Skip to main content
Advanced Search

Filters: Tags: {"type":"Place"} (X) > Types: Map Service (X)

40,270 results (72ms)   

Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Schemes
Tags (with Type=Place )
View Results as: JSON ATOM CSV
thumbnail
This dataset represents an update to U.S. Geological Survey Data Series 597. Locations and attributes of wind turbines in Colorado, 2009 (available at http://pubs.usgs.gov/ds/597/). This updated Colorado wind turbine Data Series provides geospatial data (fig. 1) for all 1,204 wind turbines established within the State of Colorado as of September 2011, an increase of 297 wind turbines from 2009.Attributes specific to each turbine include: turbine location, manufacturer and model, rotor diameter, hub height, rotor height, potential megawatt output, land ownership, county, and development status of the wind turbine. Wind energy facility data for each turbine include: facility name, facility power capacity, number of...
thumbnail
Hillshade of lidar-derived, bare earth digital elevation model, with 235-degree azimuth and 20-degree sun angle, 0.25m resolution, depicting earthquake effects following the August 24, 2014 South Napa Earthquake.
thumbnail
High resolution bathymetric, sea-floor backscatter, and seismic-reflection data were collected offshore of southeastern Louisiana aboard the research vessel Point Sur on May 19-26, 2017, in an effort to characterize mudflow hazards on the Mississippi River Delta front. As the initial field program of a research cooperative between the U.S. Geological Survey, the Bureau of Ocean Energy Management, and other Federal and academic partners, the primary objective of this cruise was to assess the suitability of sea-floor mapping and shallow subsurface imaging tools in the challenging environmental conditions found across delta fronts (for example, variably distributed water column stratification and widespread biogenic...
thumbnail
Future climates are simulated by general circulation models (GCM) using climate change scenarios (IPCC 2014). To project climate change for the sagebrush biome, we used 11 GCMs and two climate change scenarios from the IPCC Fifth Assessment, representative concentration pathways (RCPs) 4.5 and 8.5 (Moss et al. 2010, Van Vuuren et al. 2011). RCP4.5 scenario represents a future where climate policies limit and achieve stabilization of greenhouse gas concentrations to 4.5 W m-2 by 2100. RCP8.5 scenario might be called a business-as-usual scenario, where high emissions of greenhouse gases continue in the absence of climate change policies. The two selected time frames allow comparison of near-term (2020-2050) and longer-term...
thumbnail
Future climates are simulated by general circulation models (GCM) using climate change scenarios (IPCC 2014). To project climate change for the sagebrush biome, we used 11 GCMs and two climate change scenarios from the IPCC Fifth Assessment, representative concentration pathways (RCPs) 4.5 and 8.5 (Moss et al. 2010, Van Vuuren et al. 2011). RCP4.5 scenario represents a future where climate policies limit and achieve stabilization of greenhouse gas concentrations to 4.5 W m-2 by 2100. RCP8.5 scenario might be called a business-as-usual scenario, where high emissions of greenhouse gases continue in the absence of climate change policies. The two selected time frames allow comparison of near-term (2020-2050) and longer-term...
thumbnail
Future climates are simulated by general circulation models (GCM) using climate change scenarios (IPCC 2014). To project climate change for the sagebrush biome, we used 11 GCMs and two climate change scenarios from the IPCC Fifth Assessment, representative concentration pathways (RCPs) 4.5 and 8.5 (Moss et al. 2010, Van Vuuren et al. 2011). RCP4.5 scenario represents a future where climate policies limit and achieve stabilization of greenhouse gas concentrations to 4.5 W m-2 by 2100. RCP8.5 scenario might be called a business-as-usual scenario, where high emissions of greenhouse gases continue in the absence of climate change policies. The two selected time frames allow comparison of near-term (2020-2050) and longer-term...
thumbnail
This shapefile contains landscape factors representing human disturbances summarized to local and network catchments of river reaches for the state of South Dakota. This dataset is the result of clipping the feature class 'NFHAP 2010 HCI Scores and Human Disturbance Data for the Conterminous United States linked to NHDPLUSV1.gdb' to the state boundary of South Dakota. Landscape factors include land uses, population density, roads, dams, mines, and point-source pollution sites. The source datasets that were compiled and attributed to catchments were identified as being: (1) meaningful for assessing fish habitat; (2) consistent across the entire study area in the way that they were assembled; (3) representative of...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
thumbnail
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...


map background search result map search result map South Dakota: NFHAP 2010 HCI Scores and Disturbances Wind Turbines in Colorado, 2011 Hillshade raster (235-degree azimuth, 20-degree sun angle) derived from lidar data collected after the August 24, 2014 South Napa earthquake Temperature (Mean: Apr - June) - 2020-2050 - RCP8.5 - Mean Temperature (Mean: Dec - Mar) - 2070-2100 - RCP8.5 - Min Temperature (Minimum: January) - 2070-2100 - RCP8.5 - Mean Multibeam Echosounder, Reson T-20P tracklines, USGS field activity 2017-003-FA, Mississippi River Delta front offshore of southeastern Louisiana (Esri polyline shapefile, GCS WGS 84) Geomorphometry for Hydrologic Unit 0205030503 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030308 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030405 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205020608 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030401 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205010402 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205010107 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030106 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 02040203_l (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 02040105_l (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0204010501 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0204010505 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0207000507 (FACET version 0.1.0) Multibeam Echosounder, Reson T-20P tracklines, USGS field activity 2017-003-FA, Mississippi River Delta front offshore of southeastern Louisiana (Esri polyline shapefile, GCS WGS 84) Wind Turbines in Colorado, 2011 South Dakota: NFHAP 2010 HCI Scores and Disturbances Geomorphometry for Hydrologic Unit 0205030503 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030308 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030405 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205020608 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030401 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205010402 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205010107 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0205030106 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 02040203_l (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 02040105_l (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0204010501 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0204010505 (FACET version 0.1.0) Geomorphometry for Hydrologic Unit 0207000507 (FACET version 0.1.0) Temperature (Mean: Apr - June) - 2020-2050 - RCP8.5 - Mean Temperature (Mean: Dec - Mar) - 2070-2100 - RCP8.5 - Min Temperature (Minimum: January) - 2070-2100 - RCP8.5 - Mean