Skip to main content
Advanced Search

Filters: Tags: 50670364 (X) > partyWithName: Energy and Minerals (X)

5 results (40ms)   

Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Appalachian Basin Province is located in the eastern United States, encompassing all or parts of the counties in Alabama, Georgia, Kentucky, Maryland, New Jersey, New York, North Carolina, Ohio, Pennsylvania, Tennessee, Virginia, and West Virginia. The main population centers within the study area are Birmingham, Alabama; Buffalo,...
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: 506701 = Conasauga-Rome/Conasauga, 50670101 = Rome Trough, 506702 = Sevier-Knox Trenton, 50670201 = Lower Paleozoic Carbonates, 506703 = Utica-Lower Paleozoic, All tags...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: pre-SM502.8; Tags: 506701 = Conasauga-Rome/Conasauga, 50670101 = Rome Trough, 506702 = Sevier-Knox Trenton, 50670201 = Lower Paleozoic Carbonates, 506703 = Utica-Lower Paleozoic, All tags...
thumbnail
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data, pre-SM502.8; Tags: 506701 = Conasauga-Rome/Conasauga, 50670101 = Rome Trough, 506702 = Sevier-Knox Trenton, 50670201 = Lower Paleozoic Carbonates, 506703 = Utica-Lower Paleozoic, All tags...
thumbnail
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data, pre-SM502.8; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: 506701 = Conasauga-Rome/Conasauga, 50670101 = Rome Trough, 506702 = Sevier-Knox Trenton, 50670201 = Lower Paleozoic Carbonates, 506703 = Utica-Lower Paleozoic, All tags...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: pre-SM502.8; Tags: 506701 = Conasauga-Rome/Conasauga, 50670101 = Rome Trough, 506702 = Sevier-Knox Trenton, 50670201 = Lower Paleozoic Carbonates, 506703 = Utica-Lower Paleozoic, All tags...


    map background search result map search result map National Assessment of Oil and Gas Project - Appalachian Basin Province (067) Boundary National Assessment of Oil and Gas Project - Appalachian Basin (067) Quarter-Mile Cells National Assessment of Oil and Gas Project - Appalachian Basin Province (067) Total Petroleum Systems National Assessment of Oil and Gas Project - Appalachian Basin Province (067) Assessment Units National Assessment of Oil and Gas Project - Appalachian Basin (067) Quarter-Mile Cells National Assessment of Oil and Gas Project - Appalachian Basin Province (067) Boundary National Assessment of Oil and Gas Project - Appalachian Basin (067) Quarter-Mile Cells National Assessment of Oil and Gas Project - Appalachian Basin Province (067) Assessment Units National Assessment of Oil and Gas Project - Appalachian Basin (067) Quarter-Mile Cells National Assessment of Oil and Gas Project - Appalachian Basin Province (067) Total Petroleum Systems