Filters: Tags: remote sensing (X) > Date Range: {"choice":"month"} (X)
106 results (49ms)|
Filters
Date Types (for Date Range)
Types
Contacts
Categories Tag Types
|
This data release contains time-lapse imagery taken at U.S. Geological Survey (USGS) stream gaging stations with associated hydrologic and meteorological data related to each image. These data are to help improve the development of models in detecting water elevation at a given stream gaging station. Images of the water surface and surroundings at USGS stream gaging stations were taken at varying time intervals ranging between every five minutes to an hour. Cameras used include trail cameras, web cameras, and the custom river imagery sensing (RISE) camera. Time-lapse images for each USGS stream gaging station are provided in compressed files (file extension .7z). These files are named in a format to identify the...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Remote Sensing,
USGS Science Data Catalog (SDC),
Water Resources,
camera,
image,
These data represent total vegetation and surface water along approximately 12 kilometers of the Paria River upstream from the confluence of the Colorado River at Lees Ferry, Arizona. They are derived from airborne, multispectral imagery obtained in late May 2009, 2013, and 2021, collected with a push-broom sensor with 4 spectral bands depicting Blue, Green, Red and Near-Infrared wavelengths at a spatial resolution of 20 centimeters. The vegetation classification data were created using a supervised classification algorithm provided by Harris Geospatial in ENVI version 5.6.3 (Exelis Visual Information Solutions, Boulder, Colorado). The water data were created using a Green Normalized Difference Vegetation Index...
LANDFIRE's (LF) 2022 Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. CC supplies information for fire behavior models to determine the probability of crown fire initiation, provide input in the spotting model, calculate wind reductions, and to calculate fuel moisture conditioning. To create this product, plot level CC values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance CC and Canopy Height (CH) are used as predictors of disturbed CC using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and...
LANDFIRE (LF) 2022 Fuel Vegetation Cover (FVC) represents the LF Existing Vegetation Cover (EVC) product, modified to represent pre-disturbance EVC in areas where disturbances have occurred over the past 10 years. EVC is mapped as continuous estimates of canopy cover for tree, shrub, and herbaceous lifeforms with a potential range from 10% to 100%. Continuous EVC values are binned to align with fuel model assignments when creating FVC. FVC is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVC is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance...
The LANDFIRE (LF) Canadian Forest Fire Danger Rating System (CFFDRS) product depicts fuel types as an identifiable association of fuel elements of distinctive species, form, size, arrangement, and continuity. CFFDRS exhibits characteristic fire behavior under the specified burn conditions. In LF 2022 Canadian fuel models are derived from the Fuel Model Guide to Alaska Vegetation (Alaska Fuel Model Guide Task Group, 2018) and subsequent updates. The LF CFFDRS product contains the fuel models used for the Fire Behavior Prediction (FBP) system fuel type inputs. Default values assigned to the Canadian Fuel Models required to run the Prometheus fire behavior software (Prometheus, 2021) are added as attributes to the...
LANDFIRE's (LF) 2022 Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create this product, plot level CH values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance Canopy Cover and CH are used as predictors of disturbed CH using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and time since...
LANDFIRE (LF) disturbance products are developed to provide temporal and spatial information related to landscape change. LF 2022 Fuel Disturbance (FDist) uses the latest Annual Disturbance products from the effective disturbance years of 2013 to 2022. FDist is created from LF 2022 Historical Disturbance (HDist) which in turn aggregates the Annual Disturbance products. FDist groups similar disturbance types, severities and time since disturbance categories which represent disturbance scenarios within the fuel environment. FDist is used in conjunction with Fuel Vegetation Type (FVT), Cover (FVC), and Height (FVH) to calculate Canopy Cover (CC), Canopy Height (CH), Canopy Bulk Density (CBD), Canopy Base Height (CBH),...
These data were compiled for Cabeza Prieta National Wildlife Refuge (CPNWR) in southern Arizona, to support managment efforts of water resources and wildlife conservation. Objective(s) of our study were to 1) measure water storage capacity at select stage heights in three tanks (also termed tinajas), 2) build a stage storage model to help CPNWR staff accurately estimate water volumes throughout the year, and 3) collect topographic data adjacent to the tanks as a means to help connect these survey data to past or future work. These data represent high-resolution (sub-meter) ground based lidar measurements used to meet these objectives and are provided as: processed lidar files (point clouds), rasters (digital elevation...
These data were collected to support the development of detection and classification algorithms to support Bureau of Ocean Energy Management (BOEM) studies and assessments associated with offshore wind energy production. There are 3 child zip files included in this data release. 01_Codebase.zip contains a codebase for using deep learning to filter images based on the probability of any bird occurrence. It includes instructions and files necessary for training, validating, and testing a machine learning detection algorithm. 02_Imagery.zip contains imagery that were collected using a Partenavia P68 fixed-wing airplane using a PhaseOne iXU-R 180 forward motion compensating 80-megapixel digital frame camera with...
We developed habitat suitability models for three invasive plant species: stiltgrass (Microstegium vimineum), sericea lespedeza (Lespedeza cuneata), and privet (Ligustrum sinense). We applied the modeling workflow developed in Young et al. 2020, developing similar models for occurrence data, but also models trained using species locations with percent cover ≥10%, ≥25%, and ≥50%. We chose predictors from a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1) and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using...
The Louisiana State Legislature created the Coastal Wetlands Planning, Protection and Restoration Act (CWPPRA) in order to conserve, restore, create and enhance Louisiana's coastal wetlands. The wetland restoration plans developed pursuant to these acts specifically require an evaluation of the effectiveness of each coastal wetlands restoration project in achieving long-term solutions to arresting coastal wetlands loss. This data set includes mosaicked aerial photographs for the Hopedale Hydrologic Restoration (PO-24) project for 2021. This data is used as a basemap land-water classification. It also serves as a visual tool for project managers to help them identify any obvious problems or land loss within their...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CWPPRA,
Geography,
Gulf of Mexico,
Land Use Change,
Louisiana,
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Height (EVH) represents the average height of the dominant vegetation for a 30-m cell. EVH is produced separately for tree, shrub, and herbaceous lifeforms using training data depicting the weighted average height by species cover and Existing Vegetation Type (EVT) lifeform. Decision tree models using field reference data, lidar, and Landsat are developed separately for each lifeform, then lifeform specific height class layers are merged along with land cover into a single EVH product based on the dominant lifeform of each pixel. EVH ranges are continuous for the herbaceous lifeform category ranging from 0.1 to 1 meter with decimeter increments, 0.1 to 3...
LANDFIRE’s (LF) Annual Disturbance products provide temporal and spatial information related to landscape change. Annual Disturbance depicts areas of 4.5 hectares (11 acres) or larger that have experienced a natural or anthropogenic landscape change (or treatment) within a given year. For the creation of the Annual Disturbance product, information sources include national fire mapping programs such as Monitoring Trends in Burn Severity (MTBS), Burned Area Reflectance Classification (BARC) and Rapid Assessment of Vegetation Condition after Wildfire (RAVG), 18 types of agency-contributed “event” perimeters (see LF Public Events Geodatabase), and remotely sensed Landsat imagery. To create the LF Annual Disturbance...
LANDFIRE's (LF) 2022 Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. CC supplies information for fire behavior models to determine the probability of crown fire initiation, provide input in the spotting model, calculate wind reductions, and to calculate fuel moisture conditioning. To create this product, plot level CC values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance CC and Canopy Height (CH) are used as predictors of disturbed CC using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and...
LANDFIRE’s (LF) 2022 Vegetation Departure (VDep) product categorizes departure between current vegetation condition and reference vegetation condition, according to the methods outlined in the Interagency Fire Regime Condition Class Guidebook (FRCC Guidebook (Hann et al 2010)). VDep differs from the FRCC Guidebook, however, because it is based on the departure of current vegetation condition only, whereas the FRCC Guidebook approach includes departure of current fire regimes for the reference period. For VDep, summary units are defined as a BioPhysical Setting (BpS) with identical reference condition values regardless of map zone. For example, when a BpS is present in map zone 1, 2, 4, 5, 6 and 8, the reference...
This dataset includes georeferenced, high-resolution, airborne thermal infrared (TIR) and high-resolution true-color imagery, a polyline shapefile of the channel centerline, a polyline shapefile with TIR sample points for longitudinal stream temperature profiles, and a tabular file with longitudinal stream temperature profiles for the Donner und Blitzen River and its tributaries, Oregon. The aerial TIR surveys were conducted with a helicopter by NV5 Geospatial and are published as 17 raster mosaics in GeoTiff format with a resolution of 0.3 meters (m). The TIR mosaics contain corrected surface temperatures in degrees Celsius (C) (multiplied by 10 to create an unsigned integer pixel type). The longitudinal stream...
Categories: Data;
Tags: Aquatic Biology,
Donner und Blitzen River,
Geomorphology,
Harney County,
Hydrology,
The data are a long-term (1980-present), daily reanalysis of reference evapotranspiration, covering the globe at a spatial resolution of 0.625° Longitude x 0.5° Latitude. Reference evapotranspiration is a measure of evaporative demand, or the "thirst of the atmosphere", basically how much moisture from the surface could evaporate into overpassing air, assuming (i) that enough water is available to evaporate and (ii) the surface is covered with a specific reference crop that completely shades the ground (some other conditions also apply). For this dataset, reference evapotranspiration is derived from the daily implementation of the Penman-Monteith reference evapotranspiration equation (Monteith, 1965) as codified...
Categories: Data,
Data Release - Revised;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Raster;
Tags: Climatology,
Remote Sensing,
USGS Science Data Catalog (SDC),
Water Resources,
climatologyMeteorologyAtmosphere,
Climatic extremes are becoming more frequent with climate change and have the potential to cause major ecological shifts and ecosystem collapse. With the ecosystem collapse these normally healthy marshes fragment and convert to open water. Along the northern Gulf of Mexico, a coastal wetland in the San Bernard National Wildlife Refuge in Texas suffered significant and acute vegetation dieback following Hurricane Harvey in 2017. Using Uncrewed Aerial Systems (UAS) we acquired high resolution imagery to identify plant types that may correlate with elevation levels. Most plant species will fall into the succulents, graminoids, and Spartina alterniflora marsh types. These degraded marsh areas are classified into 5 categories:...
Note: This data release is currently under revision and is temporarily unavailable. Phenological dynamics of terrestrial ecosystems reflect the response of the Earth's vegetation canopy to changes in climate and hydrology and are thus important to monitor operationally. The Exotic Annual Grass (EAG) phenology in the western U.S. rangeland based on 30m near seamless Harmonized Landsat and Sentinel-2 (HLS) Normalized Difference Vegetation Index (NDVI) weekly composites between 2016 and 2021 (Dahal et al., 2022) were processed using these 3 methods: (1) NDVI threshold-based method, (2) manual phenological metrics, and (3) modeling and mapping. The EAG phenology model produced eight metrics identifying the sustainable...
This dataset provides high-resolution, species-specific land cover maps for the Hawaiian island of Lāna'i based on 2020 WorldView-2 satellite imagery. Machine learning models were trained on extensive ground control polygons and points. The land cover maps capture the distribution and diversity of vegetation with high accuracy to support conservation planning and monitoring. This data release consists of two child items, one containing the field and expert collected ground control data used to train our models, and another consisting of resulting land cover maps for the island of Lāna‘i. The research effort that generated these input data, and products are carefully described in the associated manuscript Berio Fortini...
|
|
