Filters: Tags: {"scheme":"None"} (X) > partyWithName: Desert Research Institute (X)
12 results (365ms)
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tags (with Scheme=None) |
This raster depicts the percentage of lithological the hydraulic conductivity (in micrometers per second) of surface or near surface geology. We derived these rasters by calculating the average conductivity for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geology,
Geophysical,
hydraulic conductivity
In the southwestern US, the meteorological phenomenon known as atmospheric rivers (ARs) has gained increasing attention due to its strong connections to floods, snowpacks and water supplies in the West Coast states. Relatively less is known about the ecological implications of ARs, particularly in the interior Southwest, where AR storms are less common. To address this gap, we compared a chronology of AR landfalls on the west coast between 1989-2011 and between 25-42.5ºN, to annual metrics of the Normalized Difference Vegetation Index (NDVI; an indicator of vegetation productivity) and daily-resolution precipitation data to assess influences of AR-fed winter precipitation on vegetation productivity across the southwestern...
Categories: Data;
Tags: Arizona,
California,
Climatology,
Drought, Fire and Extreme Weather,
Extreme Weather,
This raster depicts the percentage of lithological magnesium oxide (MgO) content in surface or near surface geology. We derived these rasters by calculating the average percent MgO content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
Magnesium,
This raster depicts the percentage of lithological the compressive strength, measured as uniaxial compressive strength (in megaPascals, MPa) of surface or near surface geology. We derived these rasters by calculating the average strength for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geology,
Geophysical,
Rock Strength,
This raster depicts the percentage of lithological aluminum oxide (Al2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Al2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Al2O3,
Aluminium,
Bedrock,
Conterminous U.S.,
Geochemistry,
This raster depicts the percentage of lithological sulfur (S) content in surface or near surface geology. We derived these rasters by calculating the average percent S content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from Soller et al....
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
sulfur
This raster depicts the percentage of lithological nitrogen (N) content in surface or near surface geology. We derived these rasters by calculating the average percent N content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from Soller et...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
nitrogen
This raster depicts the percentage of lithological phosphorus pentoxide (P2O5) content in surface or near surface geology. We derived these rasters by calculating the average percent P2O5 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
P2O5,
These data describe the water year (October-September) precipitation and summer (JJA) NDVI for the riparian areas along four creeks on the Silvies Valley Ranch. Each of these creeks had a series of rock checkdams installed between 2006 and 2011 to stop incision and raise the mean water level. Data in this file are used to examine the relationship between water year precipiation and summer NDVI in these watersheds and how that relationship may have changed with the installation of the dams.
Categories: Data;
Tags: Data Visualization & Tools,
Flat Creek,
Grant County,
Jack Andy Creek,
Landsat images,
This raster depicts the percentage of lithological silicon dioxide (SiO2) content in surface or near surface geology. We derived these rasters by calculating the average percent SiO2 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
SiO2,
This raster depicts the percentage of lithological sodium oxide (Na2O) content in surface or near surface geology. We derived these rasters by calculating the average percent Na2O content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
Na2O,
This raster depicts the percentage of lithological ferric oxide (Fe2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Fe2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Fe2O3,
Geochemistry,
Geology,
|
![]() |