Filters: Tags: streamgage (X)
20 results (27ms)|
Filters
Date Range
Extensions (Less) Types (Less)
Contacts (Less)
Categories (Less) Tag Types Tag Schemes |
The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These...
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This dataset represents 19,031 basin boundaries and their streamgage locations for the U.S. Geological Survey's (USGS) active and historical streamgages from the published dataset of Stewart and others (2006) and its subsequent updates (D.W. Stewart, USGS, written commun., 2011). Only the basin boundaries that were delineated within 15 percent of the basin area reported in the National Water Information System (NWIS) were included...
In cooperation with the South Carolina Department of Transportation (SCDOT), the U.S. Geological Survey prepared geospatial layers illustrating the boundaries of the regions used in the South Carolina (SC) Stream Hydrograph Methods presented in Bohman (1990,1992). The region limits were described in written text and depicted in figures in Bohman (1990, 1992), but have not been provided as geospatial layers (due to the age of the original publications). This project used best-available geospatial data from the U.S. Environmental Protection Agency (USEPA) ecoregions (2013) to create equivalent geospatial representations of the Bohman (1990, 1992) region boundaries for the SC Stream Hydrograph Methods. These layers...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Georgia,
Hydrology,
North Carolina,
South Carolina,
USGS Science Data Catalog (SDC),
The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These...
This community catalog serves the USGS Pennsylvania Water Science Center. The Water Science Center's mission is to collect, analyze and disseminate the impartial hydrologic data and information needed to wisely manage water resources for the people of the United States and the Commonwealth of Pennsylvania. In Pennsylvania, the USGS's water-resources roots date back to the late 1800's, with the initiation of streamflow gaging on the Delaware and Susquehanna Rivers and the evaluation of groundwater resources in various parts of the Commonwealth. Today, the Pennsylvania Water Science Center's cadre of nearly 80 scientists, technicians, and support staff in New Cumberland, Exton, Pittsburgh, and Williamsport work in...
The purpose of this USGS data release is to publish NC SELDM streamflow statistics and summary statistics of physical and chemical data in support of the information provided in the above-referenced report. This data release consists of two data sets, "NC SELDM streamflow statistics..." and "NC SELDM summary statistics for physical and chemical data...". The tables that are uploaded for the "NC SELDM streamflow statistics for 266 streamgages across North Carolina" sub-section are primarily the support files for the StreamStatsDB update that was completed when the report was approved. These files were generated using the GNWISQ and QSTATS computer programs developed and described by Granato (2009, appendices 1 and...
Categories: Data;
Tags: Anthropocene (Temporal),
North Carolina,
Stochastic Empirical Loading and Dilution Model,
StreamStats,
StreamStatsDB,
In 2016, non-interpretive streamflow statistics were compiled for streamgages located throughout the Nation and stored in the StreamStatsDB database for use with StreamStats and other applications. Two previously published USGS computer programs that were designed to help calculate streamflow statistics were updated to better support StreamStats as part of this effort. These programs are named “GNWISQ” (Get National Water Information System Streamflow (Q) files) and “QSTATS” (Streamflow (Q) Statistics). Statistics for 20,438 streamgages that had 1 or more complete years of record during water years 1901 through 2015 were calculated from daily mean streamflow data; 19,415 of these streamgages were within the conterminous...
This community is established for communities that wish to use Data Entry for Project Tracking and Highlighting (DEPTH) web application. Communities must be added as a shortcut to the DEPTH Community in order to use the DEPTH interface.
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Hurricane Sandy,
Marcellus Shale,
NY,
New York,
StreamStats,
This dataset represents 9,097 basin boundaries (rdews_gages.shp) of select U.S. Geological Survey's (USGS) active and historical stream gages derived from the published datasets of stream gage basins (Wieczorek, 2006), GAGESII (Falcone, 2011), and delineated from digital elevation models found in the NHDPlus version 1 data suite (NHDPlus, 2006). These basins were created to assist in spatial processing of model inputs for the U.S. Geological Survey's (USGS) Data-Driven Drought Prediction Project of the Drought Science Program within the Water Resources Mission Area's Water Resource Availability Program.
The U.S. Geological Survey (USGS) has a long history of working cooperatively with the South Carolina Department of Transportation to develop methods for estimating the magnitude and frequency of floods for rural and urban basins that have minimal to no regulation or tidal influence. As part of those previous investigations, flood-frequency estimates have been generated at selected regulated streamgages. This is the data release for the report which assesses the effects of impoundments on flood-frequency characteristics by comparing annual exceedance probability (AEP) streamflows from pre- and post-regulated (before and after impoundment) periods at 18 USGS long-term streamgages, which is defined as a streamgage...
The purpose of this USGS data release is to publish NC SELDM streamflow statistics and summary statistics of physical and chemical data in support of the information provided in the above-referenced report. This data release consists of two data sets, "NC SELDM streamflow statistics..." and "NC SELDM summary statistics for physical and chemical data...". The tables that are uploaded for the "NC SELDM streamflow statistics for 266 streamgages across North Carolina" sub-section are primarily the support files for the StreamStatsDB update that was completed when the report was approved. These files were generated using the GNWISQ and QSTATS computer programs developed and described by Granato (2009, appendices 1 and...
Categories: Data;
Tags: North Carolina,
Stochastic Empirical Loading and Dilution Model,
StreamStats,
StreamStatsDB,
flow durations,
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata. The geospatial data include inundation extents, corresponding inundation depths, and the study area boundaries. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan, Colorado from Morgan County...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado (CO),
Fort Morgan,
GIS,
Morgan County,
South Platte River,
Ratings are used for a variety of reasons in water-resources investigations. The simplest rating relates discharge to the stage of the river. From a pure hydrodynamics perspective, all rivers and streams have some form of hysteresis in the relation between stage and discharge because of unsteady flow as a flood wave passes. Simple ratings are unable to represent hysteresis in a stage/discharge relation. A dynamic rating method is capable of capturing hysteresis owing to the variable energy slope caused by unsteady momentum and pressure. Using some simplifying assumptions, Fread (1973) developed what was termed a “dynamic loop” rating method to compute discharge from a time series of stage at a single streamgage...
Reliable estimates of the magnitude and frequency of floods are an important part of the framework for hydraulic-structure design and flood-plain management. Annual peak flows measured at U.S. Geological Survey streamgages are used to compute flood-frequency estimates at those streamgages. However, flood-frequency estimates also are needed at ungaged stream locations. A process known as regionalization was used to develop regression equations to estimate the magnitude and frequency of floods at ungaged locations. This dataset contains the supporting tables and updated hydrologic region boundaries used in the 2017 flood-frequency study for Georgia, South Carolina, and North Carolina.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Alabama,
Florida,
Georgia,
Hydrology,
North Carolina,
The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado,
Fort Morgan,
Geomorphology,
Morgan County,
South Platte River,
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. The model archive contains two model runs, the calibration model run and the flood inundation model run. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan,...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado (CO),
Fort Morgan,
GIS,
Morgan County,
South Platte River,
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata, and the model archive dataset contains all relevant files to document and re-run the surface-water hydraulic model that are discussed in the report. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado,
Fort Morgan,
GIS,
Model Archive,
Morgan County,
The U.S. Geological Survey (USGS) Oklahoma-Texas Water Science Center, in cooperation with the Oklahoma Department of Transportation, updated basin-characteristic data for Oklahoma streams with drainage areas of less than 2,510 square miles. Basin characteristics were updated or created for 248 streamgages. The previously published Oklahoma generalized skew map, a necessary element in the development of the peak-streamflow frequencies was updated. Compared to a previous dataset described in (Lewis, 2010), this dataset incorporates an additional 9 years of annual peak-streamflow data, including 2 years when major peak-streamflows were recorded (2015 and 2017). The additional years of data collection since the publication...
Categories: Data,
Data Release - Revised;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Oklahoma,
Texas,
USGS Science Data Catalog (SDC),
digital elevation models,
drainage basins,
This is a terrestrial LiDAR laser scanner dataset collected on October 14, 2020, in response to a flow event that occurred on September 8, 2020, at the USGS streamgage 09471580 - San Pedro River at St David, AZ. The reach scanned for this study is located at the bridge where State Route 80 crosses the waterway. A Leica MS-60 Multistation was used for the laser scanner data collection. Multiple scans were combined by setting up the scanner using resection techniques coupled with Leica RTK - GPS equipment. All scan data are corrected using measurements of a reference mark with a known location.
Reliable estimates of the magnitude and frequency of floods are an important part of the framework for hydraulic-structure design and flood-plain management in Georgia, South Carolina, and North Carolina (study area). Annual peak flows measured at U.S. Geological Survey streamgages were used to compute at-site flood-frequency estimates at those streamgages in the study area based on annual peak-flows records through 2017. Flood-frequency estimates also are needed at ungaged stream locations. A process known as regionalization was used to develop regression equations to estimate the magnitude and frequency of floods at ungaged locations. This model archive provides the inputs and outputs for (1) the at-site flood-frequency...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alabama,
Florida,
Georgia,
Hydrology,
North Carolina,
|
|
