Filters: Tags: Garfield County (X) > Types: OGC WFS Layer (X)
28 results (12ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes |
This dataset consists of 102 magnetotelluric (MT) stations collected in 2012-2014 in the Rio Grande Rift and southern Rocky Mountains. The U.S. Geological Survey acquired these data to improve regional conductivity models of the western United States. This work is in support of studies of the effect of lithospheric modification on electrical resistivity structure and tectonic evolution of the western United States.
Categories: Data;
Types: Citation,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Carson National Forest,
Colfax County,
Colorado,
Colorado Plateau,
Dona Ana County,
This is a polygon coverage of the structure contours of the Calico sequence boundary in the Kaiparowits Plateau, southern Utah. Sequence boundary elevations are based on 166 drill sites. The Calico sequence boundary occurs from 50-100 ft below the base of the John Henry Member, therefore an inferred elevation of the sequence boundary was used at numerous locations along the outcrop where the John Henry Member was mapped. The outside polygon defines the base of the coal-bearing Calico and A-sequences of the Straight Cliffs Formation east of 112 degrees of longitude. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
This section of the data release includes core images in the format of photos (JPG) that have been compressed into a zipped file (2018LakePowellCoring_CorePhotos.zip). It is Part 4 (of four) in this data release and contains images of the cleaned archival half from split cores as they appeared immediately after splitting (late March and early April 2019). Each photo includes a ruler (in centimeters) and X-Rite ColorChecker Classic color correction card that may be used for corrections. Drillhole information, such as location and total recovery, are outlined in “Part 1 – Drillhole information from the 2018 coring project in Lake Powell, Utah” (2018LakePowellCoring_DrillholeInfo.csv) of this data release. Each drillhole...
Development of a high-resolution digital elevation model (DEM) of the pre-Glen Canyon Dam topography in Glen Canyon National Recreation Area, Utah and Arizona was initiated to assist the U.S. Geological Survey (USGS) in its Lake Powell coring program in the fall of 2018 (https://www.usgs.gov/centers/ut-water/science/lake-powell-coring). Topographic surveys of Glen Canyon were commissioned by the Bureau of Reclamation during the planning stages for Lake Powell as part of the Colorado River Storage Project (S. 500, 1956). The Colorado River arm was surveyed by Alster and Associates, Inc. in 1958 and 1959 at a contour interval of 10-feet from the river surface at the future dam site through where the 3,750-foot contour...
This section of the data release includes drillhole information in the format of a comma-separated value (CSV) file (2018LakePowellCoring_DrillholeInfo.csv). It is Part 1 (of four) in this data release and represents the broadest hierarchical information on the dataset including the drillhole name, location, water depth, sediments top and bottom, drillhole depth, and recovery for each coring location. Each drillhole comprises multiple cores which are outlined in “Part 2 – Core and core section information from the 2018 coring project in Lake Powell, Utah” (2018LakePowellCoring_CoreSectionInfo.csv) of this data release. Core logs and spectrophotometry data are available in “Part 3 – Multi-Sensor Core Logger and spectrophotometry...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Animas River,
Antelope Canyon,
Bears Ears National Monument,
Bullfrog,
Bullfrog Bay,
This is a line coverage of the geologic structural features within the Kaiparowits Plateau. Structural features include synclines, anticlines, folds and faults; and are shown in Hettinger and others, chap. T. Faults and fold axes are located along the Earth's surface. This does not imply where they are located in the subsurface.
This is a polygon coverage of the outcrop of the John Henry Member of the Straight Cliffs Formation east of 112 degrees of longitude in the Kaiparowits Plateau, southern Utah. This polygon was used to represent the areas underlain by the Calico Sequence boundary. This polygon was also used as the "outside" clipping polygon for several of the data layers including the overburden and isopach coverages. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
This is a polygon coverage and shapefile that contains undivided Upper Cretaceous rocks that include (in descending order) the Smoky Hollow and Tibbet Canyon Mbs. of the Straight Cliffs Fm., and the Tropic Shale and Dakota Fm. This coverage shows where these rocks are exposed along the outcrop and are buried in the subsurface in the Kaiparowits Plateau study area, southern Utah. The base of the Dakota Fm. was used to define the Kaiparowits Plateau for areas east of 112 degrees of longitude. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
Digitization of a selection of oil and gas well pad sites in the Piceance region of Western Colorado. A random sample of 146 pad locations from the "Digitized Piceance Oil and Gas Pads of Western Colorado, 2015" were used to identify the locations digitized in this dataset. The 146 polygons spatially intersect polygons in the 2015 shape file, but are not completely contained within the 2015 polygons. Well pad sites were delineated using a modified version of the Rapid Land Cover Mapping protocol (Preston and Kim, 2016). The base imagery used to delineate boundaries is the 2005 National Agriculture Imagery Program (NAIP) imagery. Preston, Todd M, and Kevin Kim. 2016. “Land Cover Changes Associated with Recent Energy...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Delta County,
Energy Resources,
Garfield County,
Gunnison County,
This is a line coverage of coal mine adits within the Kaiparowits Plateau study area.
The Lake Powell Coring Project was a USGS research effort, in cooperation with the Utah Department of Environmental Quality, U.S. Bureau of Reclamation, and U.S. National Park Service. In the fall of 2018, hydraulic piston cores targeted sediment that had been deposited in Lake Powell. This large reservoir on the Colorado River in Utah and Arizona was created after the completion of Glen Canyon Dam in 1963. Retrieval and analysis of cores was undertaken in response to the Gold King mine release from the Bonita Peak Mining District in Colorado on August 5, 2015. This event resulted in the containment loss of three-million gallons of mine-impacted waters which flowed from the Animas River into the San Juan River,...
This is a coverage that shows areas in the Kaiparowits Plateau where geologic conditions in the Calico and A-sequences are more favorable for current underground mining technology (Hettinger and other, chap. T). This coverage contains numerous attributes of information. It was compiled by computing the geometric intersection of nine polygon coverages using the ARC/INFO UNION command. This coverage is characterized as being a GUIDE TO WHERE THE MORE FAVORABLE COAL AREAS ARE LIKELY TO BE for current underground mining technology: areas where coal beds in the Calico and A-sequences are greater than 3.5 feet thick, less than 3,000 feet deep, and inclined by less than 12 degrees, as described in Hettinger and others,...
These are shapefiles and polygon coverages that contain numerous attributes of information on coal in the Calico and A-sequences of the Upper Cretaceous Straight Cliffs Formation in the Kaiparowits Plateau study area in southern Utah. These layers were derived from a "union" process of combining numerous polygon coverages using the Environmental Systems Research Institute, Inc. (ESRI) Arc/Info UNION command, and finally calculating coal tonnage in INFO. Net coal thickness values are from 209 data points and represent all coal beds that are more than 1 foot thick. The outside polygon defines the base of the coal-bearing Calico and A-sequences east of 112 degrees of longitude. The northern boundary is delineated by...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 7.5' quadrangles,
Calico sequence boundary,
Colorado Plateau,
Colorado Plateau,
Colorado Plateau coal assessment,
These are shapefiles and ARC/INFO polygon coverages showing the isopachs of total net coal in beds greater than or equal to 1 ft thick for the Cameo/Fairfield coal group and for the Cameo/Wheeler, South Canyon, and Coal Ridge coal zones, southern Piceance Basin coal assessment area. Also included are isopachs of total net coal in beds 1-2.3 ft thick, 2.3-3.5, 3.5-7.0, and 7.0-14, and greater than 14 ft thick in the Cameo/Wheeler coal zone.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Colorado,
Colorado Plateau,
Colorado Plateau,
Delta County,
Garfield County,
High-resolution geophysical mapping of Lake Powell in the Glen Canyon National Recreation Area in Utah and Arizona was conducted between October 8 and November 15, 2017, as part of a collaborative effort between the U.S. Geological Survey and the Bureau of Reclamation to provide high-quality data needed to reassess the area-capacity tables for the Lake Powell reservoir. Seismic data collected during this survey can help to define the rates of deposition within the San Juan and Colorado Rivers, which are the main inflows to Lake Powell. These new data are intended to improve water budget management decisions that affect the natural and recreational resources of the reservoir. Multibeam echosounder bathymetry and...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Antelope Canyon,
BOR,
Bullfrog,
Bullfrog Bay,
Bureau of Reclamation,
This section of the data release includes core log and spectrophotometry data in the format of a comma-separated value (CSV) file (2018LakePowellCoring_CoreLogData.csv). It is Part 3 (of four) in this data release and provides geophysical core logs at 0.5-cm intervals from a Multi-Sensor Core Logger and Konica Minolta spectrophotometer. This CSV includes the depth in section and hole for each logged point, p-wave amplitude and velocity, gamma density, loop- and point-sensor magnetic susceptibility, electrical resistivity, colorspace data, and measured reflectance wavelengths. Drillhole information, such as location and total recovery, are outlined in “Part 1 – Drillhole information from the 2018 coring project in...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Animas River,
Antelope Canyon,
Bears Ears National Monument,
Bullfrog,
Bullfrog Bay,
This section of the data release includes core and core section information in the format of a comma-separated value (CSV) file (2018LakePowellCoring_CoreSectionInfo.csv). It is Part 2 (of four) in this data release and provides detailed core information. Complete recovery of a core resulted in approximately 3 m of sediment, which was sectioned into lengths not exceeding 1.5 m shipboard. Thus, all cores with >50% recovery contain multiple sections. This CSV includes drillhole, core, and core section identifiers, section lengths, section tops and bottoms, scaled section tops and bottoms, filenames for corresponding core images, and drilling comments. Drillhole information, such as location and total recovery, are...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Animas River,
Antelope Canyon,
Bears Ears National Monument,
Bullfrog,
Bullfrog Bay,
This is a point file that contains data for coal and other stratigraphic horizons in in the Calico and A-sequences of the Straight Cliffs Formation (Upper Cretaceous) east of 112 degrees of longitude in the Kaiparowits Plateau. The item map# is the number of the data point on the index map (Figure A, Plate 1). The map# that refers to a record in the data table (Appendix 1) in Hettinger and others, chap. T. Buffers were drawn at a three-mile distance from data points in this coverage to create the reliability coverage.
This is a shape file and coverage of the top of the Rollins Sandstone Member. It outlines the area underlain by the coal-bearing Cameo/Fairfield coal group in the southern Piceance Basin coal assessment area. Also, it delimits the area within which resources were calculated and reported in the southern Piceance Basin coal assessment area. The polygon was adjusted to match the topography of the DEM.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Book Cliffs coal field,
Carbondale coal field,
Colorado,
Colorado Plateau,
Colorado Plateau,
This is a polygon coverage that represents areas underlain by the coal-bearing Calico and A-sequences of the Straight Cliffs Formation east of 112 degrees of longitude. It differentiates between areas that contain the entire coal-bearing interval and areas where the coal-bearing strata are partially eroded. The outermost polygon defines the base of the Calico and A-sequences. The inner polygon shows where the complete coal-bearing interval is preserved. The area between the outer and inner polygon shows where the coal-bearing rocks are partially eroded. The northern boundary is delineated by the Paunsaugunt fault and volcanic rocks of Tertiary age.
|
|
