Skip to main content
Advanced Search

Filters: Tags: {"scheme":"ISO 19115 Topic Category"} (X) > partyWithName: PCMSC Science Data Coordinator (X) > partyWithName: Natural Hazards (X)

375 results (58ms)   

View Results as: JSON ATOM CSV
thumbnail
Time series data of water surface elevation and wave height were acquired at ten locations for 517 days (in three separate deployments) off the north coast of Roi-Namur Island, Kwajalein Atoll, Marshall Islands, in support of a study on the coastal circulation patterns and the transformation of surface waves over the coral reefs. The relative placement of sensors on the reefs were as follows: ROI13W1 and ROI13E1 – fore reef ROI13W2 and ROI13E2 – outer reef flat ROI13W1 and ROI13E1 – middle reef flat ROI13W1 and ROI13E1 – inner reef flat
thumbnail
This portion of the data release presents the raw aerial imagery collected during the unmanned aerial system (UAS) survey of the intertidal zone at West Whidbey Island, WA, on 2019-06-04. The imagery was acquired using a Department of Interior-owned 3DR Solo quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. Flights using both a nadir camera orientation and an oblique camera orientation were conducted. For the nadir flights (F04, F05, F06, F07, and F08), the camera was mounted using a fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. The UAS was flown on pre-programmed autonomous flight lines at an approximate altitude of 70 meters above ground...
thumbnail
This portion of the data release presents a digital surface model (DSM) and hillshade image of the intertidal zone at West Whidbey Island, WA. The DSM has a resolution of 4 centimeters per pixel and was derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-04. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The raw imagery used to create the DSM was acquired using a UAS fitted with a Ricoh GR II...
thumbnail
High-resolution topographic surveys were conducted at two pools on the Carmel River between 2014 and 2019 using a survey-grade total station. The Dam Reach pool (DMPOOL) is located within the Dam Reach, approximately 450 meters downstream of the former site of the San Clemente Dam. The Sleepy Hollow pool (SHPOOL) is located within the Sleepy Hollow reach, approximately 2.25 kilometers downstream of the former site of the San Clemente Dam. Both pools were surveyed in 2014, 2015, 2016, 2017, and 2019 using a total station, in conjunction with the channel cross-section surveys also conducted as part of this study (see accompanying file within this data release for topographic survey transect data). For the 2015 survey,...
thumbnail
This data release supersedes version 1, published in 2017 under https://doi.org/10.5066/F74M93HF. Please see Version_History_P9HG8UDS.txt below for more information. This dataset contains the easting, northing, and elevation values of the river-right and river-left transect endpoint reference benchmarks (RBM and LBM) from survey transects at 10 survey reaches along the Carmel River, central California. Topographic surveys were completed on these transects during eight summer surveys (in 2013, 2014, 2015, 2016, 2017, 2019, 2020 and 2021). See accompanying file within this data release for elevation measurements. All data were collected in NAD83 UTM10N horizontal coordinates and NAVD88 Geoid 12B vertical coordinates,...
thumbnail
This dataset consists of physics-based Delft3D model and Delwaq model input files used in modeling sediment deposition and concentrations around the coral reefs of west Maui, Hawaii. The Delft3D models were used to simulate waves and currents under small (SC1) and large (‘SC2’) wave conditions for current stream discharge (‘Alt1’) and stream discharge with watershed restoration (‘Alt3’). Delft3D model results were subsequently used as forcing conditions for Delwaq models to simulate sediment transport and dispersion. The Delwaq models were used to simulate sediment transport and concentrations under the same two wave and stream discharge scenarios. The Delwaq models were run using forcing conditions generated by...
thumbnail
RBRduo pressure and temperature sensors, mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Skagit and Bellingham Bays, Washington, USA, from December 2017 to February 2018, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
thumbnail
Water depth, turbidity, and current velocity time-series data were collected in Liberty Island Conservation Bank (WVA) in 2017. The turbidity sensors were not calibrated to suspended-sediment concentration at this location. Typically, each zip folder for a deployment period contains two data files from a velocimeter and one data file from a CTD, each of which include data from an optical backscatter sensor. --------- Data were collected from several sites in Little Holland Tract (LHT) and Liberty Island (LI), including the Liberty Island Conservation Bank (LICB), from 2015 to 2017. Table 1 (below) lists the deployment name (DLXXX) and dates for each sampling station location. Station names starting with ‘H’ are...
thumbnail
Water depth, turbidity, and current velocity time-series data were collected in Liberty Island from 2015 to 2017. Depth (from pressure) and velocity were measured in high-frequency (8 Hz) bursts. Burst means represent tidal stage and currents, and burst data can be used to determine wave height, period, and direction, and wave-orbital velocity. The turbidity sensors were calibrated to suspended-sediment concentration measured in water samples collected on site. The calibration and fit parameters for all of the turbidity sensors used in the study are tabulated and provided with the data. Data were sequentially added to this data release as they were collected and post-processed. Typically, each zip folder...
thumbnail
Conductivity-Temperature-Depth (CTD) profile data were collected along transects and across study areas of west Hawaii Island between 2010 and 2014. Measurements were made over a range of tide and weather conditions and help characterize the spatial extent and variability in estuarine conditions across the reef when grouped by 1 to 2-hour survey period or by season.
thumbnail
Spatial measurements of water temperature, specific conductance, salinity, pH, and dissolved oxygen between 0.25 and 0.50 m water depth were collected every 10-seconds along and across shore at 12 principal study areas along west Hawaii Island. Measurements were made between 2010 and 2013 during different seasons and tide states over the course of 1.0 to 2.5 hours to evaluate the spatial and temporal extent of water properties that influence coral reef health and coral reef habitat availability.
thumbnail
Time-series data of water level, water temperature, and salinity were collected at 10 locations along west Hawaii Island between 2010 and 2011 in nearshore coral reef settings. Conductivity-temperature-depth sensors were attached to fossil limestone, rock, or dead coral within otherwise healthy coral reef settings spanning water depths of 8 to 23 ft. Continuous measurements were made every 10 or 20 minutes.
thumbnail
This part of the data release presents projected flooding extent polygon (flood masks) shapefiles based on wave-driven total water levels for Commonwealth of Puerto Rico. There are eight associated flood mask and flood depth shapefiles: one for each of four nearshore wave energy return periods (rp; 10-, 50-, 100-, and 500-years), the pre-storm scenario (base) and the post-storm scenarios.
thumbnail
Chirp data were collected by the U.S. Geological Survey in September of 2013 in Port Valdez, Alaska. Data were collected aboard the USGS R/V Alaskan Gyre during field activity G-01-13-GA, using an EdgeTech SB-512i sub-bottom profiler. Sub-bottom acoustic penetration spans several tens of meters and is variable by location.
thumbnail
High-resolution single-channel Chirp and minisparker seismic-reflection data were collected by the U.S. Geological Survey in September and October 2006, offshore Bolinas to San Francisco, California. Data were collected aboard the R/V Lakota, during field activity L-1-06-SF. Chirp data were collected using an EdgeTech 512 chirp subbottom system and were recorded with a Triton SB-Logger. Minisparker data were collected using a SIG 2-mille minisparker sound source combined with a single-channel streamer, and both were recorded with a Triton SB-Logger.
thumbnail
Geochemical analyses of authigenic carbonates, bivalves, and pore fluids were performed on samples collected from seep fields along the Queen Charlotte Fault, a right lateral transform boundary that separates the Pacific and North American tectonic plates. Samples were collected using grab samplers and piston cores, and were collected during three different research cruises in 2011, 2015, and 2017.
thumbnail
This portion of the data release presents a digital surface model (DSM) and hillshade of the Liberty Island Conservation Bank Wildlands restoration site in the Sacramento-San Joaquin Delta. The DSM has a resolution of 10 centimeters per-pixel and was derived from structure-from-motion (SfM) processing of aerial imagery collected with an Unmanned Aerial System (UAS) on 2018-10-23. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The raw imagery used to create this DSM was...
thumbnail
This portion of the data release presents the raw aerial imagery collected during the Unmanned Aerial System (UAS) survey of the Liberty Island Conservation Bank Wildlands restoration site in the Sacramento-San Joaquin Delta on 2018-10-23. The imagery was acquired using two Department of Interior owned 3DR Solo quadcopters fitted with Ricoh GR II digital cameras featuring global shutters. The cameras were mounted using a fixed mount on the bottom of the UAS and oriented in a roughly nadir orientation. The UAS were flown on pre-programmed autonomous flight lines at an approximate altitude of 120 meters above-ground-level, resulting in a nominal ground-sample-distance (GSD) of 3.2 centimeters per-pixel. The flight...
thumbnail
Bathymetric change grids covering the periods of time from 1934 to 2011, from 2011 to 2018, and from 1934 to 2018 are presented. The grids cover a portion of the Mokelumne River, California, starting at its terminus at the San Joaquin River and moving upriver to the confluences of the north and south branches of the Mokelumne. Positive grid values indicate accretion, or a shallowing of the surface bathymetric surface, and negative grid values indicate erosion, or a deepening of the bathymetric surface. Bathymetry data sources include the U.S. Geological Survey, California Department of Water Resources, and NOAA's National Ocean Service.


map background search result map search result map Swell-filtered, high-resolution seismic-reflection data collected between Shelter Cove and Fort Bragg (northern Califrnia) during field activity B-5-10-NC from 09/20/2010 to 10/01/2010 Surface-water temperature, salinity, Ph, and dissolved oxygen data from nearshore coral reef locations along the west coast of Hawaii Island (2010-2013) Water level, temperature, and salinity time-series data from nearshore coral reef locations along the west coast of Hawaii Island (2010-2011) Water-level, wind-wave, velocity, and suspended-sediment concentration (SSC) time-series data from Liberty Island Conservation Bank (station WVA), Sacramento-San Joaquin Delta, California, 2017 Water-level, wind-wave, velocity, and suspended-sediment concentration (SSC) time-series data from Liberty Island (station LVB), Sacramento-San Joaquin Delta, California, 2015-2017 (ver. 2.0, September, 2019) Bathymetric change analyses of the southernmost portion of the Mokelumne River, California, from 1934 to 2018 Geochemical analysis of seeps along the Queen Charlotte Fault Conductivity, temperature, and depth (CTD) data from nearshore coral reef locations along the west coast of Hawaii Island (2010-2014) Chirp and minisparker seismic-reflection data of field activity L-1-06-SF collected offshore Bolinas to San Francisco, California from 2006-09-25 to 2006-10-03 Wave observations from nearshore bottom-mounted pressure sensors in Skagit and Bellingham Bays, Washington, USA from Dec 2017 to Feb 2018 Roi-Namur Island, Marshall Islands, wave and water level data, 2013-2015 Chirp seismic-reflection data from USGS field activity G-01-13-GA collected in Port Valdez, Alaska, in September 2013 Digital surface model (DSM) for the Liberty Island Conservation Bank Wildlands restoration site, Sacramento-San Joaquin Delta, California, 2018-10-23 Aerial imagery from UAS survey of the Liberty Island Conservation Bank Wildlands restoration site, Sacramento-San Joaquin Delta, California, 2018-10-23 Digital surface model (DSM) for the intertidal zone at West Whidbey Island, WA, 2019-06-04 Aerial imagery from UAS survey of the intertidal zone at West Whidbey Island, WA, 2019-06-04 Projected flooding extents and depths based on 10-, 50-, 100-, and 500-year wave-energy return periods for the Commonwealth of Puerto Rico before and after Hurricanes Irma and Maria due to the storms' damage to the coral reefs Topographic survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) High resolution topography for two pools on the Carmel River, central California, 2014 to 2019 Model parameter input files to compare effects of stream discharge scenarios on sediment deposition and concentrations around coral reefs off west Maui, Hawaii Water-level, wind-wave, velocity, and suspended-sediment concentration (SSC) time-series data from Liberty Island Conservation Bank (station WVA), Sacramento-San Joaquin Delta, California, 2017 High resolution topography for two pools on the Carmel River, central California, 2014 to 2019 Aerial imagery from UAS survey of the Liberty Island Conservation Bank Wildlands restoration site, Sacramento-San Joaquin Delta, California, 2018-10-23 Aerial imagery from UAS survey of the intertidal zone at West Whidbey Island, WA, 2019-06-04 Digital surface model (DSM) for the intertidal zone at West Whidbey Island, WA, 2019-06-04 Roi-Namur Island, Marshall Islands, wave and water level data, 2013-2015 Digital surface model (DSM) for the Liberty Island Conservation Bank Wildlands restoration site, Sacramento-San Joaquin Delta, California, 2018-10-23 Bathymetric change analyses of the southernmost portion of the Mokelumne River, California, from 1934 to 2018 Water-level, wind-wave, velocity, and suspended-sediment concentration (SSC) time-series data from Liberty Island (station LVB), Sacramento-San Joaquin Delta, California, 2015-2017 (ver. 2.0, September, 2019) Model parameter input files to compare effects of stream discharge scenarios on sediment deposition and concentrations around coral reefs off west Maui, Hawaii Topographic survey transect endpoint coordinates along the Carmel River, central California, 2013 to 2021 (ver. 2.0, March 2022) Water level, temperature, and salinity time-series data from nearshore coral reef locations along the west coast of Hawaii Island (2010-2011) Chirp and minisparker seismic-reflection data of field activity L-1-06-SF collected offshore Bolinas to San Francisco, California from 2006-09-25 to 2006-10-03 Geochemical analysis of seeps along the Queen Charlotte Fault