Filters: Tags: permeability (X)
99 results (74ms)|
Filters
Date Range
Extensions Types Contacts
Categories
Tag Types
|
This USGS data release represents the data from the following publication: Maurer, D.K., 2011, Geologic framework and hydrogeology of the middle Carson River Basin, Eagle, Dayton, and Churchill Valleys, West-Central Nevada: U.S. Geological Survey Scientific Investigations Report 2011–5055, https://doi.org/10.3133/sir20115055.
The data are time series of laboratory strength and permeability measurements of 5 rock types. The tests were conducted as part of an interlaboratory comparison to determine repeatability of measurements using different test equipment and measurement techniques. These data represent the USGS contribution to the study. Other contributing organizations are archiving data sets separately.
The U.S. Geological Survey (USGS), in cooperation with the New Jersey Department of Environmental Protection (NJDEP), calculated several basin characteristics as part of the updated New Jersey StreamStats 2022 application (U.S. Geological Survey, 2022). These datasets are raster representations of various environmental, geological, and land use attributes within the New Jersey StreamStats 2022 study area; they are applied in the New Jersey 2022 application to describe delineated watersheds. This update features improvements in base elevation resolution from 10 meters to 10 feet and stream centerline hydrography from 1:24,000 to 1:2,400, as well as resampling of previously existing datasets to match the 10-foot resolution....
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This data set consists of digital polygons of constant hydraulic conductivity values for the Tillman terrace and alluvial aquifer in southwestern Oklahoma. The Tillman terrace and alluvial aquifer encompasses the unconsolidated terrace deposits and alluvium associated with the North Fork of the Red River and the Red River in the western half of Tillman County. These sediments consist of discontinuous layers of clay, sandy clay, sand,...
This data release contains monthly 270-meter gridded Basin Characterization Model (BCMv8) climate inputs and hydrologic outputs for Santa Clara River Valley (SCRV). Gridded climate inputs include: precipitation (ppt), minimum temperature (tmn), maximum temperature (tmx), and potential evapotranspiration (pet). Gridded hydrologic variables include: actual evapotranspiration (aet), climatic water deficit (cwd), snowpack (pck), recharge (rch), runoff (run), and soil storage (str). The units for temperature variables are degrees Celsius, and all other variables are in millimeters. Monthly historical variables from water years 1896 to 2019 are summarized into water year files and long-term average summaries for water...
This data release contains monthly 270-meter gridded Basin Characterization Model (BCMv8) climate inputs and hydrologic outputs for San Francisco Coastal South (SFCS). Gridded climate inputs include: precipitation (ppt), minimum temperature (tmn), maximum temperature (tmx), and potential evapotranspiration (pet). Gridded hydrologic variables include: actual evapotranspiration (aet), climatic water deficit (cwd), snowpack (pck), recharge (rch), runoff (run), and soil storage (str). The units for temperature variables are degrees Celsius, and all other variables are in millimeters. Monthly historical variables from water years 1896 to 2019 are summarized into water year files and long-term average summaries for water...
This data release contains monthly 270-meter gridded Basin Characterization Model (BCMv8) climate inputs and hydrologic outputs for Fort Bragg (FBG). Gridded climate inputs include: precipitation (ppt), minimum temperature (tmn), maximum temperature (tmx), and potential evapotranspiration (pet). Gridded hydrologic variables include: actual evapotranspiration (aet), climatic water deficit (cwd), snowpack (pck), recharge (rch), runoff (run), and soil storage (str). The units for temperature variables are degrees Celsius, and all other variables are in millimeters. Monthly historical variables from water years 1896 to 2019 are summarized into water year files and long-term average summaries for water years 1981-2010....
This data release contains monthly 270-meter gridded Basin Characterization Model (BCMv8) climate inputs and hydrologic outputs for Napa Sonoma (NSM). Gridded climate inputs include: precipitation (ppt), minimum temperature (tmn), maximum temperature (tmx), and potential evapotranspiration (pet). Gridded hydrologic variables include: actual evapotranspiration (aet), climatic water deficit (cwd), snowpack (pck), recharge (rch), runoff (run), and soil storage (str). The units for temperature variables are degrees Celsius, and all other variables are in millimeters. Monthly historical variables from water years 1896 to 2019 are summarized into water year files and long-term average summaries for water years 1981-2010....
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: California,
Napa,
Sonoma,
United States,
atmospheric and climatic processes,
Topoclimate diversity connotes the range of temperature and moisture regimes available to species as local habitat refugia under climate change scenarios (Dobrowski 2010). Areas rich in topoclimatic niches may increase species diversity (Kerr et al. 1997) and increase the likelihood for species persistence across multiple temporal scales (Luoto et al. 2008, Weiss et al. 1988). We defined the Topoclimate Diversity Index (TDI) as a combination of two extant indices, Heat Load Index (HLI) and Compound Topographic Index (CTI), each measured as a focal statistic across a 450-m radius neighborhood. Topo Div_Score: This score represents a focal statistics output (450 m radius from each focal cell), describing the range...
The State of Alaska Division of Geological & Geophysical Surveys (DGGS) is currently engaged in a multi-year study of the hydrocarbon potential of the Tertiary and Mesozoic strata in Cook Inlet basin. This report summarizes mercury injection capillary pressure (MICP) data for nine outcrop and measured section samples collected from the Naknek Formation on the Iniskin Peninsula in Cook Inlet. All samples were analyzed by PetroTech Associates, Houston, TX. Two of the samples were found to have overall capillary properties that would make them moderately good quality, Type B seals.
This data release contains mercury injection capillary pressure (MICP), pseudo-wetting saturation, and carbon dioxide (CO2) column height data for subsurface Tuscaloosa Group samples from Mississippi and Louisiana.
Categories: Data;
Tags: Adams County,
Amite County,
CO2 column,
East Feliciana Parish,
Energy Resources,
Efficiency of seepage meters, long considered a fixed property associated with the meter design, is not constant in highly permeable sediments. Instead, results from this study indicate that efficiency varies substantially with seepage-bag fullness, duration of bag attachment, depth of meter insertion into the sediments, and seepage velocity. Efficiency also varies substantially in response to variable hydraulic conductivity. The first worksheet titled "Literature efficiency" presents seepage-meter efficiency values from the literature to show the progression of efficiency versus time. The remaining 7 worksheets present time-series data showing seepage-meter efficiency related to several different tests: (1) flow...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Denver Federal Center, Jefferson County,
Hydrology,
Limnology,
USGS Science Data Catalog (SDC),
Water Resources,
One of the primary goals of South Korea’s second Ulleung Basin Gas Hydrate Expedition (UBGH2) was to examine the geotechnical properties of the marine sediment associated with methane gas hydrate occurrences found off the shore of eastern Korea in the Ulleung Basin, East Sea. Methane gas hydrate is a naturally occurring crystalline solid that sequesters methane in individual molecular cages formed by a lattice of water molecules. During UBGH2, concentrated gas hydrate was found in two sedimentary environments: thin, coarse-grained sediment layers interbedded with fine-grained sediment (fines, such as clays and muds) and as veins of essentially pure gas hydrate within beds of predominantly fine-grained sediment....
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
East Sea,
Geophysics,
South Korea,
This map service is an information surface which displays the hydrologic soil group class of each soil map unit based upon the dominant component in the soil map unit. Hydrologic soil groups are based on estimates of runoff potential. Soils are assigned to one of four groups according to the rate of water infiltration when the soils are not protected by vegetation, are thoroughly wet, and receive precipitation from long-duration storms. The soils in the United States are assigned to four groups (A, B, C, and D) and three dual classes (A/D, B/D, and C/D). The groups are defined as follows: Group A. Soils having a high infiltration rate (low runoff potential) when thoroughly wet. These consist mainly of deep, well...
Categories: Data;
Types: ArcGIS REST Map Service,
Map Service;
Tags: Hydrology,
hydrogeology,
infiltration,
permeability,
porosity,
This map service is an information surface representing the amount of available water storage (AWS) that is available to plants in the top 25cm (9.84 inches) of soil. Available Water Storage (AWS) is expressed as centimeters of water, reported as the average of all components in the map unit. AWS is calculated from AWC (Available Water Capacity) which is commonly estimated as the difference between the water contents at 1/10 or 1/3 bar (field capacity) and 15 bars (permanent wilting point) tension, and adjusted for salinity and fragments. Available Water Storage (AWS) surfaces are available through arcgis.com for four soil depths, 25, 50, 100, and 150 centimeters from the surface of the soil. They are available...
Categories: Data;
Types: ArcGIS REST Map Service,
Map Service;
Tags: Plants,
permeability,
porosity,
soil moisture,
storage,
These data tables describe the inputs and parameters for the 3D petroleum systems model. This section of data is included for users wishing to rebuild the 3D basin model from scratch, either in PetroMod or another basin modeling software package. All inputs and settings for model construction are included. Settings summaries are provided in a data bundle of comma-separated value (CSV) tables. Also included is the “Williston_Basin_model_inputs_glossary.csv” data table that provides a brief description of all the columns/value fields in the data bundle. This is a child item of a larger data release titled "Data release for the 3D petroleum systems model of the Williston Basin, USA".
This data release contains monthly 270-meter resolution Basin Characterization Model (BCMv8) climate and hydrologic variables for Localized Constructed Analog (LOCA; Pierce et al., 2014)-downscaled CanESM2 Global Climate Model (GCM) for Representative Concentration Pathway (RCP) 4.5 (medium-low emissions) and 8.5 (high emissions) for hydrologic California. The LOCA climate scenarios span water years 1950 to 2099 with greenhouse-gas forcings beginning in 2006. The LOCA downscaling method has been shown to produce better estimates of extreme events and reduces the common downscaling problem of too many low-precipitation days (Pierce et al., 2014). Ten GCMs were selected from the full ensemble of models from the fifth...
This data release contains monthly 270-meter resolution Basin Characterization Model (BCMv8) climate and hydrologic variables for Localized Constructed Analog (LOCA; Pierce et al., 2014)-downscaled CMCC-CMS Global Climate Model (GCM) for Representative Concentration Pathway (RCP) 4.5 (medium-low emissions) and 8.5 (high emissions) for hydrologic California. The LOCA climate scenarios span water years 1950 to 2099 with greenhouse-gas forcings beginning in 2006. The LOCA downscaling method has been shown to produce better estimates of extreme events and reduces the common downscaling problem of too many low-precipitation days (Pierce et al., 2014). Ten GCMs were selected from the full ensemble of models from the fifth...
This data release contains monthly 270-meter gridded Basin Characterization Model (BCMv8) climate inputs and hydrologic outputs for Mattole (MAT). Gridded climate inputs include: precipitation (ppt), minimum temperature (tmn), maximum temperature (tmx), and potential evapotranspiration (pet). Gridded hydrologic variables include: actual evapotranspiration (aet), climatic water deficit (cwd), snowpack (pck), recharge (rch), runoff (run), and soil storage (str). The units for temperature variables are degrees Celsius, and all other variables are in millimeters. Monthly historical variables from water years 1896 to 2019 are summarized into water year files and long-term average summaries for water years 1981-2010....
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: California,
Mattole,
United States,
atmospheric and climatic processes,
climatologyMeteorologyAtmosphere,
|
|
