Filters: Tags: Chesapeake Bay Watershed (X)
503 results (26ms)|
Filters
Date Range
Types
Contacts
Categories Tag Types Tag Schemes |
The US Geological Survey Chesapeake Bay Watershed Land Cover Data Series, 2011 edition, (CBLCD-e11) consists of Level I Land Cover data for the years 1984, 1992, 2001, 2006 and 2011. It consists of a series of five 8-bit unsigned integer raster data files of 30 meter spatial resolution in Albers Conic Equal Area projection, NAD83 datum. The 1984 – 2006 data layers were created by aggregating most Level II Anderson classes of the USGS CBLCD Land Cover Data Series released in 2010 (Irani and Claggett, 2010).
This metadata record documents 11 comma delimited tables representing the amount of reported best management practice (BMP) implementation for the years from 1985 to 2014 at three geographic scales: county or land-river modeling segment, River Input Monitoring (RIM) station drainage areas, and the entire Chesapeake Bay Watershed (CBWS). Data originated from the Chesapeake Bay Watershed jurisdictions including Maryland, Pennsylvania, Virginia, Delaware, New York, West Virginia, and the District of Columbia. Data were reported to the Chesapeake Bay Program for an annual review of progress toward meeting nitrogen, phosphorus, and sediment reduction goals.
This data release contains summary metrics describing stream stage, stream water temperature, and short-term climate conditions (daily precipitation and air temperature) for 30 streams spanning gradients of forest and row-crop land uses and agricultural best management practice implementation in the Delmarva Peninsula of Delaware, Maryland, and Virginia, USA. This setting is the second of four settings, or "typologies," that will be assessed for the U.S. Geological Survey (USGS) Chesapeake Stream Team project. High-frequency stage, water temperature, and air temperature (approximately 15-minute data) were measured by the USGS from March 2022 to September 2022 and are available at McFarland and others (2024). Additional...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay watershed,
Delaware,
Hydrology,
Maryland,
USGS Science Data Catalog (SDC),
This U.S. Geological Survey (USGS) data release contains daily-mean streamflow and estimated-daily base flow for 225 streamgages in the Chesapeake Bay watershed ranging from 1913 to 2016 (beginning and end dates may vary). There is a table containing hydrograph-separation results by six methods for 225 sites (Hydrograph_separation_results_for_225_streams_in_the_Chesapeake_Bay_watershed) and a summary table with hydrograph-separation results for each site and method (Hydrograph_separation_summary_for_225_streams_in_the_Chesapeake_Bay_watershed). Quantitative estimates of base flow are necessary to address questions of the vulnerability and response of aquatic ecosystems to natural and human-induced change in environmental...
Categories: Data;
Tags: Base flow,
Chesapeake Bay watershed,
Hydrogeology,
Hydrograph separation,
USGS Science Data Catalog (SDC),
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in major rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay River Input Monitoring Network (RIM) stations for the period 1985 through 2019. Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). The load results represent the total mass of nitrogen, phosphorus, and suspended sediment that was exported from each of the RIM watersheds.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay Watershed,
Delaware,
Maryland,
New York,
Pennsylvania,
This data release contains relevant datasets used in the analysis for the Chesapeake Bay stressor identification project, for which results are described in Fanelli and others (2022). For this project, two existing information sources were compiled and summarized to identify key in-stream stressors reported by the scientific literature or through regulatory assessments to be likely affecting benthic macroinvertebrate community metrics in the Chesapeake Bay region: 1) the peer reviewed multi-stressor literature, in which the effects multiple in-stream stressors on benthic macroinvertebrate community metrics are simultaneously assessed; and 2) reported causes of biological impairment as listed by state or district...
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in major rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay Nontidal Network (NTN) stations for the period 1985 through 2018. Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). The load results represent the total mass of nitrogen, phosphorus, and suspended sediment that was exported from each of the NTN watersheds. To determine the trend in loads, the annual load results are flow normalized to integrate out the year-to-year variability in river discharge....
Categories: Data,
Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay Watershed,
Delaware,
Maryland,
New York,
Pennsylvania,
Freshwater salinization is an emerging issue for freshwater environments in the Chesapeake Bay, USA region. Salinization is often described by measurements of specific conductance (SC). This data release contains specific conductance observations collected by multiple regional agencies for streams within the Chesapeake Bay Watershed. This inventory compiles and harmonizes data from the Water Quality Portal (WQP), which is a data repository developed by the National Water Quality Monitoring Council and supported by the U.S. Environmental Protection Agency and U.S. Geological Survey, and the U.S. Geological Survey National Water Information System (NWIS). Both discrete measures of SC, which are single measures taken...
Categories: Data;
Tags: Chesapeake Bay watershed,
Delaware,
District of Columbia,
Hydrology,
Maryland,
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Nitrogen, phosphorus, and suspended-sediment loads, and changes in loads, in rivers across the Chesapeake Bay watershed have been calculated using monitoring data from the Chesapeake Bay Nontidal Network (NTN) stations for the period 1985 through 2018 Nutrient and suspended-sediment loads and changes in loads were determined by applying a weighted regression approach called WRTDS (Weighted Regression on Time, Discharge, and Season). A recently published extension of WRTDS allows users to separate these estimates into high- and low-flow conditions. This data release contains (1) a table of daily high- and low-flow concentration and load estimates for NTN stations between 1985 - 2018 and (2) an R file that contains...
Categories: Data,
Data Release - Revised;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chesapeake Bay Watershed,
Delaware,
Maryland,
New York,
Pennsylvania,
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
Geomorphometry for Streams and Floodplains in the Chesapeake and Delaware Watersheds was generated as part of the project Quantifying Floodplain Ecological Processes and Ecosystem Services in the Delaware River Watershed funded through the William Penn Foundation' Delaware Watershed Research fund. This dataset contains geomorphometry for streams and floodplains in the Chesapeake and Delaware River watersheds. Geomorphometry is a quantitative representation of landscape surface form (e.g., channel width and depth) obtained from digital elevation models (DEMs). The dataset contains geomorphometry derived from running 3-m DEMs through the Floodplain and Channel Evaluation Tool (FACET) version 0.1.0. FACET generates...
|
|
