Filters: System Type: Data Release (X) > Categories: NOT Data Release - In Progress (X) > Tags: {"scheme":"none"} (X) > partyWithName: Water Resources (X)
169 results (118ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tags (with Scheme=none) |
These data are bathymetry (river bottom elevation) in XYZ format, generated from the March 29-30, 2017 and April 13, 2017, bathymetric survey of the East Fork White River at Columbus, Indiana. The bathymetry was collected from approximately the confluence of Driftwood and Flatrock rivers, downstream to the confluence of Haw Creek. Hydrographic data were collected using an acoustic Doppler current profiler (ADCP) with integrated Differential Global Positioning System (DGPS). Data were collected as the surveying vessel traversed the river, approximately perpendicular to the velocity vectors at 55 cross sections which were spaced 200 feet apart along the river. Additional cross sections were collected upstream and...
Water quality and optical absorbance data for journal article entitled, "The removal kinetics of dissolved organic matter and the optical clarity of groundwater" by Francis H. Chapelle, Yuan Shen, Eric W. Strom, and Ronald Benner. Hydrogeology Journal. In Press.
Water surface elevations within seven Willamette River off-channel features (OCF; alcoves and side channels) were measured using submerged pressure transducers. Transducers were installed from late May through mid-October, 2016, when discharge of the Willamette River was between approximately 5,500 and 45,000 cubic feet per second at Salem, Oregon (USGS gage 14191000) and 3,500 to 17,500 cubic feet per second at Harrisburg, Oregon (USGS gage 14166000). Pressure transducer sensor depth was measured at all seven sites. For five of the sites, pressure transducer sensor depths were converted to water surface elevations by surveying the water surface at each transducer with a real-time kinematic global positioning system...
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Ecology,
Geomorphology,
Oregon,
RTK,
USGS Science Data Catalog (SDC),
Data pertaining to mapping the approximate inland extent of saltwater at the base of the Biscayne Aquifer in the Model Land Area of Miami-Dade County, Florida in 2016. The inland extent of saltwater at the base of the Biscayne aquifer in the Model Land area of Miami-Dade County, Florida, was last mapped in 2011. Since that time, the saltwater interface has continued to move inland. The interface is near several active well fields; therefore, an updated approximation of the inland extent of saltwater and an improved understanding of the rate of movement of the saltwater interface are necessary. A geographic information system was used to create a map using the data collected by the organizations that monitor water...
Categories: Data;
Tags: Biscayne aquifer,
Florida,
Miami-Dade County,
Model Land area,
USGS Science Data Catalog (SDC),
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in major rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay Nontidal Network (NTN) stations for the period 1985 through 2018. Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). The load results represent the total mass of nitrogen, phosphorus, and suspended sediment that was exported from each of the NTN watersheds. To determine the trend in loads, the annual load results are flow normalized to integrate out the year-to-year variability in river discharge....
Categories: Data,
Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay Watershed,
Delaware,
Maryland,
New York,
Pennsylvania,
A three-dimensional groundwater flow model using MODFLOW-NWT was developed to evaluate historical and potential stream capture in the lower Humboldt River Basin, Nevada. The Humboldt River Basin is the only river basin that is contained entirely within the state of Nevada. The effect of groundwater pumping on the Humboldt River is not well understood. Tools are needed to determine stream capture and manage groundwater pumping in the Humboldt River Basin. Previous work has demonstrated that the river’s surface-water resource is sensitive to groundwater withdrawals, which have steadily increased since the 1950s for agriculture, municipal, and mining uses. A numerical groundwater flow model was developed for the purpose...
Categories: Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Capture,
Groundwater Model,
Humboldt River Basin watershed,
Hydrology,
InlandWaters,
In 2012, catchments were generated in the Delaware River Basin for 8-digit HUCs in the areas underlain by the Marcellus Shale (all of 02040101, 02040102, 02040103, 02040104; and headwater areas of 02040106 and 02040203) based on the National Hydrography Dataset (NHD) Strahler first- and second-order streams. There were areas that did not have a catchment generated so another methodology needed to be used in an attempt to fill in the 'gap areas'. A 900-cell, flow accumulation raster generated for the Pennsylvania StreamStats application was used as a surrogate stream layer with the same Strahler ordering system applied to help fill in the 'gap areas'. Points were manually placed at the downstream end of the Strahler...
The U.S. Geological Survey (USGS), at the request of the U.S. Army Environmental Command (USAEC), evaluated the capabilities of two borehole technologies to measure horizontal groundwater velocity and direction of flow in a parallel-plate fractured-rock simulator. A colloidal borescope flowmeter (HB) and a heat-pulse flowmeter (HH) were deployed in 4-inch and 6-inch inner-diameter simulated uncased wells that spanned 0.39- and 1.0-inch apertures with simulated groundwater velocities ranging from 2 to 958 feet per day. Measurements were made at the USGS Hydrologic Instrumentation Facility in the Hydraulics Laboratory and the Indianapolis office of the USGS Ohio-Kentucky-Indiana Water Science Center. Ten measurements...
The temperature and surface geophysical data contained in this release have primarily been collected to support groundwater/surface water methods development, and to characterize the hydrogeological controls on native brook trout habitat. All data have been collected since 2010 along the Quashnet River corridor located on Cape Cod, MA, USA. Cape Cod is a peninsula in southeastern coastal Massachusetts, USA, composed primarily of highly permeable unconsolidated glacial moraine and outwash deposits. The largest of the Cape Cod sole-source aquifers occupies a western (landward) section of the peninsula, and is incised by several linear valleys that drain groundwater south to the Atlantic Ocean via baseflow-dominated...
Categories: Data Release - Revised;
Tags: Falmouth/Mashpee,
Groundwater,
InlandWaters,
Massachusetts,
Quashnet River,
An existing, three-dimensional, transient groundwater-flow model of the Upper Charles River Basin, eastern Massachusetts, was modified to evaluate alternative groundwater-withdrawal scenarios on water levels in Kingsbury Pond. The pond is hydraulically connected to the groundwater-flow system, and water levels in the pond fluctuate in response to recharge to the aquifer from precipitation and wastewater return flows through septic systems, to withdrawals from the aquifer at nearby wells, and to precipitation directly on the pond surface. Concerns about the effects of groundwater withdrawals on water levels in the pond prompted an investigation by the U.S. Geological Survey (USGS) in cooperation with the Massachusetts...
A new groundwater flow model for western Chippewa County, Wisconsin has been developed by the Wisconsin Geological and Natural History Survey (WGNHS) and the U.S. Geological Survey (USGS). An analytic element GFLOW model was constructed and calibrated to generate hydraulic boundary conditions for the perimeter of the more detailed three-dimensional MODFLOW-NWT model. This three-dimensional model uses the USGS MODFLOW-NWT finite difference code, a standalone version of MODFLOW-2005 that incorporates the Newton (NWT) solver. The model conceptualizes the hydrogeology of western Chippewa County as a six-layer system which includes several hydrostratigraphic units. The model explicitly simulates groundwater-surface-water...
A previously published MODFLOW-NWT groundwater-flow model for the Rush Springs aquifer in western Oklahoma (using 1 steady state stress period followed by 444 monthly stress periods representing 1979-2015; Ellis, 2018a) was used as the basis of several groundwater-use scenarios. The model is a 3-layer model including the Cloud Chief formation (confining unit of the Rush Springs aquifer), alluvial and terrace deposits, and the Rush Springs aquifer. The scenarios were used to assess the effects of increasing groundwater withdrawals from the Rush Springs aquifer on base flows to streams that flow into Fort Cobb Reservoir to address concerns over groundwater use reducing inflows to the lake. The effects of groundwater...
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington (https://pubs.er.usgs.gov/publication/wri964147). In 2016, a regional groundwater flow model for the greater Kitsap Peninsula was developed (https://pubs.er.usgs.gov/publication/sir20165052). Using information from the 2016 regional model, the 1997 groundwater flow model for the Puget Sound Naval Shipyard was updated with a new interpretation of the underlying hydrogeologic units, a refined model grid, and improved recharge estimates. A steady-state model version was constructed in MODFLOW-NWT to simulate equilibrium conditions. MODPATH forward...
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay Nontidal Network (NTN) stations for the period 1985 through 2018 Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). A recently published extension of WRTDS allows users to separate these estimates into high- and low-flow conditions. This data release contains (1) a table of daily high- and low-flow concentration and load estimates for NTN stations between 1985 - 2018 and (2) an R file that contains...
Categories: Data,
Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay Watershed,
Delaware,
Maryland,
New York,
Pennsylvania,
A three-dimensional groundwater flow model, MODFLOW-OWHM, was developed to provide a better understanding of the hydrogeology of the Lucerne Valley Groundwater Basin, California. The model was used to investigate the historical groundwater storage loss and subsidence associated with anthropogenic groundwater demands. The model was calibrated to 1942 through 2016 conditions. This USGS data release contains all of the input and output files for the simulation described in the associated model documentation report https://doi.org/10.3133/sir20225048
The Rio Grande Transboundary Integrated Hydrologic Model (RGTIHM), which was originally developed by Hanson and others (2020) (https://doi.org/10.3133/sir20195120), was updated and recalibrated to minimize the biases in RGTIHM’s simulation of streamflow and to incorporate new estimates of historical agricultural consumptive use in the study area. The RGTIHM was developed through an interagency effort between the U.S. Geological Survey (USGS) and the Bureau of Reclamation (Reclamation) to provide a tool for analyzing the hydrologic system response to the historical (March 1940 through 2014) evolution of water use and potential changes in water supplies and demands in the Hatch Valley (also known as Rincon Valley...
Benthic diatom assemblages are known to be indicative of water quality but have yet to be widely adopted in biological assessments in the United States due to several limitations. Our goal was to address some of these limitations by developing regional multi-metric indices (MMIs) that are robust to inter-laboratory taxonomic inconsistency, adjusted for natural covariates, and sensitive to a wide range of anthropogenic stressors. We aggregated bioassessment data from two national-scale federal programs and used a data-driven analysis in which all-possible combinations of 2-7 metrics were compared for three measures of performance. The datasets in this release support the Carlisle, et al. 2022 report cited herein....
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Aquatic Biology,
Ecology,
USGS Science Data Catalog (SDC),
Water Quality,
algae,
Daily lake surface temperatures estimates for 185,549 lakes across the contiguous United States from 1980 to 2020 generated using an entity-aware long short-term memory deep learning model. In-situ measurements used for model training and evaluation are from 12,227 lakes and are included as well as daily meteorological conditions and lake properties. Median per-lake estimated error found through cross validation on lakes with in-situ surface temperature observations was 1.24 °C. The generated dataset will be beneficial for a wide range of applications including estimations of thermal habitats and the impacts of climate change on inland lakes.
A three-dimensional groundwater flow model (MODFLOW-NWT) of the Columbia Plateau Regional aquifer (CPRAS) in Washington, Oregon, and Idaho was developed to provide an integrated understanding of the hydrologic system to implement effective water-resource management strategies. The U.S. Geological Survey (USGS) Groundwater Resources Program assessed the groundwater availability as part of a national study of regional systems (https://pubs.usgs.gov/circ/1323/). The CPRAS assessment includes the status of groundwater resources, how these resources have changed over time, and development and application of tools to estimate system responses to stresses from future uses and climate variability and change. A major product...
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system near Puget Sound, Pierce and King Counties, Washington. A steady-state model version was constructed to simulate equilibrium conditions, while a transient model version was constructed to simulate monthly variability from January 2005 to December 2015. The model was used to simulate several hydrologic scenarios. This data release contains the input and output files for the simulations described in the associated model documentation report (https://doi.org/10.3133/sir20XXXXXX).
|
|
