Filters: Tags: hydraulic engineering (X)
35 results (72ms)|
Filters
Date Range
Types Contacts
Categories Tag Types Tag Schemes |
This data was collected over the course of two years, from 2016 to 2017, within the flume facility laboratory. The research project that was conducted evaluated different fishway entrance designs and their effect on the passage of adult American shad. The data consists of 15 columns and 1925 rows. Each row entry pertains to the performance of a single fish during one of 64 trials over the two year period. Columns give information on the treatment condition (e.g. entrance gate designs, headwater/tailwater elevations), water quality (e.g., water temperature, turbidity), fish specific information (e.g. sex, fork length, handling), passage time, and the censor value used in the statistical analysis.
Categories: Data;
Tags: Ecology,
Franklin County,
Turners Falls,
USGS Science Data Catalog (SDC),
Water Resources,
The development and the generation of the dataset that is published through this data release, is based on the results and findings of the report mentioned here: Prokopec, J.G., 2018, Hydraulic modeling and flood-inundation mapping for the Huron River and Ore Lake Tributary, Livingston County, Michigan: U.S. Geological Survey Scientific Investigations Report 2018-5048, https://doi.org/10.3133/sir20185048. The geospatial dataset contains final versions of the raster and vector geospatial data and its related metadata that are discussed in the report.
In support of a preliminary analysis performed by New York State Department of Environmental Conservation (NYSDEC) that found elevated nutrient levels along selected reaches of the Mohawk River, one-dimensional, unsteady, hydraulic and water-quality models using HEC-RAS and HEC-RAS Nutrient Simulation Module I (version 5.0.3) were developed by the U.S. Geological Survey (USGS) for the 127-mile reach of the Mohawk River between Rome and Cohoes, New York. The models were designed to accurately simulate within-channel flow conditions for this highly regulated, control structure dense river reach. The models were calibrated for the study period of May through September 2016 using best available streamflow, temperature,...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Amsterdam,
Aquatic Biology,
Cohoes,
Environmental Health,
HEC-RAS,
Digital flood-inundation maps were created by the U.S. Geological Survey (USGS) in cooperation with the Bandera County River Authority and Groundwater District and with the Texas Water Development Board for a 23-mile reach of the Medina River extending from Winans Creek to English Crossing, Texas. The flood-inundation maps represent a range of selected water-surface elevations at USGS streamflow-gaging station 08178880 Medina River at Bandera, Texas (hereinafter referred to as the “Bandera station”). Near-real time hydrologic data for estimating areas of inundation near the Bandera station are available from the USGS National Water Information System (NWIS) web interface (https://waterdata.usgs.gov/tx/nwis/) and...
Kootenai river hydraulic conditions were simulated using the iRIC FaSTMECH two-dimensional hydraulic flow model (Nelson, 2003). In addition to this study, FaSTMECH 2D flow models have been developed for numerous Kootenai River studies dating back to 2005. The methods used to develop, calibrate, and simulate FaSTMECH 2D flow models are described at length in multiple previous studies (Fosness and Dudunake, in press; Barton and others, 2005; Barton and others, 2007; Logan and others, 2011; McDonald and others, 2016; McDonald and Nelson, 2018; McDonald and Nelson, 2020). Model simulations were combined with white sturgeon telemetry data to explain fish positions with respect to selected depths and depth-averaged velocity.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Aquatic Biology,
Bonners Ferry,
Boundary,
Ecology,
Idaho,
Digital flood-inundation maps were created by the U.S. Geological Survey (USGS) in cooperation with the Bandera County River Authority and Groundwater District and with the Texas Water Development Board for a 23-mile reach of the Medina River extending from Winans Creek to English Crossing, Texas. The flood-inundation maps represent a range of selected water-surface elevations at USGS streamflow-gaging station 08178880 Medina River at Bandera, Texas (hereinafter referred to as the “Bandera station”). In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model HEC-RAS (Hydrologic Engineering Center River Analysis System) (Davidian, 1984; U.S. Army Corps of Engineers,...
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. The model archive contains two model runs, the calibration model run and the flood inundation model run. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan,...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado (CO),
Fort Morgan,
GIS,
Morgan County,
South Platte River,
To provide daily mean streamflow values at ungaged (partial-record) sites within the Yankee Fork Salmon River watershed, the U.S. Geological Survey (USGS), in cooperation with U.S. Bureau of Reclamation, used discharge measurements at three partial-record sites and related those measurements to a nearby USGS real-time streamgage (index site). Daily mean streamflow was estimated by developing a regression relationship between each partial-record site and the index site for water years 2012-2019. These data are intended to provide daily mean streamflow estimates at partial-record sites as part of a larger study (Clark and others, 2021) to estimate sediment loading for each site.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Custer,
Hydrology,
Idaho,
Land,
North America,
Digital flood-inundation maps for a 6.6-mile reach of the St. Joseph River at Elkhart, Indiana were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather...
Categories: Data;
Tags: City of Elkhart,
Elkhart,
Indiana,
St. Joseph River,
USGS Science Data Catalog (SDC),
Digital grids that represent the depth of flood waters for an 8.8-mile reach of the North Platte River, from 1.5 miles upstream of the Highway 92 bridge to 3 miles downstream of the Highway 71 bridge, were created by the U.S. Geological Survey (USGS) in cooperation with the Cities of Scottsbluff and Gering. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Platte River at Scottsbluff, Nebr. (station 06680500). Near-real-time stages at this streamgage may be obtained on the Internet...
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata, and the model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado,
Fort Morgan,
GIS,
Model Archive,
Morgan County,
Digital flood-inundation maps for a 7.5-mile reach of the White River at Noblesville, Indiana, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the White River at Noblesville, Ind., streamgage (USGS station number 03349000). Real-time stages at this streamgage may be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/nwis or the National Weather Service...
Categories: Data;
Types: Citation;
Tags: City of Noblesville,
Indiana,
Noblesville,
United States,
White River,
Digital flood-inundation maps for a 7.5-mile reach of the White River at Noblesville, Indiana, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the White River at Noblesville, Ind., streamgage (USGS station number 03349000). Real-time stages at this streamgage may be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/nwis or the National Weather Service...
Categories: Data;
Types: Citation;
Tags: City of Noblesville,
Indiana,
Noblesville,
United States,
White River,
This dataset contains U.S. Geological Survey (USGS) developed hydraulic models at nine dam-removal and culvert-retrofit sites in the northeastern United States (Olson and Simeone, 2021). These are one-dimensional and two-dimensional U.S. Army Corps of Engineer (USACE) Hydrologic Engineering Center’s River Analysis System (HEC-RAS) models for both the pre- and post-dam removal and culvert-retrofit conditions. The referenced models were used to evaluate fish passage and flood risk along the simulated reaches in the various states simulated. The HEC-RAS hydraulic models include data for the models and model output files.
Digital flood-inundation maps for an 8-mile (mi) reach of the Huron River from downstream of Rickett Road to Strawberry Lake, Michigan, were created by the U.S. Geological Survey (USGS) in cooperation with Green Oak and Hamburg Townships, and the U.S. Army Corps of Engineers. The flood-inundation maps also include a 1.16-mi reach of the Ore Lake Tributary until it joins the Huron River, approximately 2.22 mi downstream of Rickett Road. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage...
|
|
