Filters: Tags: CONUS (X) > partyWithName: U.S. Geological Survey (X)
100 results (118ms)|
Filters
Date Range
Types
Contacts
Categories Tag Types
|
The Monitoring Trends in Burn Severity (MTBS) Program assesses the frequency, extent, and magnitude (size and severity) of all large wildland fires (wildfires and prescribed fires) in the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico for the period 1984 and beyond. All fires reported as greater than 1,000 acres in the western U.S. and greater than 500 acres in the eastern U.S. are mapped across all ownerships. MTBS produces a series of geospatial and tabular data for analysis at a range of spatial, temporal, and thematic scales and are intended to meet a variety of information needs that require consistent data about fire effects through space and time. This map layer is a thematic raster image...
The U.S. Geological Survey (USGS) Water Resources Mission Area (WMA) is working to address a need to understand where the Nation is experiencing water shortages or surpluses relative to the demand for water need by delivering routine assessments of water supply and demand and an understanding of the natural and human factors affecting the balance between supply and demand. A key part of these national assessments is identifying long-term trends in water availability, including groundwater and surface water quantity, quality, and use. An understanding of the impacts of reservoirs on water availability is essential for this assessment. This data release contains decadal time series of cumulative reservoir storage...
Categories: Data;
Tags: CONUS,
USGS Science Data Catalog (SDC),
United States,
Water Resources,
inlandWaters
LANDFIRE's (LF) 2022 Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. CC supplies information for fire behavior models to determine the probability of crown fire initiation, provide input in the spotting model, calculate wind reductions, and to calculate fuel moisture conditioning. To create this product, plot level CC values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance CC and Canopy Height (CH) are used as predictors of disturbed CC using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and...
LANDFIRE (LF) 2022 Fuel Vegetation Cover (FVC) represents the LF Existing Vegetation Cover (EVC) product, modified to represent pre-disturbance EVC in areas where disturbances have occurred over the past 10 years. EVC is mapped as continuous estimates of canopy cover for tree, shrub, and herbaceous lifeforms with a potential range from 10% to 100%. Continuous EVC values are binned to align with fuel model assignments when creating FVC. FVC is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVC is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance...
This product ("Prairie fires") presents burned area boundaries for The Flint Hills Ecoregion (KS and OK), one of the most fire prone ecosystems in the United States where hundreds of thousands of acres burn annually as prescribed fire and wildfire. The prairie fire products provide the extent of larger prairie fires in the Flint Hills to record the occurrence of fire and can be used to identify individual burned areas within the perimeters. This product is published to provide fire information of the most fire prone ecosystems to individuals and land management communities for assessing burn extent and impacts on a time sensitive basis. The methods used to produce the prairie fire products from 2019 to present are...
This map layer is a vector polygon shapefile of the perimeters of all currently inventoried fires occurring between calendar year 2021 and 2021 that do not meet standard MTBS size criteria. These data are published to augment the data that are available from the MTBS program. This product was produced using the methods of the Monitoring Trends in Burn Severity Program (MTBS); however, these fires do not meet the size criteria for a standard MTBS assessment. The MTBS Program assesses the frequency, extent, and magnitude (size and severity) of all large wildland fires (wildfires and prescribed fires) in the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico for the period 1984 and beyond. MTBS typically...
The U. S. Fish and Wildlife Service (FWS) requests burn severity assessments through an agreement with the U.S. Geological Survey (USGS) to be completed by analysts with the Monitoring Trends in Burn Severity (MTBS) Program. These data products are burned area boundary shapefiles derived from post-fire sensor data (including Landsat TM, Landsat ETM+, Landsat OLI). The pre-fire and post-fire subsets included were used to create Normalized Burn Ratio (NBR) and then a differenced Normalized Burn Ratio (dNBR) image. The objective of this assessment was to generate burned area boundaries for each fire. Data bundles also include post-fire subset, pre-fire subset, NBR, and dNBR images. This map layer is a thematic raster...
This metadata record describes a series of tabular datasets containing metrics used to characterize drought for select United States Geological Survey (USGS) streamgages for the climate years (April 1 – March 31) 1921 to 2020. These streamgages are a subset of those used in Geospatial Attributes of Gages for Evaluating Streamflow, version 2 (GAGES-II, Falcone, 2011) in the conterminous United States (CONUS). These metrics include streamflow percentiles, identified drought events, annual low streamflow, and drought statistics for each event.
Raw sequencing data as generated by the five different methods used are provided for each of the three samples used in the comparison. The files are in FASTQ format as exported from the Oxford Nanopore’s MK1C using MinION flowcells. Files are labeled according to the method (as described in the paper) and the Sample ID). The MK1C exports data in blocks of 6000 reads per FASTQ file and all the FASTQ files from each method and sample are grouped in a common folder.
Categories: Data;
Tags: CONUS,
Emerging Infectious Disease,
Highly Pathogenic Avian Influenza Virus,
Methods Comparison,
Methods Development,
These tabular data sets represent daily climate metrics processed from 4 kilometer GridMET data (Abatzoglou, 2013) for the period of record 1980 through 2020 and compiled for three spatial components: select United States Geological Survey stream gage basins (Staub and Wieczorek, 2023), 2) individual reach flowline catchments of the Upper and Lower Colorado (ucol) portions of the Geospatial Fabric for the National Hydrologic Model, version 1.1 (nhgfv11, Bock and others, 2020 ), and 3) the upstream watersheds of each individual nhgfv11 flowline catchments. Flowline reach catchment information characterizes data at the local scale using the python tool set called gdptools (McDonald, 2021). Reach catchments accumulated...
Categories: Data;
Tags: CONUS,
Conterminous United States,
Coterminous United States,
Geospatial Fabric,
GridMET,
Peak ground velocity (PGV) gridded probabilistic seismic hazard data for the updated 2018 National Seismic Hazard Model (NSHM) for the Conterminous United States (CONUS). PGV hazard curves and ground motions have been calculated on a 0.05 by 0.05 degree grid using the NSHM CONUS 2018 earthquake source model. PGV support has been incorporated into the NSHM using a newly developed PGV model conditioned on pseudo-spectral acceleration (Abrahamson and Bhasin, 2020, PEER Report No. 2020/05). See Powers et al. (in press) for implementation details. This dataset complements the "Data Release for Additional Period and Site Class Data for the 2018 National Seismic Hazard Model for the Conterminous United States (ver. 1.2,...
This dataset summarizes impairment status for HUC12 watersheds at the CONUS scale using the EPA publicly available Assessment, Total Maximum Daily Load (TMDL) Tracking and Implementation System (ATTAINS) geospatial package and the USGS Watershed Boundary Dataset (WBD). ATTAINS is an online system maintained by the EPA containing information about the condition of the Nation’s surface waters, as reported by individual states. These data were downloaded in October 2023 and primarily reflect 2022 stream conditions. Because of the varying data types that exist in the database, an independent methodology was developed for summarizing impairment status for HUC12 watersheds using the USGS WBD as detailed in this metadata...
These tabular data sets represent the average daily soil moisture water content (kg/m^2) for four different soil layers processed from North American Land Data Assimilation System (NLDAS-2) data (Xia and others, 2012) for the period of record 1980 through 2020 and compiled for three spatial components: 1) select United States Geological Survey stream gage basins (Staub and Wieczorek, 2023), 2) individual reach flowline catchments of the Upper Colorado (ucol) portion of the Geospatial Fabric for the National Hydrologic Model, version 1.1 (nhgfv11, Bock and others, 2020 ), and 3) the upstream watersheds of each individual nhgfv11 flowline catchments. Flowline reach catchment information characterizes data at the local...
Categories: Data;
Tags: CONUS,
Conterminous United States,
Coterminous United States,
Geospatial Fabric,
Hydrologic Modeling,
We developed an approach to quantify Urban Heat Island (UHI) extent and intensity in 50 cities of CONUS and its surrounding area by using surface temperature from Landsat surface temperature product in a time series manner. Landsat land surface temperature from Landsat Analysis Ready Data (ARD) were used to quantify surface temperature changes from 1985 to 2020. The current study assessed UHI intensity and its variations associated with urban development in an annual basis. Two datasets, over the study period, show that the maximum surface temperature in the high intensity urban area significantly increased while no significant trend was found in surrounding non-urban areas. These released datasets were spatially...
The U. S. Fish and Wildlife Service (FWS) requests burn severity assessments through an agreement with the U.S. Geological Survey (USGS) to be completed by analysts with the Monitoring Trends in Burn Severity (MTBS) Program. These data products are burned area boundary shapefiles derived from post-fire sensor data (including Landsat TM, Landsat ETM+, Landsat OLI). The pre-fire and post-fire subsets included were used to create Normalized Burn Ratio (NBR) and then a differenced Normalized Burn Ratio (dNBR) image. The objective of this assessment was to generate burned area boundaries for each fire. Data bundles also include post-fire subset, pre-fire subset, NBR, and dNBR images. This map layer is a thematic raster...
The U. S. Fish and Wildlife Service (FWS) requests burn severity assessments through an agreement with the U.S. Geological Survey (USGS) to be completed by analysts with the Monitoring Trends in Burn Severity (MTBS) Program. These data products are burned area boundary shapefiles derived from post-fire sensor data (including Landsat TM, Landsat ETM+, Landsat OLI). The pre-fire and post-fire subsets included were used to create Normalized Burn Ratio (NBR) and then a differenced Normalized Burn Ratio (dNBR) image. The objective of this assessment was to generate burned area boundaries for each fire. Data bundles also include post-fire subset, pre-fire subset, NBR, and dNBR images. This map layer is a thematic raster...
The U. S. Fish and Wildlife Service (FWS) requests burn severity assessments through an agreement with the U.S. Geological Survey (USGS) to be completed by analysts with the Monitoring Trends in Burn Severity (MTBS) Program. These data products are burned area boundary shapefiles derived from post-fire sensor data (including Landsat TM, Landsat ETM+, Landsat OLI). The pre-fire and post-fire subsets included were used to create Normalized Burn Ratio (NBR) and then a differenced Normalized Burn Ratio (dNBR) image. The objective of this assessment was to generate burned area boundaries for each fire. Data bundles also include post-fire subset, pre-fire subset, NBR, and dNBR images. This map layer is a thematic raster...
The USGS’s FORE-SCE model was used to produce land-use and land-cover (LULC) projections for the conterminous United States. The projections were originally created as part of the "LandCarbon" project, an effort to understand biological carbon sequestration potential in the United States. However, the projections are being used for a wide variety of purposes, including analyses of the effects of landscape change on biodiversity, water quality, and regional weather and climate. The year 1992 served as the baseline for the landscape modeling. The 1992 to 2005 period was considered the historical baseline, with datasets such as the National Land Cover Database (NLCD), USGS Land Cover Trends, and US Department of Agriculture's...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: CONUS,
CONUS,
Conterminous,
Conterminous United States,
FORE-SCE,
LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Height (EVH) represents the average height of the dominant vegetation for a 30-m cell. EVH is produced separately for tree, shrub, and herbaceous lifeforms using training data depicting the weighted average height by species cover and Existing Vegetation Type (EVT) lifeform. Decision tree models using field reference data, lidar, and Landsat are developed separately for each lifeform, then lifeform specific height class layers are merged along with land cover into a single EVH product based on the dominant lifeform of each pixel. EVH ranges are continuous for the herbaceous lifeform category ranging from 0.1 to 1 meter with decimeter increments, 0.1 to 3...
This metadata record describes a series of tabular datasets containing metrics used to characterize drought for select United States Geological Survey (USGS) streamgages in and surrounding the Colorado River Basin for the climate years (April 1 – March 31) 1981 to 2020. These streamgages are a subset of those used in Geospatial Attributes of Gages for Evaluating Streamflow, version 2 (GAGES-II, Falcone, 2011) with some additional USGS streamgages not in the GAGES-II dataset added. The metrics include streamflow percentiles, identified drought events, annual low streamflow, and statistics for each drought event.
|
|
