Filters: Tags: Electromagnetic Survey (X)
20 results (68ms)|
Filters
Date Range
Contacts
Tag Types Tag Schemes |
This digital publication, GPR 2014-3, contains CGG's analysis and interpretation of data produced from airborne geophysical surveys published by DGGS in 2013 (GPR 2013-1) for the Southern Dishna River, Fox Hills, and Beaver Creek survey areas. These three survey areas are informally referred to as the Five Spot survey in places in this publication. CGG's frequency-domain DIGHEM V system was used for the EM data. GPR 2014-3 includes (1) CGG's project report with interpretation and detailed EM Anomalies, and (2) Multi-channel stacked profiles in pdf format. Interpretation maps and EM anomalies are provided in various formats (e.g., Geotiffs, KMZs, and others) and are listed in detail in GPR2014-003 ReadMe (.txt and...
OF12-1149.pdf: The published Open File Report Table 1-1.xlsx: Water-quality data for Goose Lake study site, Montana, 1989-2009 Table 1-2.xlsx: Water-quality data for Anderson study site, Montana, 2004, 2005, 2010 Table 1-3.xlsx: Water-quality data for Fuller study site, North Dakota, 2010 Table 1-4.xlsx: Geophysical survey data for the Goose Lake study site, Montana (2004. 2009), for the Anderson study site, (2004, 2010), and for the Fuller study site (2010)
Fortymile mining district electromagnetic and magnetic airborne geophysical survey, data compilation
The Fortymile electromagnetic and magnetic airborne geophysical survey data were acquired with a DIGHEM-V Electromagnetic (EM) system and a cesium magnetometer. The EM and magnetic sensors were flown at a height of 30 meters (m). In addition the survey recorded data from radar and laser altimeters, a GPS navigation system, 50/60 Hz monitors and a video camera. Flights were performed with an AS-350-B2 Squirrel helicopter at a mean terrain clearance of 60 m along N-S survey flight lines with a spacing of 400 m. Tie lines were flown perpendicular to the flight lines at intervals of approximately 4,800 m
This report provides detailed (1:63,360-scale) mapping of the Tanana A-1 and A-2 quadrangles (500 square miles; equivalent to eight 7.5-minute quadrangles). The area is part of the Manley Hot Springs-Tofty mining districts and adjacent to the Rampart mining district to the south of the Tanana B-1 Quadrangle. This report includes detailed bedrock, surficial, structural, and stratigraphic data. Based on the resulting geologic maps, field investigations, and laboratory materials analyses, the report also includes derivative maps of geologic construction materials and geologic hazards. The Tanana A-1 and A-2 Quadrangles and surrounding area comprise several isolated mountainous ridges in the western Yukon-Tanana Upland...
Livengood mining district electromagnetic and magnetic airborne geophysical survey, data compilation
The Livengood electromagnetic and magnetic airborne geophysical survey data were acquired with a DIGHEM-V Electromagnetic (EM) system and a cesium magnetometer. The EM and magnetic sensors were flown at a height of 30 meters (m). In addition the survey recorded data from radar and laser altimeters, a GPS navigation system, 50/60 Hz monitors and a video camera. Flights were performed with an AS-350-B2 Squirrel helicopter at a mean terrain clearance of 60 m along N-S survey flight lines with a spacing of 400 m. Tie lines were flown perpendicular to the flight lines at intervals of approximately 4,800 m
This digital publication, GPR 2013-1, contains data produced from airborne geophysical surveys conducted in 2012 for three separate blocks, the Southern Dishna River, Fox Hills, and Beaver Creek survey areas, in the Iditarod, Ophir, and Holy Cross quadrangles in western Alaska. The areas are in the Iditarod, Innoko, and Aniak mining districts. Aeromagnetic and electromagnetic (EM) data were acquired by helicopter for about 1029 sq miles. Fugro Airborne Survey's frequency-domain DIGHEM V system was used for the EM data. GPR 2013-1 includes (1) raw and processed linedata; (2) gridded, Google Earth, and Geotiff formats of the calculated linedata; (3) maps of the data; and (4) vector files of data contours and flight...
This publication, GPR 2017-1, provides geophysical data produced from an airborne geophysical survey conducted in 2001 and released in 2002 for 276 sq miles of the Liberty Bell area, western Bonnifield mining district, central Alaska. Aeromagnetic and electromagnetic data were acquired during the survey. During 2016, the same digital data were reformatted for ease of use with modern processing tools; vector shapefiles and the analytic signal and calculated first vertical derivative grids were added. Other than the creation of calculated grids, no new processing was done. Data provided in GPR 2017-1 include processed (1) linedata ASCII databases, (2) gridded files of magnetic and resistivity data, (3) vector files...
Merged grids of residual magnetic intensity, digital terrain model, and apparent resistivity compiled from the Black Mountain, Liscum, Goodpaster, SE extension of Salcha River - Pogo, and Salcha River Pogo geophysical surveys.
Merged grids of residual magnetic intensity, digital terrain model, and apparent resistivity compiled from the Tanacross, Ladue, Western Fortymile, and Fortymile geophysical surveys.
This report provides detailed (1:63,360-scale) mapping of portions of U.S. Geological Survey Circle B-2 (1955), B-3 (1955), B-4 (1952), C-2 (1955), C-3 (1955), and C-4 (1952) quadrangles. The area is part of the Circle mining district and adjacent to the Fairbanks mining district. This report includes detailed geologic, structural, stratigraphic, and geochronologic data. Based on the resulting geologic maps, field investigations, and laboratory materials analyses, the project has also generated derivative maps of geologic construction materials and geologic hazards.
This report provides detailed (1:63,360-scale) mapping of the Tanana B-1 Quadrangle (250 square miles; equivalent to four 7.5 minute quadrangles). The area is part of the Manley Hot Springs-Tofty mining districts and adjacent to the Rampart mining district to the north of the Tanana A-1 and A-2 Quadrangles. This report includes detailed bedrock, structural, stratigraphic, and geochronologic data. Based on the resulting geologic maps, field investigations, and laboratory materials analyses, the project has also generated derivative maps of geologic construction materials and geologic hazards.
This digital publication, GPR 2011-4, contains Fugro Airborne Surveys' analysis and interpretation of data produced from airborne geophysical surveys published by DGGS in 2011 (GPR 2011-2) of the Iditarod survey area. Fugro Airborne Surveys' frequency-domain DIGHEM V system was used for the EM data. GPR 2011-4 includes (1) Fugro's project report with interpretation and detailed EM Anomalies in tabular format, (2) Multi-channel stacked profiles in pdf format, and (3) interpretation and em anomalies are each provided as Geotiffs and maps. The document gpr2011_004_readme (.txt and .pdf) lists all files included in this publication. Other supporting files include gpr2011-4_browsegraphic.pdf, gpr2011-4_emanomaly_readme.pdf....
This digital publication, GPR 2014-4, contains CGG's analysis and interpretation of data produced from airborne geophysical surveys published by DGGS in 2013 (GPR 2013-1) and 2014 (GPR 2014-5) for the Middle Styx and Farewell survey areas respectively. The two survey blocks Farewell and Middle Styx are referred to as the 'Farewell' survey in the project report as these blocks were flown under one contract. Elsewhere the separate block names, Farewell and Middle Styx, are typically used. CGG's frequency-domain DIGHEM V system was used for the EM data. GPR 2014-4 includes (1) CGG's project report with interpretation and detailed EM Anomalies, and (2) Multi-channel stacked profiles in pdf format. Interpretation maps...
Frequency domain electromagnetic data and magnetic geophysical data were collected below a helicopter using a 30 meter (m) long line and a towed bird for the 1997 Iron Creek survey. The geophysical data were acquired with a DIGHEM-V Electromagnetic (EM) system, a Scintrex cesium magnetometer, and a Herz VLF system installed in on AS350B-2 Squirrel helicopter. In addition, the survey recorded data from a radar altimeter, GPS navigation system, 50/60 Hz monitors and video camera. Many of the files for this release were published on paper and available by mail order beginning in 1998. This updated data release provides a compilation of the previously published paper files (in PDF format) and the originating data files...
This publication, GPR 2015-3, contains geophysical data produced from airborne surveys conducted in 1996 and released in 1997 for 415 sq miles of the Petersville mining district, Alaska by the Alaska Division of Geological & Geophysical Surveys (DGGS). Aeromagnetic and electromagnetic data were acquired during the helicopter-based surveys. During 2004, the same digital data were reformatted for ease of use with modern processing tools, vector files and the 56,000 Hz resistivity grid, were added, and new color maps were produced. Except for leveling of the 56,000 Hz coplanar resistivity grid, no reprocessing of the geophysical data was done. The files represent the end part of the 2004 process. A few maps produced...
This report provides detailed (1:63,360-scale) mapping of the Tanana B-1 Quadrangle (250 square miles; equivalent to four 7.5 minute quadrangles). The area is part of the Manley Hot Springs-Tofty mining districts and adjacent to the Rampart mining district to the north of the Tanana A-1 and A-2 Quadrangles. This report includes detailed geologic, structural, stratigraphic, and geochronologic data. Based on the resulting geologic maps, field investigations, and laboratory materials analyses, the project has also generated derivative maps of geologic construction materials and geologic hazards.
This digital publication, GPR 2014-1, contains data produced from airborne geophysical surveys conducted in 2013 for the Talkeetna Mountains, Healy, and Mt. Hayes quadrangles in south-central Alaska. The area is in the Valdez Creek and Delta River mining districts. Aeromagnetic and electromagnetic (EM) data were acquired by helicopter for about 1310 sq miles, and additional data donated by Millrock Exploration Corporation, Anchorage, increased coverage by about 12 sq miles. Millrock also provided some infill flight lines for over a similar amount of sq miles. CGG acquired and processed all the airborne geophysical data. The data were all flown with the same systems and contract specifications. CGG's frequency-domain...
The Tonsina electromagnetic and magnetic airborne geophysical survey data were acquired with a DIGHEMv Electromagnetic (EM) system and a CGG D1344 cesium magnetometer with a Scintrex CS3 cesium sensor. The EM and magnetic sensors were flown at a height of 30 meters (m). In addition the survey recorded data from radar and laser altimeters, GPS navigation system, 50/60 Hz monitors and video camera. Flights were performed with an AS-350-B3 Squirrel helicopter at a mean terrain clearance of 60 m along NW-SE (345 degrees) survey flight lines with a spacing of 400 m. Tie lines were flown perpendicular to the flight lines at intervals of approximately 4,800 m. These data were produced under contract between the State of...
The Tok electromagnetic and magnetic airborne geophysical survey data were acquired with a DIGHEMv Electromagnetic (EM) system and a CGG D1344 cesium magnetometer with a Scintrex CS3 cesium sensor. The EM and magnetic sensors were flown at a height of 30 meters (m). In addition the survey recorded data from radar and laser altimeters, a GPS navigation system, 50/60 Hz monitors and a video camera. Flights were performed with an AS-350-B3 Squirrel helicopter at a mean terrain clearance of 60 m along NE-SW (12 degrees) survey flight lines with a spacing of 400 m. Tie lines were flown perpendicular to the flight lines at intervals of approximately 4,800 m. These data were produced under contract between the State of...
The Bonnifield electromagnetic and magnetic airborne geophysical survey data were acquired in 2006 and 2007 with a DIGHEM-V Electromagnetic (EM) system and a cesium magnetometer. The EM and magnetic sensors were flown at a height of 30 meters (m). In addition the survey recorded data from radar and laser altimeters, a GPS navigation system, 50/60 Hz monitors and a video camera. Flights were performed with an AS-350-B3 Squirrel helicopter at a mean terrain clearance of 60 m along N-S survey flight lines with a spacing of 400 m. Tie lines were flown perpendicular to the flight lines at intervals of approximately 4,800 m for part of the Bonnifield mining district in Interior Alaska. Aeromagnetic and electromagnetic...
|
|
