Filters: Tags: Conterminous U.S. (X)
50 results (4ms)|
Filters
|
This dataset consists of a series of rasters covering the conterminous United States. Each raster is a one kilometer (km) grid for 18 selected Census of Agriculture statistics mapped to land use pixels for the time period 1950 to 2012. A supplemental set of 9 statistics mapped at the entire county level are also provided as 1-km rasters. The rasters are posted as ArcGIS grids. The statistics represent values for crops, livestock, irrigation, fertilizer, and manure usage. Most statistics are mapped for all 14 Census of Agriculture reporting years in that time frame: 1950, 1954, 1959, 1964, 1969, 1974, 1978, 1982, 1987, 1992, 1997, 2002, 2007, and 2012.
Categories: Data;
Types: Citation;
Tags: Census of Agriculture,
Conterminous U.S.,
Cropland,
Crops,
Dasymetric mapping,
This raster depicts the percentage of lithological the hydraulic conductivity (in micrometers per second) of surface or near surface geology. We derived these rasters by calculating the average conductivity for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geology,
Geophysical,
hydraulic conductivity
This simulated ecosystem carbon dataset is used to report terrestrial carbon balance of the Nisqually River basin in the Ecological Modelling paper "Modeling watershed carbon dynamics as affected by land cover change and soil erosion" The data is derived from simulations of the LUCAS model. Annual carbon variables of 2017 at 30m spatial resolution with 2426 rows and 2459 columns. Carbon stock and flux units are in kgC/m2 and kgC/m2/yr, respectively. Data are in tif format and Albers equal area projection. Overall data creation steps: 1. The pIBIS model was used to generate annual carbon parameters of typical ecosystems. 2. The USPED model was used to generate annual soil erosion and deposition maps as affected by...
Seismicity catalogs, GIS shapefiles, gridded seismic hazard curve data, gridded ground motion data, and mapped gridded ground motion values are available for the 2014 National Seismic Hazard Model for the Conterminous U.S. Probabilistic seismic hazard data and maps of the conterminous U.S. for peak ground acceleration (PGA) and 0.2 and 1.0 second spectral acceleration at probability levels of 2 percent in 50 years (annual probability of 0.000404) and 10 percent in 50 years (annual probability of 0.0021), assuming firm rock soil conditions at 760 m/s, are available. Hazard was calculated on a 0.05 degree by 0.05 degree grid, defined by a bounding box encompassing the conterminous U.S. (-125 to -65 degrees longitude...
Seismicity catalogs, gridded seismic hazard curve data, gridded ground motion data, and mapped gridded ground motion values are available for the 2002 National Seismic Hazard Model for the Conterminous U.S. Seismicity catalogs are available for the western U.S. (in Mw) and central and eastern U.S. (in mb). Probabilistic seismic hazard data and maps of the conterminous U.S. for peak ground acceleration (PGA) and 0.1, 0.2, 0.3, 0.5, 1.0 and 2.0 second spectral acceleration at probability levels of 2 percent in 50 years (annual probability of 0.000404) and 10 percent in 50 years (annual probability of 0.0021), assuming firm rock soil conditions at 760 m/s, are available. Hazard was calculated on a 0.1 degree by 0.1...
This dataset presents where, why, and how much probabilistic ground motions have changed with the 2018 update of the National Seismic Hazard Model (NSHM) for the conterminous U.S. (CONUS) vs. the 2014 NSHM. In the central and eastern U.S., hazard changes are the result of updated ground motion models (further broken down by median and epistemic uncertainty, aleatory variability, and site effects models) and gridded seismicity models. In the western U.S., hazard changes are the result of updated ground motion models in four urban areas with deep sedimentary basins and gridded seismicity models. Probabilistic ground motion changes (2% in 50 years probability of exceedance for a firm rock site, VS30 = 760 m/s, NEHRP...
Categories: Data;
Tags: Conterminous U.S.,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
Peak ground velocity (PGV) gridded probabilistic seismic hazard data for the updated 2018 National Seismic Hazard Model (NSHM) for the Conterminous United States (CONUS). PGV hazard curves and ground motions have been calculated on a 0.05 by 0.05 degree grid using the NSHM CONUS 2018 earthquake source model. PGV support has been incorporated into the NSHM using a newly developed PGV model conditioned on pseudo-spectral acceleration (Abrahamson and Bhasin, 2020, PEER Report No. 2020/05). See Powers et al. (in press) for implementation details. This dataset complements the "Data Release for Additional Period and Site Class Data for the 2018 National Seismic Hazard Model for the Conterminous United States (ver. 1.2,...
This dataset summarizes impairment status for HUC12 watersheds at the CONUS scale using the EPA publicly available Assessment, Total Maximum Daily Load (TMDL) Tracking and Implementation System (ATTAINS) geospatial package and the USGS Watershed Boundary Dataset (WBD). ATTAINS is an online system maintained by the EPA containing information about the condition of the Nation’s surface waters, as reported by individual states. These data were downloaded in October 2023 and primarily reflect 2022 stream conditions. Because of the varying data types that exist in the database, an independent methodology was developed for summarizing impairment status for HUC12 watersheds using the USGS WBD as detailed in this metadata...
The Bing Maps team at Microsoft released a U.S.-wide vector building dataset in 2018, which includes over 125 million building footprints for all 50 states in GeoJSON format. This dataset is extracted from aerial images using deep learning object classification methods. Large-extent modelling (e.g., urban morphological analysis or ecosystem assessment models) or accuracy assessment with vector layers is highly challenging in practice. Although vector layers provide accurate geometries, their use in large-extent geospatial analysis comes at a high computational cost. We used High Performance Computing (HPC) to develop an algorithm that calculates six summary values for each cell in a raster representation of each...
This product provides tabular estimates of kilograms of nitrogen and phosphorus from a) fertilizer, and b) manure, for counties in the conterminous United States for the period 1950-2017. Data are generated for approximate five-year periods over the time, coinciding with U.S. Department of Agriculture Census of Agriculture census years. This data release also includes a model archive suitable for recreating the 2017 fertilizer estimates.
This product provides tabular data from the U.S. Department of Agriculture (USDA) Census of Agriculture for selected items for the period 1950-2017 for counties in the conterminous United States. Data from 1950-2012 are taken from LaMotte (2015) and 2017 data are retrieved from the USDA QuickStats online tool. Data which are withheld in the Census of Agriculture are filled with estimates. The data include crop production values for 12 commodities (for example, corn in bushels), land use values for 7 land use types (for example, acres of total cropland), and 9 values for livestock types (for example, number of hogs and pigs). The data are largely intended as a 2017 update to the LaMotte dataset for items of research...
This dataset consists of a series of 1-kilometer rasters which provide a mapping of the estimated use of 101 agricultural pesticide compounds for the conterminous United States. Each compound is mapped annually for the years 2013 through 2017, thus there are 505 rasters posted (101 compounds x 5 years). The datasets were created by taking previously-published county-level estimates of kilograms of agricultural pesticide use, then allocating them to agricultural pixels from the 2016 National Land Cover Database, aggregated to 1-kilometer spatial resolution.
Categories: Data;
Tags: Agriculture,
Conterminous U.S.,
Dasymetric mapping,
Land use,
National Land Cover Database,
The 2014 update of the U.S. Geological Survey (USGS) National Seismic Hazard Model (NSHM) for the conterminous United States (2014 NSHM; Petersen and others, 2014; https://pubs.usgs.gov/of/2008/1128/) included probabilistic ground motion maps for 2 percent and 10 percent probabilities of exceedance in 50 years, derived from seismic hazard curves for peak ground acceleration (PGA) and 0.2 and 1.0 second spectral accelerations (SAs) with 5 percent damping for the National Earthquake Hazards Reduction Program (NEHRP) site class boundary B/C (time-averaged shear wave velocity in the upper 30 meters [VS30]=760 meters per second [m/s]). This data release provides 0.1 degree by 0.1 degree gridded seismic hazard curves,...
Categories: Data Release - Revised;
Tags: Conterminous U.S.,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
Using the National Oceanic Atmospheric Administration’s (NOAA) Air Stagnation Index (ASI), the total number of days during 2007–2016 with atmospheric conditions conducive for stagnant air conditions in the conterminous U.S. are documented in raster format geospatial data. These data provide the number of days that would allow the temporal buildup of atmospheric pollution (NOAA, 2017). NOAA provides ASI data on a monthly basis based on a modified version of Wang and Angell’s (1999) algorithm. The air stagnation index criteria are defined as sea level geostrophic wind less than 8m/sec (meters per second) (if there is a temperature inversion below 850mb (millibars), then less than 10 m/sec), 500 mb wind less than 13m/sec,...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Air stagnation,
Atmosphere,
Climatology,
Conterminous U.S.,
Energy Resources,
These data were released prior to the October 1, 2016 effective date for the USGS’s policy dictating the review, approval, and release of scientific data as referenced in USGS Survey Manual Chapter 502.8 Fundamental Science Practices: Review and Approval of Scientific Data for Release. This 5-kilometer resolution raster (grid) dataset for the conterminous United States represents the average percentage of infiltration-excess overland flow in total streamflow estimated by the watershed model TOPMODEL. Infiltration-excess overland flow is simulated in TOPMODEL as precipitation that exceeds the infiltration capacity of the soil and enters the stream channel. TOPMODEL was applied to 5- by 5-kilometer areas across the...
The updated 2018 National Seismic Hazard Model includes new ground motion models, aleatory uncertainty, and soil amplification factors for the central and eastern U.S. and incorporates basin depths from local seismic velocity models in four western U.S. (WUS) urban areas. These additions allow us, for the first time, to calculate probabilistic seismic hazard curves for an expanded set of spectral periods (0.01 s to 10 s) and site classes (VS30 = 150 m/s to 1,500 m/s) for the conterminous U.S. (CONUS), as well as account for amplification of long-period ground motions in deep sedimentary basins in the Los Angeles, San Francisco Bay, Salt Lake City, and Seattle regions. Ground motion data for 2, 5, and 10 percent...
Categories: Data,
Data Release - Revised;
Tags: Conterminous U.S.,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
Optimal hydrograph separation (OHS) is a two-component, hydrograph separation method that uses a two-parameter, recursive digital filter (RDF) constrained via chemical mass balance to estimate the base flow contribution to a stream or river (Rimmer and Hartman, 2014; Raffensperger et al., 2017). A recursive digital filter distinguishes between high-frequency and low-frequency discharge data within a hydrograph, where high-frequency data corresponds to quick flow or storms and low-frequency data corresponds to base flow. The two parameters within the RDF are alpha and beta, both are unitless. Alpha is defined as the recession constant and typically found through recession analysis. For the purposes of this data release...
This raster depicts the percentage of lithological magnesium oxide (MgO) content in surface or near surface geology. We derived these rasters by calculating the average percent MgO content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geochemistry,
Geology,
Magnesium,
This raster depicts the percentage of lithological the compressive strength, measured as uniaxial compressive strength (in megaPascals, MPa) of surface or near surface geology. We derived these rasters by calculating the average strength for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
Map Service;
Tags: Bedrock,
Conterminous U.S.,
Geology,
Geophysical,
Rock Strength,
This raster depicts the percentage of lithological aluminum oxide (Al2O3) content in surface or near surface geology. We derived these rasters by calculating the average percent Al2O3 content for each map unit in combined surficial-bedrock geologic maps. We used state geologic maps (Preliminary Integrated Geologic Map Databases for the United States, Open File Reports 2004-1355, 2005-1305, 2005-1323, 2005-1324, 2005-1325, 2005-1351, and 2006-1272), which depict surficial geology instead of bedrock when the surficial layers are sufficiently deep. For the state maps that do not incorporate surficial geology (i.e., midwestern states), we overlaid surficial geologic map units with thicknesses greater than 100 feet (from...
Categories: Data,
Map;
Types: ArcGIS REST Map Service,
ArcGIS Service Definition,
Citation,
Downloadable,
GeoTIFF,
Map Service;
Tags: Al2O3,
Aluminium,
Bedrock,
Conterminous U.S.,
Geochemistry,
|
|
