Filters: Tags: Hazards (X)
350 results (14ms)|
Filters
Date Range
Extensions
Types
Contacts
Categories Tag Types
|
The travel time map was generated using the Pedestrian Evacuation Analyst model (version 1.0.1 for ArcGIS 10.5) from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: American Samoa,
evacuation,
hazards,
modeling,
pedestrian,
The travel time map was generated using the Pedestrian Evacuation Analyst model (version 1.0.1 for ArcGIS 10.5) from the USGS (https://geography.wr.usgs.gov/science/vulnerability/tools.html). The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: American Samoa,
evacuation,
hazards,
modeling,
pedestrian,
We used the Coupled Ocean-Atmosphere-Wave-Sediment Transport (COAWST; Warner and others, 2010) model to simulate ocean circulation, waves, and sediment transport in Barnegat Bay, New Jersey, during Hurricane Sandy. The simulation period was from October 27 to November 4, 2012. Initial conditions for the salinity and temperature fields in the domain were acquired from a 7-month simulation of the same domain (Defne and Ganju, 2018). We used a 2012 digital terrain model (Andrews and others, 2015) to prescribe the prestorm bathymetry. Wetting and drying was enabled, wave-current interaction was modeled with a boundary-layer formulation accounting for the apparent roughness of waves, and the vortex force formulation...
Categories: Data;
Types: Map Service,
NetCDF OPeNDAP Service,
OGC WMS Layer;
Tags: CMG_Portal,
Earth Science > Human Dimensions > Natural Hazards > Floods,
Earth Science > Oceans > Marine Sediments > Sediment Transport,
Earth Science > Oceans > Ocean Circulation > Ocean Currents,
Earth Science > Oceans > Ocean Temperature > Potential Temperature,
Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly available data products, such as lidar, orthophotography, and geomorphic feature sets derived from those, to extract metrics of barrier island characteristics at consistent sampling distances. The metrics are then incorporated...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Raster,
Shapefile;
Tags: Atlantic Ocean,
Barrier Island,
Bayesian Network,
CMHRP,
Coastal Erosion,
Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly available data products, such as lidar, orthophotography, and geomorphic feature sets derived from those, to extract metrics of barrier island characteristics at consistent sampling distances. The metrics are then incorporated...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Atlantic Ocean,
Barrier Island,
CMHRP,
Coastal Habitat,
Coastal and Marine Hazards and Resources Program,
From June to September 2017, the United States Geological Survey (USGS) collected a total of 116 surficial sediment and bedrock samples from abandoned mine wastepiles, ephemeral channels below wastepiles, nearby outcrops, and background areas representative of the undisturbed lithology on the western slope of the northern half of the Oquirrh Mountain Range, approximately 20 miles southwest of Salt Lake City, Utah. The sample locations can be spatially clustered into four groups: the Bates Canyon group in the foothills below Bates Canyon; the Middle Canyon group in Middle Canyon; the Ridgeline group within the Bingham Mining District located at or near the Tooele-Salt Lake County border on the Oquirrh Mountain ridge;...
Categories: Data;
Tags: Bates Canyon,
Bingham Mining District,
Economic Geology,
Environmental Health,
Geochemistry,
The USGS Wyoming-Montana Water Science Center (WY–MT WSC) completed a report (Sando and McCarthy, 2018) documenting methods for peak-flow frequency analysis following implementation of the Bulletin 17C guidelines. The methods are used to provide estimates of peak-flow quantiles for 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs) for selected streamgages operated by the WY–MT WSC. This data release presents peak-flow frequency analyses for selected streamgages in and near the Milk River Basin, Montana, that were based on methods described by Sando and McCarthy (2018).
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Hydrology,
Land,
Milk River,
Milk River Basin,
Montana,
The data from the borehole strainmeter network set consists of raw data from the telemetry, state of health measurements, environmental measurement of temperature and pressure, and processed borehole strainmeter data. For each strainmeter site in this network, there will be a mix of raw data, SOH, environmental data, and processed strain. Each channel of data consists of a time of observation, usually 10-minute intervals, and a number that is either telemetry counts (which is proportional to the voltage output by the instrument), or in units of strain, which are either in part per million or parts per billion. Processed strain will be free of glitches and other artifacts and are corrected for changes in atmospheric...
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS. The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped into 1-minute increments for easier visualization. The times in...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Del Norte County,
evacuation,
hazard preparedness,
hazards,
tsunamis,
The travel time map was generated using the Pedestrian Evacuation Analyst model from the USGS. The travel time analysis uses ESRI's Path Distance tool to find the shortest distance across a cost surface from any point in the hazard zone to a safe zone. This cost analysis considers the direction of movement and assigns a higher cost to steeper slopes, based on a table contained within the model. The analysis also adds in the energy costs of crossing different types of land cover, assuming that less energy is expended walking along a road than walking across a sandy beach. To produce the time map, the evacuation surface output from the model is grouped into 1-minute increments for easier visualization. The times in...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Humboldt County,
evacuation,
hazard preparedness,
hazards,
tsunamis,
The goal of this project is to provide a preliminary overview, at a National scale, the relative susceptibility of the Nation's coast to sea- level rise through the use of a coastal vulnerability index (CVI). This initial classification is based upon the variables geomorphology, regional coastal slope, tide range, wave height, relative sea-level rise and shoreline erosion and accretion rates. The combination of these variables and the association of these variables to each other furnish a broad overview of regions where physical changes are likely to occur due to sea-level rise. Digital Data Series - 68
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired LiDAR (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. LiDAR data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
These data are a geospatial representation of potential moderate or high ground shaking intensity for seven M5 or greater aftershocks resulting from the HayWired earthquake scenario, a magnitude 7.0 earthquake occurring on the Hayward Fault on April 18, 2018, with an epicenter in the city of Oakland, CA. These data take existing ground shaking data for the HayWired mainshock and seven aftershocks (M6.21 Palo Alto, M5.69 Palo Alto, M5.22 Palo Alto, M5.26 Palo Alto, M5.98 Mountain View, M6.40 Cupertino, and M5.35 Sunnyvale) and combine them into a single ground shaking intensity surface intended for estimating possible repeat exposure to moderate or high intensity ground shaking. This vector .SHP dataset was developed...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: California,
HayWired,
San Francisco Bay area,
aftershocks,
earthquakes,
The data in this data release are comprised of one geospatial vector dataset and three tabular datasets related to the HayWired earthquake scenario, a magnitude 7.0 earthquake hypothesized to occur on April 18, 2018, with an epicenter in the city of Oakland, CA. The geospatial vector data are a representation of identified economic subareas for use in selected analyses related to selected counties in and around the San Francisco Bay region in California. Census tracts in seven economic subareas were identified, as was whether a tract potentially has a high concentration of building stock extensively or completely damaged by (1) earthquake hazards (ground shaking, landslide, liquefaction) and (2) all hazards (ground...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alameda,
California,
Census tract,
Commute flow,
Contra Costa,
This file (wymt_ffa_2021A.psf) contains specifications to run PeakFQ for peak-flow frequency analyses for selected streamgages based on data through water year 2021.
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bighorn,
Bighorn County,
Dawson County,
Land,
Little Bighorn,
The USGS Wyoming-Montana Water Science Center (WY–MT WSC) completed a report (Sando and McCarthy, 2018) documenting methods for peak-flow frequency analysis following implementation of the Bulletin 17C guidelines. The methods are used to provide estimates of peak-flow quantiles for 66.7-, 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs) for selected streamgages operated by the WY–MT WSC. This data release presents peak-flow frequency analyses for selected streamgages on the Bighorn, Tongue, and Lower Yellowstone Rivers and tributaries and Home Creek, Montana, that were based on methods described by Sando and McCarthy (2018). Citation: Sando, S.K., and McCarthy, P.M.,...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Bighorn,
Bighorn County,
Dawson County,
Hydrology,
Land,
The U.S. Geological Survey acquired high-resolution P- and S-wave seismic data across the Frijoles Fault strand of the San Gregorio Fault Zone (SGFZ) at northern Año Nuevo, California in 2012. SGFZ is a right-lateral fault system that is mainly offshore, and prior studies provide highly variable slip estimates, which indicates uncertainty about the seismic hazard it poses. Therefore, the primary goal of the seismic survey was to better understand the structure and geometry of the onshore section of the Frijoles Fault strand of the SGFZ. We deployed 118 geophones (channels) at 5-m spacing along a linear profile centered on the mapped surface trace of the Frijoles Fault and co-located active P- and S-wave sources...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Ano Nuevo,
California,
Central California Coastal,
Geophysics,
Seismology,
The USGS Wyoming-Montana Water Science Center (WY–MT WSC) completed a report (Sando and McCarthy, 2018) documenting methods for peak-flow frequency analysis following implementation of the Bulletin 17C guidelines. The methods are used to provide estimates of peak-flow quantiles for 66.7-, 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities (AEPs) for selected streamgages operated by the WY–MT WSC. This data release presents peak-flow frequency analyses for selected streamgages in and near the Milk River Basin, Montana, that were based on methods described by Sando and McCarthy (2018).
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Hydrology,
Land,
Milk River,
Milk River Headwaters,
Montana,
This Data Release provides the compilation of offset measurement datasets and associated fault data to accompany the manuscript “Climatic influence on the expression of strike-slip faulting” by Reitman et al. In addition to a ReadMe file, it includes two tabular datasets, one code, and one text file. The datasets are a compilation of offset measurement data (“data_multiple_eq_offsets.xlsx”) from 31 studies of strike-slip faults with multiple earthquakes, and the associated fault data (“fault_data" provided in csv and xlsx formats) with inputs necessary to do the analysis described in the accompanying manuscript. The code (“code_multiple_eq_offsets.ipynb”) reads the offset measurement data from each sheet of “data_multiple_eq_offsets.xlsx”...
Categories: Data;
Tags: Geomorphology,
Seismology,
Structural Geology,
USGS Science Data Catalog (SDC),
earthquake occurrences,
These datasets are raster files that represent water depths associated with each flood inundation boundary for 157 flooding scenarios in an 8-mile reach of the Papillion Creek near Offutt Air Force Base. These raster files were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Air Force, Offutt Air Force Base for use within the USGS Flood Inundation Mapping program. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages...
|
|
