Filters: Tags: Bellingham Bay (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
8 results (175ms)
Filters
Date Range
Contacts
Categories Tag Types Tag Schemes |
This portion of the data release presents a high-resolution orthomosaic images of the intertidal zone at Post Point, Bellingham Bay, WA. The orthomosaics were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-06. The orthomosaics are presented with two resolutions: one image, covering the entire survey area, has a resolution of 2 centimeters per pixel; the other image which was derived from a lower-altitude flight, covers an inset area within the main survey area and has a resolution of 1 centimeter per pixel. The raw imagery used to create the orthomosaics was acquired using a UAS fitted with a Ricoh GR II digital camera featuring a global...
This portion of the data release presents digital surface models (DSMs) and hillshade images of the intertidal zone at Post Point, Bellingham Bay, WA. The DSMs were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-06. Unlike a digital elevation model (DEM), the DSMs represent the elevation of the highest object within the bounds of a cell. Vegetation, buildings and other objects have not been removed from the data. In addition, data artifacts resulting from noise in the original imagery have not been removed. The DSMs are presented with two resolutions: one DSM, covering the entire survey area, has a resolution of 4 centimeters per pixel;...
Geochemical data are reported for surface sediments and long sediment cores from Bellingham Bay, Whatcom County, Washington, collected in early February 2020 after flood conditions on the Nooksack River. Data include total organic carbon content (TOC), carbonate content (CaCO3), ratios of stable carbon 13/12 isotopes (d13C), ratios of total carbon to total nitrogen (C:N), short-lived cosmogenic radionuclide activities (Beryllium-7, Cesium-137, and excess Lead-210), and elemental chemistry.
Categories: Data;
Tags: Bellingham Bay,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Geochemistry,
Mercury analysis,
This portion of the data release presents topographic point clouds of the intertidal zone at Post Point, Bellingham Bay, WA. The point clouds were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unmanned aerial system (UAS) on 2019-06-06. Two point clouds are presented with different resolutions: one point cloud (PostPoint_2019-06-06_pointcloud.zip) covers the entire survey area and has 145,653,2221 points with an average point density of 1,057 points per-square meter; the other point cloud (PostPointHighRes_2019-06-06_pointcloud.zip) has 139,427,055 points with an average point density of 3,487 points per-square meter and was derived from a lower-altitude flight covering...
Elemental compositions are reported for the fine fraction of surface sediments from Bellingham Bay (June 2017 and March 2019) and in the fine fraction of streambank sediment from the Nooksack River (September 2017, March 2019, September 2019), Squalicum Creek (March and September 2019), Whatcom Creek (March and September 2019), and Padden Creek (March and September 2019). Major oxide percentages are reported in Nooksack River fine sediment collected in September 2017. Ancillary data for sediment collected during 2017 and 2019 from Bellingham Bay, Nooksack River, and small creeks include: percent weights of gravel, sand, and fines; total organic carbon content (TOC); carbonate content (CaCO3); ratios of stable carbon...
Categories: Data;
Tags: Bellingham Bay,
CMHRP,
Chuckanut Bay,
Coastal and Marine Hazards and Resources Program,
Geochemistry,
This portion of the data release presents the locations of the temporary ground control points (GCPs) used for the structure-from-motion (SfM) processing of the imagery collected during an unmanned aerial system (UAS) survey of the intertidal zone at Post Point, Bellingham Bay, WA on 2019-06-06. Nineteen temporary ground control points (GCPs) were distributed throughout each survey area to establish survey control. The GCPs consisted of a combination of small square tarps with black-and-white cross patterns and "X" marks placed on the ground using temporary chalk. The GCP positions were measured using post-processed kinematic (PPK) GPS, using corrections from a GPS base station located approximately 5 kilometers...
Categories: Data;
Tags: Bathymetry and Elevation,
Bellingham,
Bellingham Bay,
CHMRP,
Coastal and Marine Hazards and Resources Program,
RBRduo pressure and temperature sensors (early 2015 generation), mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Bellingham Bay, Washington, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.
Categories: Data;
Tags: Bellingham Bay,
CMHRP,
Coastal and Marine Hazards and Resources Program,
Distributions,
Oceans,
This portion of the data release presents the raw aerial imagery collected during an Unmanned Aerial System (UAS) survey of the intertidal zone at Post Point, Bellingham Bay, WA, on 2019-06-06. The imagery was acquired using a Department of Interior-owned 3DR Solo quadcopter fitted with a Ricoh GR II digital camera featuring a global shutter. The camera was mounted using a fixed mount on the bottom of the UAS and oriented in an approximately nadir orientation. The UAS was flown on pre-programmed autonomous flight lines which were oriented roughly shore-parallel and were spaced to provide approximately 70 percent overlap between images from adjacent lines. Three flights (F01, F02, F03) covering the survey area were...
|
![]() |