Filters: Tags: Bathymetric (X)
18 results (20ms)|
Filters
|
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data;
Tags: 3D Elevation Program,
3DEP,
American Society of Photogrammetry and Remote Sensing,
Base Maps,
Bathymetric,
This bathymetric dataset provides an update to the stage-storage relation for Quail Lake (reservoir) located in the El Dorado National Forest, Calif. Bathymetric data was collected using a multibeam echo sounder to provide near-complete coverage and was merged with USGS 3DEP lidar to compute a DEM of the lake and near shore. The DEM was used to computed storage and surface area for a range of stage elevations. Results show that the spillway elevation was 6799.3 feet (NAVD88) and the crest elevation was 6802.5 feet (NAVD88). At the spillway elevation the storage was 141.74 ac-ft with a surface area of 14.20 ac. At the crest elevation the storage was 190.05 ac-ft with a surface area of 15.89 ac.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Bathymetric,
California,
Eldorado National Forest,
Geomorphology,
Hydrology,
Hydroacoustic (sonar) data were collected for the Mississippi, St. Croix, and Minnesota Rivers for the development of high-resolution bathymetry and sidescan imagery. Small areas containing priority mussel habitat had additional collection efforts to map water velocities and bottom composition. Combining these data in a GIS can provide key components to characterizing physical benthic habitat for native mussels in a riverine environment. This information is highly desired by the National Park Service to more accurately assess environmental factors that influence native mussel distribution. The collaborative effort was funded by the Legislative-Citizen Commission on Minnesota Resources (LCCMR) Environment and Natural...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Bathymetric,
Condition Survey,
Hydro Survey,
Hydrographic,
Minnesota,
Bathymetric, topographic, and grain-size data were collected in May 2009 along a 33-mi reach of the Colorado River in Grand Canyon National Park, Arizona. The study reach is located from river miles 29 to 62 at the confluence of the Colorado and Little Colorado Rivers. Channel bathymetry was mapped using multibeam and singlebeam echosounders, subaerial topography was mapped using ground-based total-stations, and bed-sediment grain-size data were collected using an underwater digital microscope system. These data were combined to produce digital elevation models, spatially variable estimates of digital elevation model uncertainty, georeferenced grain-size data, and bed-sediment distribution maps.
Types: Citation;
Tags: Arizona,
Colorado River,
Diamond Creek,
Grand Canyon,
Grand Canyon National Park,
This is the Original Product Resolution (OPR) Digital Elevation Model (DEM)of a topobathymetric model as provided to the USGS National Geospatial Technical Operations Center (NGTOC). This DEM is delivered in the original resolution, with the original spatial reference as it was provided to the NGTOC. All elevation units have been converted to meters.
Bathymetric, topographic, and grain-size data were collected in May 2012 along a 33-mi reach of the Colorado River in Grand Canyon National Park, Arizona. The study reach is located from river miles 29 to 62 at the confluence of the Colorado and Little Colorado Rivers. Channel bathymetry was mapped using multibeam and singlebeam echosounders, subaerial topography was mapped using ground-based total-stations, and bed-sediment grain-size data were collected using an underwater digital microscope system. These data were combined to produce digital elevation models, spatially variable estimates of digital elevation model uncertainty, georeferenced grain-size data, and bed-sediment distribution maps.
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Puget Sound. Puget Sound is located along the northwestern coast of Washington and is part of the Salish Sea. Puget Sound is the third largest estuary in the United States. High-resolution coastal elevation data is required to identify flood, storm, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Puget...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Central California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Central California. The Central California TBDEM integrates 70 different topographic and bathymetric data sources...
To support the modeling of the Colorado River water storage area capacity tables by the U.S. Geological Survey (USGS) Utah Water Science Center in the Glen Canyon National Recreation Area in Utah and Arizona, the USGS Earth Resources Observation and Science (EROS) Center has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for Lake Powell, the second largest man-made reservoir in the United States. Located in south-central Utah and north-central Arizona, Lake Powell is a reservoir on the Colorado River created by the flooding of a natural canyon by the construction of Glen Canyon Dam. The new Lake Powell TBDEM consists of the best available multi-source topographic and bathymetric elevation...
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern California Coast. High-resolution coastal elevation data is required to identify flood, hurricane, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the onshore and offshore areas in Northern California. The Northern California TBDEM integrates 26 different topographic and bathymetric data sources...
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal Georgia. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for Coastal Georgia including neighboring bays, estuaries, waterways, inlets, and...
During autumn 2009 and winter 2010, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers (USACE), conducted a hydrographic survey using a multibeam echosounder system (MBES). The survey was from river mile (RM) 130 to 142 on the Snake River, and from RM 0 to 2 on the Clearwater River areas of Lower Granite Reservoir. The survey mapped the part of the river that was accessible to the boat and the echosounder equipment, but very shallow areas along the banks that were inaccessible or too shallow to be measured with echosounder equipment were not mapped. The survey was conducted in 1-mile segments, and the data were combined to provide a continuous digital elevation dataset of the...
The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) has started to initiate the development of pilot 3D National Topography Models to generate 3-dimensional surface elevation models that integrate river topographic bare-earth elevation surfaces with channel bed bathymetry. Detailed knowledge of integrated river system topography, bathymetry, and topobathymetry, is essential for habitat restoration, hydrologic modeling, and other key science applications such as flood mapping and identification of fluvial geomorphic features. An integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Kootenai River near Bonners Ferry, Idaho, has been developed for this first pilot study. The Kootenai...
To support U.S. Army Corps of Engineers (USACE) storm surge modeling for the Louisiana Coastal Protection and Restoration Authority (CPRA), Lowermost Mississippi River Management Program (LMRMP), the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Northern Gulf of Mexico (NGOM)-2. High-resolution coastal topobathymetric data are required to model flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic...
To support Hurricane Florence impact modeling of storm-induced flooding and sediment transport, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for coastal North Carolina, and South Carolina. High-resolution coastal topobathymetric data are required to characterize flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. This TBDEM consists of the best available multi-source topographic and bathymetric elevation data for the Coastal Carolinas including neighboring bays, estuaries,...
This DEM combines active channel topography from September 2015 structure from motion surveys, bathymetric data from August 2015 single beam surveys and overbank/floodplain topography from 2013 aerial lidar. A polygon shapefile describing the source of elevation data over the extent of the DEM is also provided.
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bathymetric,
Nooksack River,
Topography,
lidar,
structure from motion
To support the modeling of storm-induced flooding, the USGS Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Southern California Coast and Channel Islands. The Channel Islands are a chain of eight islands where years of isolation has created unique fauna, flora, and archeological resources. The archipelago extends for 160 miles (257 km) between San Miguel Island in the north and San Clemente Island in the south. Five of the islands are part of Channel Islands National Park (Anacapa, Santa Cruz, Santa Rosa, San Miguel, and Santa Barbara), and the waters surrounding these islands make up the Channel Islands National...
To support the modeling of storm-induced flooding, the U.S. Geological Survey (USGS) Coastal National Elevation Database (CoNED) Applications Project has created an integrated 1-meter topobathymetric digital elevation model (TBDEM) for the Strait of Juan de Fuca, which is located at the outlet of the Salish Sea. The international boundary between Canada and the northwestern part of the United States bisects the strait. High-resolution coastal topobathymetric data is required to identify flooding, storms, and sea-level rise inundation hazard zones and other earth science applications, such as the development of sediment transport and storm surge models. The new TBDEM consists of the best available multi-source topographic...
|
|
