Elevation artifacts in digital bathymetric and topographic models for United States east (east_cdem_v1.tif) and west (west_cdem_v.tif) coasts (polygon shapefile, geographic, NAD83)

Investigations of coastal change and coastal resources often require continuous elevation profiles from the seafloor to coastal terrestrial landscapes. Differences in elevation data collection in the terrestrial and marine environments result in separate elevation products that may not share a vertical datum. This data release contains the assimilation of multiple elevation products into a continuous digital elevation model at a resolution of 3-arcseconds (approximately 90 meters) from the terrestrial landscape to the seafloor for the contiguous U.S., focused on the coastal interface. All datasets were converted to a consistent horizontal datum, the North American Datum of 1983, but the native vertical datum for...

Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Alabama, CMGP, California, Canadian Hydrographic Service, Chesapeake Bay, All tags... Coastal and Marine Geology Program, Connecticut, DEM, Delaware, Depth, Florida, Florida Keys, Georgia, Gulf of Maine, Gulf of Mexico, Long Island, Louisiana, Maine, Maryland, Massachusetts, Middle Atlantic Bight, Mississippi, NED, NOAA, National Oceanic and Atmospheric Association, New England, New Jersey, New York, North Carolina, Northwestern Atlantic Ocean, Oregon, Puget Sound, South Atlantic Bight, South Carolina, Texas, U.S. Geological Survey, USGS, United States, Vector data, Virginia, WHCMSC, Washington, Woods Hole Coastal and Marine Science Center, digital elevation models, geoscientificInformation, land surface characteristics, oceans, Fewer tags

GeoTIFF image of the backscatter intensity of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor offshore of Moriches Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

Grid of the sea-floor bathymetry offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Esri binary grid, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

Tracklines of a multibeam survey of the sea floor southwest of Montauk Point, New York, in 1998 (polyline shapefile, geographic, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), EM 1000, Long Island, All tags... Middle Atlantic Bight, Montauk Point, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags

GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor southwest of Montauk Point, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, image, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

 A bathymetric terrain model of multibeam sonar data collected between 2005 and 2018 along the Queen Charlotte Fault System in the Eastern Gulf of Alaska from Cross Sound, Alaska to Queen Charlotte Sound, Canada. (30 meter resolution, 32-bit GeoTIFF, UTM 8 WGS 84, WGS 84 Ellipsoid)

This data publication is a compilation of six different multibeam surveys covering the previously unmapped Queen Charlotte Fault offshore southeast Alaska and Haida Gwaii, Canada. These data were collected between 2005 and 2018 under a cooperative agreement between the U.S. Geological Survey, Natural Resources Canada, and the National Oceanic and Atmospheric Administration. The six source surveys from different multibeam sonars are combined into one terrain model with a 30-m resolution. A complementary polygon shapefile records the extent of each source survey in the output grid.

Categories: Data; Types: Downloadable, GeoTIFF, Map Service, Raster; Tags: Baranof Fan, Baranof Island, CCGS Vector, CHS, CMHRP, All tags... Canada, Canadian Hydrographic Service, Chatham Strait, Chichagof Island, Coastal and Marine Hazards and Resources Program, Cross Sound, Dixon Entrance, Elevation, GeoscientificInformation, Gulf of Alaska, Haida Gwaii, Heceta Knoll, Icy Point, Moresby Canyon, NOAA, NOAA Ship Fairweather, NRC, National Oceanographic and Atmospheric Administration, Natural Resources Canada, North Pacific Ocean, Noyes Canyon, Oceans, PCMSC, Pacific Coastal and Marine Science Center, Pacific Ocean, Queen Charlotte Fault, Queen Charlotte Sound, R/V Kilo Moana, R/V Medeia, R/V Sikuliaq, R/V Solstice, U.S. Geological Survey, USGS, United States of America, University of Alaska Fairbanks, University of Hawai'i, WHCMSC, Woods Hole Coastal and Marine Science Center, Yakobi Sea Valley, bathymetry, depth, elevation, geology, geophysics, geospatial datasets, multibeam sonar, seafloor, Fewer tags

Tracklines of a multibeam survey of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (polyline shapefile, geographic, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Long Island, Middle Atlantic Bight, All tags... New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags

Grid of the sea-floor bathymetry southwest of Montauk Point, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Esri binary grid, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), bathymetry, elevation, geoscientificInformation, grid, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

GeoTIFF image of shaded-relief bathymetry of the sea floor southwest of Montauk Point, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

Tracklines of a multibeam survey of the sea floor offshore of Moriches Inlet, New York, in 1998 (polyline shapefile, geographic, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Long Island, Middle Atlantic Bight, All tags... Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags

GeoTIFF image of shaded-relief bathymetry of the sea floor offshore of Moriches Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

GeoTIFF image of the backscatter intensity of the sea floor southwest of Montauk Point, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

Grid of the sea-floor bathymetry offshore of Moriches Inlet, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Long Island, All tags... Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), bathymetry, elevation, geoscientificInformation, grid, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

GeoTIFF image of shaded-relief bathymetry of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags

GeoTIFF image of the backscatter intensity of the sea floor offshore of Moriches Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags

GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84)

Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University...

Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags