Filters: Tags: High-water marks (X)
111 results (145ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
Digital flood-inundation maps for a 9.9-mile reach of Dardenne Creek, St. Charles County, Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with St. Charles County, Missouri Department of Transportation, and the cities of O'Fallon and St. Peters, Missouri. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Program at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to select water levels (stages) at the USGS streamgages 05514860 Dardenne Creek at Old Town St. Peters, Missouri, and 05587450 Mississippi River at Grafton, Illinois. Near-real-time stages at these streamgages...
This child item data set contains the field survey points used in the hydraulic model developed to create flood-inundation maps for the Schoharie Creek in North Blenheim, New York.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Flood Hazards,
Flood Inundation,
Flood Science,
Groundwater and Streamflow Information,
New York State,
This data release documents the digital data used to produce flood-inundation maps for a range of gage heights (stages) for the Sabinal River near Utopia, Tex. The simulated flood-inundation maps correspond to a range in stage from 11 to 28 feet (ft) at U.S. Geological Survey (USGS) streamgage 08197970 Sabinal River at Utopia, Tex. at intervals of 0.5-ft. The maps were created for a 10-mile reach of the Sabinal River extending from USGS streamgage 08197936 Sabinal River below Mill Creek near Vanderpool, Tex. to USGS streamgage 08197970 Sabinal River at Utopia, Tex. (hereinafter referred to as the “Utopia gage”) and 7-mile reach of the West Sabinal River were created by the USGS in cooperation with the Bandera County...
This data release documents the digital data used to produce flood-inundation maps for a range of gage heights (stages) for the Sabinal River near Utopia, Tex. The simulated flood-inundation maps correspond to a range in stage from 11 to 28 feet (ft) at U.S. Geological Survey (USGS) streamgage 08197970 Sabinal River at Utopia, Tex. at intervals of 0.5-ft. The maps were created for a 10-mile reach of the Sabinal River from USGS streamgage 08197936 Sabinal River below Mill Creek near Vanderpool, Tex., at the upstream boundary of the study reach, to USGS streamgage 08197970 Sabinal River at Utopia, Tex. (hereinafter referred to as the “Utopia gage”), at the downstream boundary of the study reach, and 7-mile reach of...
The development and the generation of the dataset that is published through this data release, is based on the results and findings of the report mentioned here: Kim, M.H., 2018, Flood-inundation maps for the Wabash River at Lafayette, Indiana: U.S. Geological Survey Scientific Investigations Report 2018–5017, 10 p., https://doi.org/10.3133/sir20185017. The geospatial dataset contains final versions of the raster and vector geospatial data and its related metadata that are discussed in the report.
Digital flood-inundation maps for a 6.6-mile reach of the St. Joseph River at Elkhart, Indiana were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather...
A two-dimensional model and digital flood-inundation maps were developed for a 30-mile reach of the Wabash River near the Interstate 64 (I-64) Bridge near Grayville, Illinois. The flood-inundation maps, which can be accessed through the U.S. Geological Survey (USGS) Flood Inundation Mapping Science web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Wabash River at Mount Carmel, Ill (USGS station number 03377500). Near-real-time stages at this streamgage may be obtained on the internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National...
Categories: Data;
Types: Citation;
Tags: Gibson County,
Grayville,
Illinois,
Indiana,
Interstate 64 (I-64),
These polygon boundaries, inundation extents, and depth rasters were created to provide an extent of flood inundation along the Neuse River within the community of Goldsboro, North Carolina. The upstream and downstream reach extent is determined by the location of high-water marks, not extending the boundary far past the outermost high-water marks. In areas of uncertainty of flood extent, the model boundary is lined up with the flood inundation polygon extent. This boundary polygon was used to extract the final flood inundation polygon and depth layer from the flood water surface raster file. The passage of Hurricane Matthew through central and eastern North Carolina during October 7-9, 2016, brought heavy rainfall...
The development and the generation of the datasets that are published through this data release, were based on the results and findings of this report: Kohn, M.S. and Patton, T.T., 2018, Flood-Inundation Maps for the South Platte River at Fort Morgan, Colorado, 2018: U.S. Geological Survey Scientific Investigations Report 2018-5114, 14 p., https://doi.org/10.3133/sir20185114. The geospatial dataset contain final versions of the raster and vector geospatial data and its related metadata. The geospatial data include inundation extents, corresponding inundation depths, and the study area boundaries. Digital flood-inundation maps for a 4.5-mile reach of the South Platte River at Fort Morgan, Colorado from Morgan County...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Colorado (CO),
Fort Morgan,
GIS,
Morgan County,
South Platte River,
Digital flood-inundation maps for a 7.6-mile reach of the Meramec River at Fenton, Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the United States Army Corps of Engineers, St. Louis Metropolitan Sewer District, Missouri Department of Transportation, Missouri American Water, Federal Emergency Management Agency Region 7, the City of Pacific, the City of Eureka, the City of Wildwood, and the City of Arnold. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage...
The dataset contains data from two GPS surveys conducted after a flow event on September 8, 2020, at the USGS streamgage 09471580 - San Pedro River at St David, AZ. The first survey, conducted on October 14, 2020, documents CSA cross section geometry, CSA pin elevations, and high-water marks at CSA cross sections from the flow event in the CSA reach downstream from the gage (09471588 - San Pedro River below Dragoon Wash at St David, AZ). The second survey, conducted on December 8, 2020, documents CSA pin elevations and additional high-water marks in the CSA reach from the flow event on September 8, 2020, and the elevation of the thalweg from the CSA reach to the streamgage (09471580) at the bridge.
The Digital Elevation Model (DEM) utilized for this Willamette FIS submittal was produced by combining multiple overlapping topographic surveys for the Middle Fork and Coast Fork of the Willamette River. The DEM was created from four sources: LIDAR of the Springfield area that was flown in 2008, LIDAR of Silk Creek that was flown in 2011, LIDAR of Fall Creek that was flown in 2012, and photogrammetry of the Middle Fork and Coast Fork of the Willamette River that was flown in 2004. In areas where no high-resolution elevation data were available, USGS National Elevation Dataset (NED) data were used to supplement the DEM. This feature represents the areas that higher quality information is presented. The horizontal...
The domain of the model is as follows: Row River from Dorena dam to the confluence with the Coast Fork; Coast Fork from Cottage Grove dam to the confluence with the Middle Fork; Silk Creek from River Mile 1.7 to the confluence with the Coast Fork. The basis for these features is the Willamette Flood Insurance Study – Phase One (2013). The hydraulics and hydrology for the FIS were reused in the production of these polygons; the reports and information associated with the FIS are applicable to this product. The Digital Elevation Model (DEM) utilized for the Willamette FIS submittal was produced by combining multiple overlapping topographic surveys for the Middle Fork and Coast Fork of the Willamette River. This DEM...
Hurricane Harvey made landfall near Rockport, Texas on August 25 as a category 4 hurricane with wind gusts exceeding 150 miles per hour. As Harvey moved inland the forward motion of the storm slowed down and produced tremendous rainfall amounts to southeastern Texas and southwestern Louisiana. Historic flooding occurred in Texas and Louisiana as a result of the widespread, heavy rainfall over an 8-day period in Louisiana in August and September 2017. Following the storm event, U.S. Geological Survey (USGS) hydrographers recovered and documented 2,123 high-water marks in Texas, noting location and height of the water above land surface. Many of these high-water marks were used to create flood-inundation maps for...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Caney,
Caney Creek,
Coldspring,
Conroe,
Cypress,
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Greenbrier River within the community of Ronceverte, West Virginia. These geospatial data include the following items: 1. greenbrier_ron_bnd; shapefile containing the polygon showing the mapped area boundary for the Greenbrier River flood maps, 2. greenbrier_ron_hwm; shapefile containing high-water mark points, 3. polygon_greenbrier_ron_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water...
Digital flood-inundation maps for a 9.1-mile reach of the Meramec River near Valley Park, Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the US Army Corps of Engineers, St. Louis Metropolitan Sewer District, Missouri Department of Transportation, Missouri American Water, Federal Emergency Management Agency Region 7, the City of Pacific, the City of Eureka, the City of Wildwood, and the City of Arnold. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage...
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the New River within the community of Hinton, West Virginia. These geospatial data include the following items: 1. newriver_bnd; shapefile containing the polygon showing the mapped area boundary for the New River flood maps, 2. newriver_hwm; shapefile containing high-water mark points, 3. polygon_newriver_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water marks, 5. polygon_newriver_dem;...
The mapped area boundary, flood inundation extents, and depth rasters were created to provide an estimated extent of flood inundation along the Howard Creek within the communities of White Sulphur Springs and Caldwell, West Virginia. These geospatial data include the following items: 1. howard_bnd; shapefile containing the polygon showing the mapped area boundary for the Howard Creek flood maps, 2. howard_hwm; shapefile containing high-water mark points, 3. polygon_howard_hwm; shapefile containing mapped extent of flood inundation, derived from the water-surface elevation surveyed at high-water marks, 4. depth_hwm; raster file for the flood depths derived from the water-surface elevation surveyed at high-water marks,...
Digital flood-inundation maps were created by the U.S. Geological Survey (USGS) in cooperation with the Bandera County River Authority and Groundwater District and with the Texas Water Development Board for a 23-mile reach of the Medina River extending from Winans Creek to English Crossing, Texas. The flood-inundation maps represent a range of selected water-surface elevations at USGS streamflow-gaging station 08178880 Medina River at Bandera, Texas (hereinafter referred to as the “Bandera station”). Near-real time hydrologic data for estimating areas of inundation near the Bandera station are available from the USGS National Water Information System (NWIS) web interface (https://waterdata.usgs.gov/tx/nwis/) and...
This feature class represents inundated area for the Coast Fork of the Willamette River, the Row River and Silk Creek (west of Cottage Grove, OR) for eight different flows at the gage Willamette River at Goshen, OR (USGS 14157500). The flows are 12,000; 15,000; 21,450; 27,900; 33,900; 39,900; 46,800 and 62,300 cubic feet per second (cfs). These flows correspond to gage heights of 11.8, 13.2, 15.1, 16.3, 17.2, 17.9, 18.6 and 19.8 feet, respectively. The domain of the model is as follows: Row River from Dorena dam to the confluence with the Coast Fork; Coast Fork from Cottage Grove dam to the confluence with the Middle Fork; Silk Creek from River Mile 1.7 to the confluence with the Coast Fork. The basis for these...
|
|
