Skip to main content
Advanced Search

Filters: Tags: Digital Elevation Model (X) > Categories: Data (X)

26 results (26ms)   

Filters
Date Range
Extensions
Types
Contacts
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
Located in the northern tropical Pacific Ocean, Majuro is the capital of the Republic of the Marshall Islands. Majuro Atoll consists of a large, narrow landmass and a set of smaller perimeter islands surrounding a lagoon that is over 100 square miles in size. The waters surrounding the Majuro Atoll land areas are relatively shallow with poorly mapped bathymetry. However, the Pacific Ocean on the exterior of the coral atoll and the lagoon within its interior consist of deep bathymetry with steep slopes. The highest elevation of the Majuro Atoll is estimated at only 3-meters above sea level, which is the island community of Laura located on the western part of the atoll. At the eastern edge of the atoll lies the capital...
Categories: Data; Tags: 3D Elevation Program, 3DEP, American Society of Photogrammetry and Remote Sensing, Base Maps, Bathymetric, All tags...
LiDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LiDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation.
thumbnail
The 90m DEM for Wyoming contains elevation in meters for each 90m cell making up the raster data. In order to conserve space, the DEM was converted from floating point data to integer values. This dataset was converted from US Geological Survey's 1-Degree digital elevation models for Wyoming consisting of a sampled array of elevations for ground positions; see the USGS National Mapping Program's Data User Guide for the DEMs for complete information about the DEM.
thumbnail
The Great Plains Landscape Conservation Cooperative (GPLCC, https://www.fws.gov/science/catalog) is a partnership that provides applied science and decision support tools to assist natural resource managers conserve plants, fish and wildlife in the mid- and short-grass prairie of the southern Great Plains. It is part of a national network of public-private partnerships — known as Landscape Conservation Cooperatives (LCCs, http://www.fws.gov/science/shc/lcc.html) — that work collaboratively across jurisdictions and political boundaries to leverage resources and share science capacity. The Great Plains LCC identifies science priorities for the region and helps foster science that addresses these priorities to support...
thumbnail
Mount Adams, also known by the Native American names "Klickitat" or "Pahto", is a 3,742 meter-tall (12,278 feet) stratovolcano located 53 km (33 miles) north of the Columbia river straddling the borders of Skamania County, Yakima County and the Yakama Nation Reservation. Mount Adams lies in the middle of the Mount Adams volcanic field—a 1,250 square kilometer area (about 480 square miles) comprising at least 120, mostly basaltic volcanoes that form spatter and scoria cones, shield volcanoes, and some extensive lava flows. The volcanic field has been active for at least the past one million years. Mount Adams was active from about 520,000 to about 1,000 years ago and has erupted mostly andesite. Eruptions have occurred...
thumbnail
The 90m DEM for Wyoming contains elevation in meters for each 90m cell making up the raster data. In order to conserve space, the DEM was converted from floating point data to integer values. This dataset was converted from US Geological Survey's 1-Degree digital elevation models for Wyoming consisting of a sampled array of elevations for ground positions; see the USGS National Mapping Program's Data User Guide for the DEMs for complete information about the DEM.
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. Lava domes were extruded during the subsequent eruptive periods of 1980-1986 and 2004-2008. During 2017, U.S. Forest Service contracted the acquisitions of airborne lidar surveys of Mount St. Helens and upper North Fork Toutle River basin, part of a larger 2017-2018 survey of the Gifford Pinchot National Forest. The U.S. Geological Survey combined and reprojected 81 raster datasets, provided by the U.S. Forest Service in October 2018, into a single digital elevation model (DEM) of the ground surface, including beneath forest cover (that is, 'bare earth')....
thumbnail
To assess the current topography of tidal marsh at the study sites we conducted survey-grade global positioning system (GPS) surveys between 2009 and 2014 using a Leica RX1200 Real Time Kinematic (RTK) rover (±1 cm horizontal, ±2 cm vertical accuracy; Leica Geosystems Inc., Norcross, GA; Figure 4). At sites with RTK GPS network coverage (Padilla, Port Susan, Nisqually, Siletz, Bull Island, and Bandon), rover positions were received in real time from the Leica Smartnet system via a CDMA modem (www.lecia-geosystems.com). At sites without network coverage (Skokomish, Grays Harbor, and Willapa), rover positions were received in real time from a Leica GS10 antenna base station via radio link. At sites where we used the...
thumbnail
In 2021, the USGS 3D Elevation Program (3DEP) funded the collection of topo-bathymetric lidar (sometimes referred to as "green lidar") on the McKenzie River, Oregon. As part of this acquisition, lidar data were collected starting on the McKenzie River below Trail Bridge Reservoir and extending downstream roughly 125 km to its confluence with the Willamette River. Bathymetric lidar produced measurements of river bathymetry in areas of the McKenzie River channel that were generally less than 3 m in depth but did not produce measurements in deeper areas of the river. To fill the gaps in the topo-bathymetric lidar dataset (commonly referred to as "voids"), the U.S. Army Corps of Engineers funded USGS to collect boat-based...
thumbnail
Note: NED data can be accessed through The National Map (USGS). Instructions are available on The National Map Viewer homepage. The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS. The NED provides the best available public domain raster elevation data of the conterminous United States, Alaska, Hawaii, and territorial islands in a seamless format. The NED is derived from diverse source data, processed to a common coordinate system and unit of vertical measure. All NED data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are provided in units of...
thumbnail
On October 13, 2020 a survey of Upper Letts Lake was conducted where both bathymetric and terrestrial lidar data were collected. Additionally, six bed material samples and three core samples were collected to understand the characterization of the grain-size of the lake bed. Survey data were merged with an additional lidar dataset from the USGS 3DEP program to create digital elevation model (DEM). The DEM was used to update the stage-storage and stage-surface area tables for the reservoir. This data release provides the following data sets; 1) bathymetric and terrestrial elevation data, 2) Combined bathymetric and 3DEP DEM, 3) stage-storage and stage-surface area tables from DEM, and 4) bed material grain-size and...
thumbnail
The use of high-resolution remotely sensed imagery can be an effective way to obtain quantitative measurements of rock-avalanche volumes and geometries in remote glaciated areas, both of which are important for an improved understanding of rock-avalanche characteristics and processes. We utilized the availability of high-resolution (~0.5 m) WorldView satellite stereo imagery to derive digital elevation data in a 100 km2 area around the 28 June 2016 Lamplugh rock avalanche in Glacier Bay National Park and Preserve, Alaska. We used NASA Ames Stereo Pipeline, an open-source software package available from NASA, to produce one pre- and four post-event digital elevation models (DEMs) of the area surrounding the Lamplugh...
thumbnail
This ArcGIS Server service shaded relief provides a cached service for users of Wyoming geospatial data using ESRI GIS. The service provides scale-dependant representation of the 30 meter DEM shaded relief for Wyoming. USE CONSTRAINTS: Users should follow use constraints found for each data layer available in the mapping service. Visit the Wyoming GeoLibrary for original metadata. WYGISC DOES NOT GUARANTEE 24/7 SUPPORT OF ITS UNFUNDED, FREE MAPPING SERVICES. WyGISC reserves the right to remove access to these services at any time.
thumbnail
Digital surface elevation models (DSMs) of the coastline of Barter Island, Alaska derived from aerial photographs collected on July 01 2014, September 07 2014, and July 05 2015. Aerial photographs and coincident elevation data were processed using Structure-from-Motion (SfM) photogrammetric techniques. These files are single-band, 32-bit floating point DSMs (digital surface models) that represent surface elevations of buildings, vegetation, and uncovered ground surfaces in meters with 23 cm ground sample distance (GSD). The No Data value is set to -32767. The file employs Lempel-Ziv-Welch (LZW) compression.
thumbnail
This ArcGIS Server serviceDRGs (Digital Raster Graphics), or topos (USGS Topographic Maps) provides a cached service for users of Wyoming geospatial data using ESRI GIS. The service provides scale-dependant representation of the 250,000, 100,000, and 24,000 topos for Wyoming. USE CONSTRAINTS: Users should follow use constraints found for each data layer available in the mapping service. Visit the Wyoming GeoLibrary for original metadata. WYGISC DOES NOT GUARANTEE 24/7 SUPPORT OF ITS UNFUNDED, FREE MAPPING SERVICES. WyGISC reserves the right to remove access to these services at any time.
thumbnail
This file contains one of many raster grids of the Elevation Derivatives for National Applications (EDNA), a multi-layered database that provides systematic and consistent topographically-derived hydrologic derivatives. The filled DEM grid was created from the original elevation data by filling all of the depressions, or sinks, in the original DEM. To create this grid, an algorithm was used to loacted and fill all depressions or sinks where there was no flow from pixel to pixel. During this process, efforts were made to maintain natural sink features.
thumbnail
U.S. Geological Survey (USGS) scientists conducted field data collection efforts between March 8th and 25th, 2021 at four sites along coastal North Carolina and South Carolina using high accuracy surveying technologies. The work was initiated as an effort to validate a topobathymetric digital elevation model (TBDEM) produced for the area that was directly impacted by Hurricane Florence in 2018. The goal was to compare the airborne lidar and sonar derived TBDEM to data collected through more traditional means (e.g. Global Navigational Satellite System (GNSS) surveying). In addition, coastal dunes were mapped with ground based lidar (GBL) for computation of dune metrics. The Hurricane Florence TBDEM will support the...
Categories: Data; Tags: 3D Elevation Program, 3DEP, CMHRP, Cape Hatteras National Seashore, CoNED, All tags...
thumbnail
This file contains one of many raster grids of the Elevation Derivatives for National Applications (EDNA), a multi-layered database that provides systematic and consistent topographically-derived hydrologic derivatives. The filled Digital Elevation Model (DEM) grid was created from the original elevation data by filling all of the depressions, or sinks, in the original DEM. To create this grid, an algorithm was used to locate and fill all depressions or sinks where there was no flow from pixel to pixel. During this process, efforts were made to maintain natural sink features.
thumbnail
This is one of five general categories that contain the water related elements of the Rio Grande/Bravo basin. This category includes the land use and cover of the United States and Mexico that are located within the basin boundary. Under this category a digital elevation model for the basin is also included as well as the major soils within the basin.
thumbnail
Note: NED data can be accessed through The National Map (USGS). Instructions are available on The National Map Viewer homepage. The National Elevation Dataset (NED) is the primary elevation data product produced and distributed by the USGS. The NED provides the best available public domain raster elevation data of the conterminous United States, Alaska, Hawaii, and territorial islands in a seamless format. The NED is derived from diverse source data, processed to a common coordinate system and unit of vertical measure. All NED data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are provided in units of...


map background search result map search result map Digital Elevation Model for Wyoming 90 meter Internet Mapping Service: Shaded Relief for Wyoming EDNA Filled DEM LANDFIRE for Wyoming at 1:24,000 Internet Mapping Service: Topographic Maps (DRGs) for Wyoming Digital Elevation Model for Wyoming 10 meter Digital Elevation Model for Wyoming 30 meter Digital Elevation Model for Wyoming 90 meter Hillshade for the Great Plains Landscape Conservation Cooperative GNLCC U.S. 30-meter DEM Illinois River, Brandon Pool 0.5m, Elwood Quad, Contours Land use and cover on the Rio Grande/Bravo basin One Meter Topobathymetric Digital Elevation Model for Majuro Atoll, Republic of the Marshall Islands, 1944 to 2016 Pre- and post-event digital elevation models generated from high-resolution stereo satellite imagery of the 2016 Lamplugh rock avalanche in Glacier Bay National Park and Preserve, Alaska Digital Elevation Models for eight study areas in coastal Oregon and Washington, 2012 Digital surface models of the north coast of Barter Island, Alaska acquired on July 01 2014, September 07 2014, and July 05 2015 (GeoTIFF image) High-resolution digital elevation model for Mount Adams and vicinity, Washington, based on lidar surveys of August-September, 2016 High-resolution digital elevation model of Mount St. Helens and upper North Fork Toutle River basin, based on airborne lidar surveys of July-September, 2017 Stage-Storage and Bed Material Data from the 2020 Upper Letts Lake Survey, California Coastal Carolinas Topobathymetric Model: Field Validation Data, 2021 Digital elevation model and single beam sonar data from the McKenzie River, Oregon, 2021 Illinois River, Brandon Pool 0.5m, Elwood Quad, Contours Stage-Storage and Bed Material Data from the 2020 Upper Letts Lake Survey, California Digital surface models of the north coast of Barter Island, Alaska acquired on July 01 2014, September 07 2014, and July 05 2015 (GeoTIFF image) Pre- and post-event digital elevation models generated from high-resolution stereo satellite imagery of the 2016 Lamplugh rock avalanche in Glacier Bay National Park and Preserve, Alaska High-resolution digital elevation model of Mount St. Helens and upper North Fork Toutle River basin, based on airborne lidar surveys of July-September, 2017 One Meter Topobathymetric Digital Elevation Model for Majuro Atoll, Republic of the Marshall Islands, 1944 to 2016 High-resolution digital elevation model for Mount Adams and vicinity, Washington, based on lidar surveys of August-September, 2016 Coastal Carolinas Topobathymetric Model: Field Validation Data, 2021 Digital Elevation Models for eight study areas in coastal Oregon and Washington, 2012 Digital Elevation Model for Wyoming 90 meter Digital Elevation Model for Wyoming 90 meter Internet Mapping Service: Shaded Relief for Wyoming Internet Mapping Service: Topographic Maps (DRGs) for Wyoming EDNA Filled DEM LANDFIRE for Wyoming at 1:24,000 Digital Elevation Model for Wyoming 10 meter Digital Elevation Model for Wyoming 30 meter Hillshade for the Great Plains Landscape Conservation Cooperative Land use and cover on the Rio Grande/Bravo basin GNLCC U.S. 30-meter DEM