Filters: Tags: lidar (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
812 results (22ms)
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
This dataset is comprised of three files containing northing, easting, and elevation ("XYZ") information for light detection and ranging (LiDAR) data representing beach topography and sonar data representing near-shore bathymetry of Lake Superior at Minnesota Point, Duluth, Minnesota. The point data is the same as that in LAS (industry-standard binary format for storing large point clouds) files that were used to create a digital elevation model (DEM) of the approximately 5.9 square kilometer (2.3 square mile) surveyed area. LiDAR data were collected August 10, 2019 using a boat-mounted Optech ILRIS scanner and methodology similar to that described by Huizinga and Wagner (2019). Multi-beam sonar data were collected...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bathymetry and Elevation,
DEM,
Duluth,
Great Lakes,
Hydroacoustic,
This dataset consists of point cloud data collected in 2016 and 2017 of the lower and upper Scenic Drive landslide locations in La Honda, California. Point cloud data were collected in 2016 to establish baseline for movement detection of past landslides. Point cloud data were collected in 2017 adjacent and upslope of 2016 data to document a newly formed landslide. The data were collected with a Riegl VZ400 Terrestrial Laser Scanner and georeferenced using a Leica Viva GS15 survey grade GPS. The data are delivered as georeferenced (NAD83 UTM zone 10N ellipsoid) classified point clouds, 5 cm resolution digital elevation models, and a text file of surveyed GPS control points. The included files are: LH2017_Jan.laz...
Hillshade of lidar-derived, bare earth digital elevation model, with 235-degree azimuth and 20-degree sun angle, 0.25m resolution, depicting earthquake effects following the August 24, 2014 South Napa Earthquake.
Categories: Data;
Types: Citation,
Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: California,
Napa,
Napa County,
San Francisco Bay,
earthquake occurrences,
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data;
Tags: 3D Elevation Program,
3DEP,
American Society of Photogrammetry and Remote Sensing,
Base Maps,
Bathymetric,
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
|
|