Filters: Tags: Economic geology (X) > Types: OGC WMS Layer (X)
280 results (51ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Hanna, Laramie, Shirley Basins Province is located in south-central Wyoming and north-central Colorado, encompassing all or parts of Larimer County in Colorado and all or parts of Albany, Carbon, Converse, and Natrona, Counties in Wyoming. The main population centers within the study area are Laramie and Rawlins Wyoming. The...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 30 = Hanna, Laramie, Shirley Basins Province,
503001 = Phosphoria,
50300101 = Tensleep-Casper Conventional Oil and Gas,
50300102 = Mesozoic-Cenozoic Conventional Oil and Gas,
503002 = Mowry-Hanna Composite,
This dataset represents lineaments in the Powder River Basin as identified in the following publication: Maughan, E.K., and Perry, W.J., Jr., 1986, Lineaments and their tectonic implications in the Rocky Mountains and adjacent plains region: in Peterson, J.A., ed, Paleotectonics and Sedimentation in the Rocky Mountain Region, United States: American Association of Petroleum Geologists Memoir 41, pp. 41-56. A lineament is defined as a linear topographic feature of regional extent that is believed to reflect crustal structure (Hobbs et al., 1976, p. 267). Lineament features were transferred from the publication to a hard-copy base map by province geologist, then digitized and referenced for use in a Geographic Information...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane,
50330101 = Eastern Basin Margin Upper Fort Union Sandstone,
50330181 = Wasatch Formation,
50330182 = Upper Fort Union Formation,
50330183 = Lower Fort Union-Lance Formations,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province, and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 500101 = Brookian Coalbed Gas Composite,
50010181 = Nanushuk Formation Coalbed Gas,
50010182 = Prince Creek-Tuluvak Formations Coalbed Gas,
50010183 = Sagavanirktok Formation Coalbed Gas,
AK,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 02 = Yukon Flats,
500201 = Tertiary Composite,
50020101 = Tertiary Sandstone,
50020102 = Subthrust,
50020103 = Crooked Creek,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles....
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Contours,
Earth Science,
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles....
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Contours,
Earth Science,
The drilling history documents oil and gas wells in the Lower Miocene 1 sequence as a whole and in 10-year intervals. The wells included in this interval are determined by completion date and by comparing the depth of the wells to structure contours of the Lower Miocene 1 sequence. The data are provided in a single file (lm1_prod.shp) as well as eight 10-year interval files covering 1920 through 1999. These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Earth Science,
Economic geology,
The drilling history documents oil and gas wells in the Lower Miocene 2 sequence as a whole and in 10-year intervals. The wells included in this interval are determined by completion date and by comparing the depth of the wells to structure contours of the Lower Miocene 2 sequence. The data are provided in a single file (lm2_prod.shp) as well as nine 10-year interval files covering 1910 through 1999. These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Coal,
Coalbed Methane,
Coalbed methane resources,
Earth Science,
Economic geology,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Eastern Oregon-Washington Province is located in eastern Oregon and eastern Washington, encompassing all or parts of Baker, Clackamas, Crook, Deschutes, Gilliam, Grant, Harney, Hood River, Jefferson, Linn, Malheur, Marion, Morrow, Sherman, Umatilla, Union, Wallowa, Wasco, Wheeler Counties in Oregon and all or parts of Adams,...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 05 = Eastern Oregon-Washington,
500501 = Creataceous-Tertiary Composite,
50050101 = Eastern Oregon and Washington Conventional Gas,
50050102 = Republic Graben Gas,
50050161 = Columbia Basin Convention Gas,
The Pod (or pods) of Mature Source Rock is a critical element of the Total Petroleum System and incorporates all source rocks that potentially have generated hydrocarbons within the system. The Pod(s) of Mature Source Rock is shown here as a geographic boundary defined and mapped by the geologist responsible for the province, and incorporates the known limit of thermally mature, organic-rich source rock(s) that is responsible for generating and expelling discovered and undiscovered petroleum accumulations, shows, or seeps within the Total Petroleum System. The Pod(s) of Mature Source Rock boundary was mapped by the province geologist after studying the extent of the source rock facies and the temperature and burial...
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 504501 = Barnett Paleozoic,
50450101 = Paleozoic Shelf and Bank Carbonate Oil and Gas,
50450102 = Mississippian Chappel Pinnacle Reef Oil and Gas,
50450161 = Greater Newark East Frac-Barrier Continuous Barnett Shale Gas,
50450162 = Extended Continuous Barnett Shale Gas,
This shapefile includes arcs and polygons that describe U.S. Geological Survey delineated Total Petroleum Systems of the World. Each petroleum system is defined as a mappable entity encompassing genetically related petroleum that occurs in seeps, shows and accumulations (discovered or undiscovered) that have been generated by a pod, or by closely related pods, of mature source rock, together with the essental mappable geologic elements (source, reservoir, seal and overburden rocks) that control fundamental processes of generation, migration, entrapment and preservation of petroleum. Total petroleum systems are described by U.S. Geological Survey scientists on the basis of exploration and production histories, and...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 2000assessment,
Coalbed methane resources,
Economic geology,
Gas resource assessment,
Natural gas liquids resource assessment,
This data set includes arcs, polygons, and polygon labels for geologic and petroleum provinces interpreted and designated by R.M. Pollastro based on numerous literature and map resources.
The data set outlines and describes the general geologic age and type of bedrock of the Former Soviet Union and selected adjacent areas. It also includes shoreline and inland water bodies.
The hydrogen index (HI) is a parameter obtained from Rock-Eval data which reflects general hydrocarbon generation and maturation trends in petroleum systems. In the Mississippian Barnett Shale, the hydrogen index was used to map general boundaries between regions of oil and gas generation within the extents of the formation. Hydrogen index values were obtained via Rock-Eval analyses of Barnett Shale core samples. In this system, HI values greater than 100 represent primarily oil generation and HI values less than 100 represent primarily gas generation. Secondary gas generation is indicated by HI values less than 50. In addition, the 100 HI line was utilized to establish part of the assessment unit (AU) boundaries...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Barnett Continuous Gas,
Barnett Mixed Continuous Gas and Oil,
Continuous Assessment Unit,
Earth Science,
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503301 = Tertiary-Upper Cretaceous Coalbed Methane,
50330101 = Eastern Basin Margin Upper Fort Union Sandstone,
50330181 = Wasatch Formation,
50330182 = Upper Fort Union Formation,
50330183 = Lower Fort Union-Lance Formations,
|
|
