Skip to main content
Advanced Search

Filters: Tags: streamgage (X) > Types: Map Service (X)

10 results (10ms)   

View Results as: JSON ATOM CSV
thumbnail
In cooperation with the South Carolina Department of Transportation (SCDOT), the U.S. Geological Survey prepared geospatial layers illustrating the boundaries of the regions used in the South Carolina (SC) Stream Hydrograph Methods presented in Bohman (1990,1992). The region limits were described in written text and depicted in figures in Bohman (1990, 1992), but have not been provided as geospatial layers (due to the age of the original publications). This project used best-available geospatial data from the U.S. Environmental Protection Agency (USEPA) ecoregions (2013) to create equivalent geospatial representations of the Bohman (1990, 1992) region boundaries for the SC Stream Hydrograph Methods. These layers...
thumbnail
This community is established for communities that wish to use Data Entry for Project Tracking and Highlighting (DEPTH) web application. Communities must be added as a shortcut to the DEPTH Community in order to use the DEPTH interface.
thumbnail
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata. The geospatial data include inundation extents, corresponding inundation depths, and the study area boundaries. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan, Colorado from Morgan County...
thumbnail
Ratings are used for a variety of reasons in water-resources investigations. The simplest rating relates discharge to the stage of the river. From a pure hydrodynamics perspective, all rivers and streams have some form of hysteresis in the relation between stage and discharge because of unsteady flow as a flood wave passes. Simple ratings are unable to represent hysteresis in a stage/discharge relation. A dynamic rating method is capable of capturing hysteresis owing to the variable energy slope caused by unsteady momentum and pressure. Using some simplifying assumptions, Fread (1973) developed what was termed a “dynamic loop” rating method to compute discharge from a time series of stage at a single streamgage...
thumbnail
Reliable estimates of the magnitude and frequency of floods are an important part of the framework for hydraulic-structure design and flood-plain management. Annual peak flows measured at U.S. Geological Survey streamgages are used to compute flood-frequency estimates at those streamgages. However, flood-frequency estimates also are needed at ungaged stream locations. A process known as regionalization was used to develop regression equations to estimate the magnitude and frequency of floods at ungaged locations. This dataset contains the supporting tables and updated hydrologic region boundaries used in the 2017 flood-frequency study for Georgia, South Carolina, and North Carolina.
thumbnail
The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These...
thumbnail
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. The model archive contains two model runs, the calibration model run and the flood inundation model run. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan,...
thumbnail
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata, and the model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at...
thumbnail
The U.S. Geological Survey (USGS) Oklahoma-Texas Water Science Center, in cooperation with the Oklahoma Department of Transportation, updated basin-characteristic data for Oklahoma streams with drainage areas of less than 2,510 square miles. Basin characteristics were updated or created for 248 streamgages. The previously published Oklahoma generalized skew map, a necessary element in the development of the peak-streamflow frequencies was updated. Compared to a previous dataset described in (Lewis, 2010), this dataset incorporates an additional 9 years of annual peak-streamflow data, including 2 years when major peak-streamflows were recorded (2015 and 2017). The additional years of data collection since the publication...
thumbnail
Reliable estimates of the magnitude and frequency of floods are an important part of the framework for hydraulic-structure design and flood-plain management in Georgia, South Carolina, and North Carolina (study area). Annual peak flows measured at U.S. Geological Survey streamgages were used to compute at-site flood-frequency estimates at those streamgages in the study area based on annual peak-flows records through 2017. Flood-frequency estimates also are needed at ungaged stream locations. A process known as regionalization was used to develop regression equations to estimate the magnitude and frequency of floods at ungaged locations. This model archive provides the inputs and outputs for (1) the at-site flood-frequency...


    map background search result map search result map DEPTH Community Cross-Section Data and Pressure Transducer Location of the South Platte River near Fort Morgan, Colorado, 2017 Geospatial Data and Surface-Water Model Archive for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Geospatial Data for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Surface-Water Model Archive for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Data Release of Basin Characteristics, Generalized Skew Map, and Peak-Streamflow Frequency Estimates in Oklahoma, 2017 (ver. 1.1, September 2020) Magnitude and Frequency of Floods for Rural Streams in Georgia, South Carolina, and North Carolina, 2017-Data Model Archive for Magnitude and Frequency of Floods for Rural Streams in Georgia, South Carolina, and North Carolina, 2017 Dynamic stage to discharge rating model archive Region Layers for USGS South Carolina Bohman Method Hydrograph in StreamStats Geospatial Data and Surface-Water Model Archive for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Geospatial Data for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Surface-Water Model Archive for a Flood-Inundation Mapping Study of the South Platte River at Fort Morgan, Colorado, 2018 Cross-Section Data and Pressure Transducer Location of the South Platte River near Fort Morgan, Colorado, 2017 Region Layers for USGS South Carolina Bohman Method Hydrograph in StreamStats DEPTH Community Data Release of Basin Characteristics, Generalized Skew Map, and Peak-Streamflow Frequency Estimates in Oklahoma, 2017 (ver. 1.1, September 2020) Model Archive for Magnitude and Frequency of Floods for Rural Streams in Georgia, South Carolina, and North Carolina, 2017 Magnitude and Frequency of Floods for Rural Streams in Georgia, South Carolina, and North Carolina, 2017-Data Dynamic stage to discharge rating model archive