sections and along roughly streamwise oriented lines between cross-sections. The data are provided in: (1) a zipped folder containing classic ascii output files exported from WinRiverII software, and a README text file indicating which files are reciprocal pairs, and which files are streamwise oriented lines (2) a zipped folder containing KML files for each...
thumbnail
The Bathymetry surface was created by plotting depths of all data points collected relative to North American Vertical Datum of 1988 (NAVD 88), which was converted using the Vertical Datum Transformation tool created by the National Oceanic and Atmospheric Administration's (NOAA) National Geodetic Survey, Office of Coast Survey, and Center for Operation Oceanographic Products and Services. The elevation of the bathymetric raster surface was interpolated between these points in a GIS using a spline interpolator. A total of 432 points were used for interpolation. The points were used as the input to create a polygon feature class. The Spline tool was applied using the points and polygon to interpolate the bathymetric...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
The following spreadsheets contain discharge measurements that were used to develop rating curves for each stream gage. The numbers on each tab refer to the date the measurement was collected. Each spreadsheet contains distance, depth, and velocity measurements used to calculate discharge in centimeters and highlighted in yellow.
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...
thumbnail
Velocity and water-quality surveys were completed along an approximately 71-mile reach of the Ohio River between Markland Locks and Dam (river mile 531.5) and McAlpine Locks and Dam (river mile 606.8) on October 27–November 4, 2016 (survey #1), and June 26–29, 2017 (survey #2). Water-quality data collected in this reach included surface measurements and vertical profiles of water temperature, specific conductance, pH, dissolved oxygen, turbidity, chlorophyll, and phycocyanin. Streamflow and velocity data were collected simultaneous to the water-quality data at cross-sections and along longitudinal lines (corresponding to the water-quality surface measurements) and at selected stationary locations (corresponding...


map background search result map search result map Velocity Mapping in the Dresden Pool of the Des Plaines River with ADCP Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (March 2-3, 2010) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (December 7, 2010) Spatial distribution of layer-averaged velocity (0-4 m above the bed) measured in the ACL slip on the Chicago Sanitary and Ship Canal near Lemont, IL (December 7, 2010) Survey of velocity and bathymetry in Hoover Reservoir, ADCP source data, Columbus, OH (August, 2015) Bathymetric and Tidal Discharge data for Wilderness Breach, Fire Island National Seashore, Long Island, NY, May 14, 2015 Bathymetry Raster Surface Bathymetry Contours Velocity test data for assessing the effect of salinity tolerance on cyanobacteria associated with a harmful algal bloom in Lake Okeechobee, Florida, July 10 to 13, 2017 Velocity measurements collected along cross-section lines (transects) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Velocity measurements collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Velocity measurements collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Water-quality measurements (near surface) collected along cross-section and longitudinal lines in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Water-quality measurements (at depths) collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Water-quality measurements (near surface) collected along cross-section and longitudinal lines in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Surface velocity data acquired from QCam (drone-based Doppler velocity radar) for the Arkansas and South Platte Rivers in Colorado and the Salcha and Tanana Rivers in Alaska Velocity surveys and three-dimensional point measurements of basic water-quality constituents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, June 10–12, 2019, and August 19–21, 2019 Bathymetry in the tailwater of Kentucky Dam (Tennessee River) near Gilbertsville, Kentucky, September 17–18, 2020 Measurements of velocity and bathymetry in the Ashtabula River near Ashtabula, Ohio, July 12–14, 2022 Measurements of velocity and bathymetry in the Ashtabula River near Ashtabula, Ohio, July 12–14, 2022 Bathymetry Contours Bathymetric and Tidal Discharge data for Wilderness Breach, Fire Island National Seashore, Long Island, NY, May 14, 2015 Bathymetry Raster Surface Bathymetry in the tailwater of Kentucky Dam (Tennessee River) near Gilbertsville, Kentucky, September 17–18, 2020 Survey of velocity and bathymetry in Hoover Reservoir, ADCP source data, Columbus, OH (August, 2015) Velocity surveys and three-dimensional point measurements of basic water-quality constituents in nearshore Lake Erie in the vicinity of Villa Angela Beach and Euclid Creek, Cleveland, Ohio, June 10–12, 2019, and August 19–21, 2019 Velocity Mapping in the Dresden Pool of the Des Plaines River with ADCP Spatial distribution of layer-averaged velocity (0-4 m above the bed) measured in the ACL slip on the Chicago Sanitary and Ship Canal near Lemont, IL (December 7, 2010) Spatial distribution of depth-averaged velocity measured in the Chicago Sanitary and Ship Canal, Chicago, IL (December 7, 2010) Velocity measurements collected along cross-section lines (transects) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Velocity measurements collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Velocity measurements collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Water-quality measurements (near surface) collected along cross-section and longitudinal lines in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Water-quality measurements (at depths) collected at stationary locations (verticals) in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, June 26–29, 2017 (survey #2) Water-quality measurements (near surface) collected along cross-section and longitudinal lines in the Ohio River between Markland Locks and Dam and McAlpine Locks and Dam, Kentucky and Indiana, October 27–November 4, 2016 (survey #1) Velocity test data for assessing the effect of salinity tolerance on cyanobacteria associated with a harmful algal bloom in Lake Okeechobee, Florida, July 10 to 13, 2017 Surface velocity data acquired from QCam (drone-based Doppler velocity radar) for the Arkansas and South Platte Rivers in Colorado and the Salcha and Tanana Rivers in Alaska