Skip to main content
Advanced Search

Filters: Tags: inverse modeling (X) > Extensions: Citation (X)

5 results (49ms)   

View Results as: JSON ATOM CSV
thumbnail
Abstract: We present an inverse modeling approach for reconstructing the effective thermal conductivity of snow on a daily basis using air temperature, ground temperature and snow depth measurements. The method is applied to four sites in Alaska. To validate the method we used measured snow densities and snow water equivalents. The modeled thermal conductivities of snow for the two interior Alaska sites have relatively low values and reach their maximum near the end of the snow season, while the conductivities at the two sites on the Alaskan North Slope are higher and reach their maximum earlier in the snow season. We show that the reconstructed daily thermal conductivities allow for more accurate modeling of ground...
thumbnail
We quantified seed dispersal in a guild of Sonoran Desert winter desert annuals at a protected natural field site in Tucson, Arizona, USA. Seed production was suppressed under shrub canopies, in the open areas between shrubs, or both by applying an herbicide prior to seed set in large, randomly assigned removal plots (10-30 m diameter). Seedlings were censused along transects crossing the reproductive suppression borders shortly after germination. Dispersal kernels were estimated for Pectocarya recurvata and Schismus barbatus from the change in seedling densities with distance from these borders via inverse modeling. Estimated dispersal distances were short, with most seeds traveling less than a meter. The adhesive...
Abstract (from http://www.sciencedirect.com/science/article/pii/S0165232X1400038X#): We present an inverse modeling approach for reconstructing the effective thermal conductivity of snow on a daily basis using air temperature, ground temperature and snow depth measurements. The method is applied to four sites in Alaska. To validate the method we used measured snow densities and snow water equivalents. The modeled thermal conductivities of snow for the two interior Alaska sites have relatively low values and reach their maximum near the end of the snow season, while the conductivities at the two sites on the Alaskan North Slope are higher and reach their maximum earlier in the snow season. We show that the reconstructed...
Inverse modeling studies employing data collected from the classic Henry seawater intrusion problem give insight into several important aspects of inverse modeling of seawater intrusion problems and effective measurement strategies for estimation of parameters for seawater intrusion. Despite the simplicity of the Henry problem, it embodies the behavior of a typical seawater intrusion situation in a single aquifer. Data collected from the numerical problem solution are employed without added noise in order to focus on the aspects of inverse modeling strategies dictated by the physics of variable-density flow and solute transport during seawater intrusion. Covariances of model parameters that can be estimated are...
Electromagnetic induction (EMI) instruments provide rapid, noninvasive, and spatially dense data for characterization of soil and groundwater properties. Data from multi-frequency EMI tools can be inverted to provide quantitative electrical conductivity estimates as a function of depth. In this study, multi-frequency EMI data collected across an abandoned uranium mill site near Naturita, Colorado, USA, are inverted to produce vertical distribution of electrical conductivity (EC) across the site. The relation between measured apparent electrical conductivity (ECa) and hydraulic conductivity (K) is weak (correlation coefficient of 0.20), whereas the correlation between the depth dependent EC obtained from the inversions,...
    map background search result map search result map Seed dispersal of desert annuals. The Effect of Snow: How to Better Model Ground Surface Temperatures Seed dispersal of desert annuals. The Effect of Snow: How to Better Model Ground Surface Temperatures