Filters: Tags: {"type":"Place"} (X) > partyWithName: PCMSC Science Data Coordinator (X)
605 results (15ms)
Filters
Date Range
Extensions Types Contacts
Categories Tag Schemes
|
Fine-grained sediment was collected from the banks of Napa River, Sonoma Creek, and tributaries in March 2018 and from shallow nearshore areas of the northern reach of San Francisco Bay in April 2018. Bulk sediment was dated using activities of short-lived cosmogenic radionuclides (beryllium-7, cesium-137, and lead-210). Contents of potentially toxic metals and source-rock-indicative elements, including rare earth elements, were quantified in the fine fraction of sediment (particles less than 0.063 mm diameter). Ratios of stable carbon-13/carbon-12 isotopes and total carbon to total nitrogen were determined in sedimentary organic matter.
Categories: Data;
Tags: Bedrock geochemistry,
CMHRP,
Carquinez Straight,
Coastal and Marine Hazards and Resources Program,
Environmental Health,
This data table includes in-situ near-shore seawater measurements of excess radon (Rn-222) and water levels collected in Faga'alu Bay, Tutuila, American Samoa.
Categories: Data;
Tags: CMHRP,
Coastal and Marine Hazards and Resources Program,
Faga'alu Bay,
Faga’alu,
Oceans,
Thermokarst lake water temperature and salinity data were collected in 2011 in the vicinity of Arey Lagoon and Barter Island, Alaska. Pond temperatures and salinity (conductivity) were measured along two transects traversing across a wet sedge area. A hand-held YSI 556 MPS (plus or minus 0.5 percent accuracy) with a cable-attached instrument probe was placed in 10-15 cm of water within 1 m of each of the pond edges and allowed to equilibrate, and readings were recorded manually. In all, 35 ponds were sampled over a distance of approximately 1.5 km.
Categories: Data;
Tags: Arctic National Wildlife Refuge,
Arctic Ocean,
Arey Island,
Arey Lagoon,
Barter Island,
Ferromanganese crust samples were collected via dredge during four oceanographic research cruises to the western equatorial Pacific Ocean. The location (latitude, longitude, depth) and concentrations of 27 major and trace elements in the most recent growth layers of ferromanganese crusts from 57 dredge sites are presented here, as well as select seawater chemistry at each location. These data were used in statistical analyses to determine how oceanographic conditions affect the chemical composition of ferromanganese crusts throughout the region. The changes in ferromanganese crust composition show that modern measurements of these primary oceanographic parameters, as well as paleoceanographic reconstructions, can...
Categories: Data;
Tags: Assessments,
Baker Island,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Geochemistry,
This portion of the data release presents topographic point clouds of the intertidal zone at Puget Creek and Dickman Mill Park, Tacoma, WA, derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-03. The point clouds for Puget Creek and Dickman Mill Park contain 74,565,548 and 122,791,637 points, respectively, at an approximate point spacing of 1 point every 2 centimeters. Each point contains an explicit horizontal and vertical coordinate, color, intensity, and classification. Water portions of the point cloud were classified using a polygon digitized from the orthomosaic imagery derived from these surveys (also available in this data release)....
This data release provides seafloor-characteristics point data across the Gulf of Alaska, as digitized directly from National Oceanic and Atmospheric Administration (NOAA) National Ocean Service (NOS) smooth sheets published from 1892 to 2001, and archived at the National Geophysics Data Center (NGDC). Geo-rectification and digitization methods were adapted from Zimmermann and Benson (2013). Each location includes information for the smooth sheet number (H#####), a unique site number location, latitude, longitude, collection date, seafloor notation, and the translation of the notation. Unique site numbers were assigned randomly to each notation on a smooth sheet, starting at “_0”. Examples of seafloor notations...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Alaska,
CMGP,
Coastal and Marine Geology Program,
Gulf of Alaska,
Marine Habitat,
This table lists the NOS smooth sheets included in the associated shapefile (GulfofAlaskaDigitizationProject_NOSSeafloorCharacter.zip; N = 329, plus insets), the number of samples for each smooth sheet, the year of collection (1892 to 2001), and the smooth sheet scale (from 1:2,000 to 1:600,000). Smooth sheets are available through the National Geophysics Data Center’s online data portal (NDGC, http://www.ngdc.noaa.gov).
Categories: Data;
Tags: Alaska,
CMGP,
Coastal and Marine Geology Program,
Gulf of Alaska,
Marine Habitat,
This part of DS 781 presents data for the depth-to-transition map of the Point Sur to Point Arguello, California, region. The raster data file is included in the “DepthToTransition_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Water depths determined from bathymetry data were added to the sediment thickness...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
This part of DS 781 presents data for the sediment-thickness map of the Point Sur to Point Arguello, California, region. The raster data file is included in the “SedimentThickness_PointSurToPointArguello.zip,” which is accessible from https://doi.org/10.5066/P97CZ0T7. As part of the USGS's California State Waters Mapping Project, a 50-m grid of sediment thickness for the seafloor within the 3-nautical mile limit between Point Sur and Point Arguello was generated from seismic-reflection data collected between 2008 and 2014, and supplemented with geologic structure (fault and fold) information following the methodology of Wong (2012). Reference Cited: Wong, F. L., Phillips, E.L., Johnson, S.Y., and Sliter, R.W.,...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Avila Beach,
CMHRP,
Cambria,
Coastal and Marine Hazards and Resources Program,
Distributions,
This portion of the data release presents digital surface models (DSM) of the ocean beach at Fort Stevens State Park, OR, and Benson Beach at Cape Disappointment State Park, WA. The DSMs have resolutions of 10 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with unoccupied aerial systems (UAS) during low tides on 7 and 8 August 2017. Unlike a digital elevation model (DEM), the DSMs represent the elevation of the highest object within the bounds of a cell. Vegetation, buildings, and other objects have not been removed from the data. The raw imagery used to create the DSMs was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global...
Categories: Data;
Tags: Bathymetry and Elevation,
Benson Beach,
CHMRP,
Cape Disappointment,
Clatsop County,
In 2015 the U.S. Geological Survey, Pacific Coastal and Marine Science Center, in cooperation with the Alaska Department of Fish and Game (ADFG), collected bathymetry and acoustic-backscatter data near Cross Sound in southeast Alaska using a Reson 7111 multibeam echosounder mounded to the ADFG R/V Solstice. This section of the data release provides the bathymetry data as a GeoTIFF at 10-m spatial resolution. All files have accompanying FGDC metadata.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Bathymetry,
Bathymetry and Elevation,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Cross Sound,
This portion of the data release presents the raw aerial imagery collected during an Unmanned Aerial System (UAS) survey of the intertidal zone at Post Point, Bellingham Bay, WA, on 2019-06-06. The imagery was acquired using a Department of Interior-owned 3DR Solo quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. The camera was mounted using a fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. The UAS was flown on pre-programmed autonomous flight lines which were oriented roughly shore-parallel and were spaced to provide approximately 70 percent overlap between images from adjacent lines. Three flights (F01, F02, F03) covering the survey area were...
This part of the data release presents bathymetry data from the Elwha River delta collected in July 2017 using a kayak. The kayak was equipped with a single-beam echosounder and a survey-grade global navigation satellite system (GNSS) receiver.
This portion of the USGS data release presents bathymetry data collected during surveys performed in Floras Lake, Oregon in June 2018 (USGS Field Activity Number 2018-636-FA). Floras Lake is a coastal lake in southern Oregon that is separated from the Pacific Ocean by sand dunes. It is not influenced by tides, although water levels fluctuate seasonally. Lake bed bathymetry data were collected using two personal watercraft (PWCs) equipped with single-beam sonar systems and global navigation satellite system (GNSS) receivers. The sonar systems consisted of an Odom Echotrac CV-100 single-beam echosounder and 200 kHz transducer with a 9-degree beam angle. Depths from the lakebed to the echosounder were calculated using...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bathymetry and Elevation,
CMHRP,
Cape Blanco,
Coastal and Marine Hazards and Resources Program,
Curry County,
This portion of the USGS data release presents acoustic-backscatter data collected during surveys performed in Floras Lake, Oregon in June 2018 (USGS Field Activity Number 2018-636-FA). Lake bed backscatter data were collected using a personal watercraft (PWC) equipped with a sidescan sonar system and global navigation satellite system (GNSS) receivers. The sonar system consisted of a Tritech Starfish 990F with a 1-MHz transducer and a 0.3-degree horizontal beam width. Output from the GNSS receivers and sonar system were combined in real time on the PWC by a computer running HYPACK hydrographic survey software. Navigation information was displayed on a video monitor, allowing PWC operators to navigate along survey...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: CMHRP,
Cape Blanco,
Coastal and Marine Hazards and Resources Program,
Curry County,
Echo Sounders,
This raster dataset represents approximately 49,581 square kilometers of Simrad EM122 multibeam backscatter-intensity data collected in the Bering Sea during U.S. Geological Survey (USGS) cruise MGL1111 aboard the R/V Marcus G. Langseth. Calibrated backscatter-intensity time-series data were adjusted for range-angle, beam pattern, and power-gain distortions.
Sediment grain-size distributions and total organic carbon contents were measured at four intertidal sites and three subtidal sites along the urban waterfront (east shore) of Bellingham Bay, Washington, July 3-11, 2019 and June 6-August 31, 2020. Intertidal substrate was sampled in eelgrass beds, and subtidal substrate was sampled inside and outside of the deep edge of eelgrass beds.
Categories: Data;
Tags: Bay,
Bellingham Bay,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Grain-size analysis,
This part of the data release presents bathymetry data from the Elwha River delta collected in February 2016 using two personal watercraft (PWCs). The PWCs were equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers.
This portion of the USGS data release presents topography data collected during surveys performed on the Elwha River delta, Washington, in February 2016 (USGS Field Activity Number 2016-608-FA). Topography data were collected on foot with global navigation satellite systems (GNSS) equipment mounted on backpacks operating primarily in Real-Time Kinematic (RTK) mode. A total of 5 GNSS backpacks, each equipped with a dual-frequency GNSS receiver and handheld data collector, were used during the survey. Differential corrections were transmitted at 1-Hz intervals by a VHF radio to the backpack GNSS receivers from a GNSS base station placed on a benchmark with known horizontal and vertical coordinates relative to the...
This portion of the data release presents a digital surface model (DSM) and hillshade of Whiskeytown Lake and the surrounding area derived from Structure from Motion (SfM) processing of aerial imagery acquired on 2019-11-12. Unlike a digital elevation model (DEM), the DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise and vegetation in the original imagery have not been removed. However, in unvegetated areas such as reservoir shorelines and deltas, the DSM is equivalent to a DEM because it represents the ground surface elevation. The raw imagery used to create...
|
|