Filters: Tags: streamflow modeling (X) > Date Range: {"choice":"year"} (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
19 results (38ms)
Filters
Date Types (for Date Range)
Contacts
Categories Tag Types Tag Schemes |
This data release contains inputs for and outputs from hydrologic simulations for the conterminous United States (CONUS) using the Precipitation Runoff Modeling System (PRMS) version 5.1.0 and the USGS National Hydrologic Model Infrastructure (NHMI, Regan and others, 2018). Historical simulations using the Maurer forcings (Maurer and others, 2002) were conducted for the period 1950-2010. This metadata record documents the simulation output files for simulations ran using the dynamic parameters file. The output files are aggregated at the HUC4 level and are grouped and downloadable by HUC2 hydrologic region. Each zip folder contains identical information, just for a different region and set of hydrologic response...
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains atmospheric forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, using the Representative Concentration Pathway 4.5 for simulating potential future streamflow for the period 2006 - 2100.
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains outputs of streamflow for each stream segment in the model domain and is based on parameterization with dynamic land cover. The parameters that were allowed to vary were related to dominant land cover type, percent impervious area, and precipitation interception by the plant canopy and snowpack.The PRMS parameters describing vegetation and impervious area were derived from annual estimates of land cover to incorporate...
In 2009, the Kentucky Water Science Center completed the Water Availability Tool for Environmental Resources (WATER-KY), which provided the ability to simulate streamflow for the period 1980-2000. This model integrated TOPMODEL (Beven and Kirkby, 1979) for pervious portions of the landscape with simulation of flow generated from impervious surfaces (USDA, 1986). Associated products included a flow-duration curve, load-duration curves when water-quality data were available, and general water balance. WATER-KY required a dedicated ArcGIS license with the Spatial Analyst extension, which made it difficult to use for some cooperators and limited integration with other hydrologic approaches. This new version translates...
As part of the Coastal Carolinas Focus Area Study of the U.S. Geological Survey National Water Census Program, the Soil and Water Assessment Tool (SWAT) was used to develop models for the Pee Dee River Basin, North Carolina and South Carolina, to simulate future streamflow and irrigation demand based on land use, climate, and water demand projections. SWAT is a basin-scale, process-based watershed model with the capability of simulating water-management scenarios. Model basins were divided into approximately two-square mile subbasins and subsequently divided into smaller, discrete hydrologic response units based on land use, slope, and soil type. The calibration period for the historic model was 2000 to 2014. The...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alexander,
Alleghany,
Anson,
Ashe,
Bladen,
This data release contains inputs for and outputs from hydrologic simulations for the conterminous United States (CONUS) using the Precipitation Runoff Modeling System (PRMS) version 5.1.0 and the USGS National Hydrologic Model Infrastructure (NHMI, Regan and others, 2018). Historical simulations using the Maurer forcings (Maurer and others, 2002) were conducted for the period 1950-2010. This metadata record documents the simulation output files for simulations ran using the static parameters file. The output files are aggregated at the HUC4 level and are grouped and downloadable by HUC2 hydrologic region. Each zip folder contains identical information, just for a different region and set of hydrologic response...
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains a suite of 52 streamflow metrics. These metrics were computed using daily outputs of runoff from HRUs (PRMS variable hru_outflow) and streamflow from the model stream segments (PRMS variable seg_outflow) for all historical and future simulations (table1_GCMs_used.csv) with both static and dynamic land cover parameters. These streamflow statistics describe the duration, frequency, magnitude, rate of change, and...
Categories: Data;
Tags: United States,
air temperature,
inlandWaters,
model,
precipitation (atmospheric),
This data release contains inputs for and outputs from hydrologic simulations for the conterminous United States (CONUS) using the Precipitation Runoff Modeling System (PRMS) version 5.1.0 and the USGS National Hydrologic Model Infrastructure (NHMI, Regan and others, 2018). Historical simulations using the Maurer atmospheric forcings (Maurer and others, 2002) were produced for the period 1950-2010. These data document the PRMS climate input data files for these simulations. Input files for the simulations include the PRMS base parameter file and five dynamic parameter files that update model parameters on an annual time step for impervious area, dominant land cover type, and canopy interception. Maurer forcings...
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, using the Representative Concentration Pathway 8.5 for simulating potential future streamflow for the period 2006 - 2100.
The USGS and Newmont Mining Corp. surveyed 51 cross sections to determine hydraulic characteristics throughout 12 model reaches. The accuracy of the surveyed cross sections is believed to be +/- 0.5 ft. Field surveys included measuring the channel cross section up to the approximate altitude of the highest flood and includes auxiliary channels. Surveyed cross sections generally were at representative locations about every 3 miles along the Humboldt River channel. In areas where long overbank sections occurred, supplemental altitudes were determined from topographic maps in order to extend surveyed parts of cross sections so that each section represented the full width of the floodplain. In this dataset there is...
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains the spatial model features (hydrologic response units [HRU_subset.zip] and stream segments [Segments_subset.zip]) on which model inputs and outputs are based. The assembly of model-ready files results in HRU and segment IDs that are different than those in the NHMI database. Two "crosswalk files" (nhm_hru_id_crosswalk.csv, nhm_segment_id_crosswalk.csv) are provided so that the model inputs and outputs can be mapped...
Categories: Data;
Tags: United States,
air temperature,
inlandWaters,
model,
precipitation (atmospheric),
This data release contains input and output data from hydrologic simulations of streamflow conditions in the Red River Basin (RRB) using the Precipitation-Runoff Modeling System (PRMS). The RRB PRMS model predicts components of the water balance at 3065 hydrologic response units (HRU) and streamflow for 1614 stream segments within the model domain for the simulation period 1981 to 2016. The data release contains two shapefiles: (1) a map of HRUs in the model domain and (2) a map of stream segments in the model domain. In addition to the shapefiles, the data release includes files containing the calibrated parameters of the RRB PRMS model as well as model inputs and outputs. The model inputs are (1) climate data,...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Arkansas,
Daymet,
HRU,
Hydrology,
Louisiana,
This data release contains inputs for and outputs from hydrologic simulations for the conterminous United States (CONUS) using the Precipitation Runoff Modeling System (PRMS) version 5.1.0 (https://www.usgs.gov/software/precipitation-runoff-modeling-system-prms) and the USGS National Hydrologic Model Infrastructure (NHMI, Regan and others, 2018). These simulations were developed to provide estimates of the water budget and statistics of streamflow for historical and potential future conditions using atmospheric forcing data from Coupled Model Intercomparison Project phase 5 (CMIP5). Specific file types include: 1) input forcings of minimum air temperature, maximum air temperature, and daily precipitation derived...
Categories: Data;
Tags: Climatology,
Hydrology,
Land Use Change,
USGS Science Data Catalog (SDC),
United States,
As part of the Coastal Carolinas Focus Area Study of the U.S. Geological Survey National Water Census Program, the Soil and Water Assessment Tool (SWAT) was used to develop models for the Cape Fear River Basin, North Carolina, to simulate future streamflow and irrigation demand based on land use, climate, and water demand projections. SWAT is a basin-scale, process-based watershed model with the capability of simulating water-management scenarios. Model basins were divided into approximately two-square mile subbasins and subsequently divided into smaller, discrete hydrologic response units based on land use, slope, and soil type. The calibration period for the historic model was 2000 to 2014. The best available...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alamance,
Bladen,
Brunswick,
Cape Fear,
Caswell,
This data release provides results from a watershed modelling effort to depict the use of natural infrastructure in dryland streams (NIDS), i.e., gabions, as a low-tech and low-cost, nature-based solution for increased water availability in the Buckeye area, west of the White Tank mountains and northwest of Phoenix, AZ, USA. Our goal was to identify impacts of current management and hypothetical installation of gabions, as NIDS to offset expected impacts of planned development (Norman et al., 2022; Tosline & Swick, 2023). This release and associated report (Norman & Petrakis, 2024) describes the methods and results acquired for modeling installation of gabion-style NIDS and the impacts at the apex and outlet of...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Arizona,
Geography,
Hassayampa,
Hydrology,
Land Use Change,
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains atmospheric forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, using the Representative Concentration Pathway (RCP) 2.6 for simulating potential future streamflow for the period 2006 - 2100.
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains atmospheric forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation accumulation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, for simulating historical streamflow for the period 1950 - 2005.
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains forcings (daily minimum air temperature, daily maximum air temperature, and daily precipitation) from each of the global circulation models (GCMs) presented in table1_GCMs_used.csv, using the Representative Concentration Pathway (RCP) 6.0 for simulating potential future streamflow for the period 2006 - 2100.
The continental United States (CONUS) was modeled to produce simulations of historical and potential future streamflow using the Precipitation-Runoff Modeling System (PRMS) application of the USGS National Hydrologic Model Infrastructure (NHMI; Regan and others, 2018). This child page specifically contains outputs of streamflow for each stream segment in the model domain and is based on parameterization with static land cover. Simulations were conducted for each of the global circulation model (GCMs) and relative concentration pathway (RCP) presented in table1_GCMs_used.csv.
|
|