Filters: Tags: islands (X)
26 results (67ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
This dataset depicts roads built on the Tongass National Forest prior to 1960. This dataset is part of a larger analysis of road building and timber harvest on the Tongass National Forest, compiled for the report Scientific Basis for Roadless Area Conservation (http://www.consbio.org/cbi/projects/show.php?page=roadless/roadless.htm), pp 70-73. Road segments from a US Forest Service roads layer were attributed to the most likely decade in which the road was built, as determined by an analysis of connectivity to clearcuts on the Tongass National Forest from that decade. It was assumed that following 1960, harvests required access to mills or extraction sites, and thus roads connecting to them were most likely built...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The elevation contour data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The contours were created from a surface raster (also referred to as digital elevation model) of the...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The substrate enhancement pilot project (SEPP) extent GIS layer represents an area where an artificial substrate will be placed. The artificial substrate, consisting of a mixed size class of gravel, is aimed at providing a more suitable substrate for sturgeon eggs and early-life rearing habitat. The location of the SEPP extent was created by analyzing the egg-mat network, bathymetric features, surficial sediment facies, and streamflow...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
This dataset depicts roads built on the Tongass National Forest during the 1960s. This dataset is part of a larger analysis of road building and timber harvest on the Tongass National Forest, compiled for the report Scientific Basis for Roadless Area Conservation (http://www.consbio.org/cbi/projects/show.php?page=roadless/roadless.htm), pp 70-73. Road segments from a US Forest Service roads layer were attributed to the most likely decade in which the road was built, as determined by an analysis of connectivity to clearcuts on the Tongass National Forest from that decade. It was assumed that following 1960, harvests required access to mills or extraction sites, and thus roads connecting to them were most likely built...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
Surficial Sediment Facies features near Shorty's Island on the Kootenai River near Bonners Ferry, ID
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The surficial bed-sediment facies, herein after referred to as the sediment facies, quantitatively describes the dominant sediment substrate on the surface of the river bed. Sediment facies categories were based on the grain size distribution of Wentworth (1922) which included the following ranges or combination of ranges: gravel (2-64mm), sand (0.063-2mm) and silt/clay (less than 0.063mm). An underwater video monitoring system UVMS...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. An Acoustic Doppler Current Profiler (ADCP) was used to survey streamflow characteristics including total streamflow, velocity magnitude and secondary flow structure, and backscatter intensity at 29 cross-sections at the Myrtle Creek Bend on the Kootenai River on June 1, 2012. Each of the 29 cross-sections consisted of 4 transects or bank-to-bank coverage to obtain a representative velocity pattern. The mean daily streamflow was...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The major clay step features are defined as having a vertical face that is greater than 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
These data were compiled for the use of training natural feature machine learning (GeoAI) detection and delineation. The natural feature classes include the Geographic Names Information System (GNIS) feature types Basins, Bays, Bends, Craters, Gaps, Guts, Islands, Lakes, Ridges and Valleys, and are an areal representation of those GNIS point features. Features were produced using heads-up digitizing from 2018 to 2019 by Dr. Sam Arundel's team at the U.S. Geological Survey, Center of Excellence for Geospatial Information Science, Rolla, Missouri, USA, and Dr. Wenwen Li's team in the School of Geographical Sciences at Arizona State University, Tempe, Arizona, USA. Figure 1 shows the areal boundary (cyan) of Bachelor...
This dataset depicts roads built on the Tongass National Forest during the 1970s. This dataset is part of a larger analysis of road building and timber harvest on the Tongass National Forest, compiled for the report Scientific Basis for Roadless Area Conservation (http://www.consbio.org/cbi/projects/show.php?page=roadless/roadless.htm), pp 70-73. Road segments from a US Forest Service roads layer were attributed to the most likely decade in which the road was built, as determined by an analysis of connectivity to clearcuts on the Tongass National Forest from that decade. It was assumed that following 1960, harvests required access to mills or extraction sites, and thus roads connecting to them were most likely built...
Due to the great differences in knowledge and availability of information on the biodiversity of the different marine regions from Mexico, it was decided to use the opinion of experts for the identification of the high-priority sites for the conservation of the marine biodiversity that includes coasts, the oceans and islands. For this aim, an experts workshop was conducted in October 2005 to determine the marine and coastal high-priority sites for conservation in Mexico. The workshop was organized by CONABIO, CONANP, Pronatura and TNC. After the workshop, the resulting sites were delimited and validated by means of an internet Wiki site, which served like a vestibule for the exchange of information and opinions...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The minor clay step features are defined as having a vertical face that is less than or equal to 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
This dataset depicts roads built on the Tongass National Forest during the 1990s. This dataset is part of a larger analysis of road building and timber harvest on the Tongass National Forest, compiled for the report Scientific Basis for Roadless Area Conservation (http://www.consbio.org/cbi/projects/show.php?page=roadless/roadless.htm), pp 70-73. Road segments from a US Forest Service roads layer were attributed to the most likely decade in which the road was built, as determined by an analysis of connectivity to clearcuts on the Tongass National Forest from that decade. It was assumed that following 1960, harvests required access to mills or extraction sites, and thus roads connecting to them were most likely built...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The egg-mat data describe a sub-set of the egg-mat network operated by the Idaho Department of Fish and Game. The sub-set inlcudes two sites, 1. near an area commonly known as Shorty's Island, and 2. near the Kootenai River confluence with Myrtle Creek at an area commonly known as Myrtle Bend. The egg-mats consist of artificial substrate mats that are deployed and retrieved every 24-48 hours by IDFG personnel. The egg-mat material...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The minor clay step features are defined as having a vertical face that is less than or equal to 1.5 meters. The clay step features were qualitately identified using an underwater video monitoring sysyem. The extent and magnitude of the clay steps were mapped using a muliteam bathymetric echosounder system.
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. The shaded relief raster data was created based on bathymetry obtained in the meander reach collected in about a one month period extending from 6/3/2010 - 6/19/2010. This subset data extends from river kilometer designator 228 upstream to 237. Similar methods used to collect and process the bathymetry are described in Fosness (2013). The shaded relief was created from a surface raster (also referred to as digital elevation model)...
|
|