Filters: Tags: Hydrology (X)
4,234 results (24ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
5th Code HUC reporting units for the Colorado Plateau Ecoregion Used as analytical reporting units for aquatic conservation elements.
This dataset was created as a way to have standard fish distribution datasets across the various fish species for the study area. This was needed because the original source datasets for fish distributions came from several different sources and were at various scales and also overlapped. To fix the issues in the source datasets we walked the original data over to the NHD Plus hydrography.
Difference of Potential Evapotranspiration simulated by the biogeography model MAPSS using RegCM3 climate with GFDL projections as boundary conditions. Units are millimeters of water. MAPSS (Mapped Atmosphere-Plant-Soil System) is a static biogeography model that projects potential vegetation distribution and hydrological flows on a grid (http://www.databasin.org/climate-center/features/mapss-model). MAPSS has been used widely for various climate change assessments including the 2000 National Assessment Synthesis Team's report. MAPSS uses long term, average monthly climate data (mean monthly temperature, vapor pressure, wind speed, and precipitation) as well as soils information (texture, depth). Based on a set...
The 303(d) Listed Impaired Waters program system provides impaired water data and impaired water features reflecting river segments, lakes, and estuaries designated under Section 303(d) of the Clean Water Act. Each State will establish Total Maximum Daily Loads (TMDLs) for these waters. Note the CWA Section 303(d) list of impaired waters does not represent waters that are impaired but have an EPA approved TMDL established, impaired waters for which other pollution control mechanisms are in place and expected to attain water quality standards, or waters impaired as a result of pollution and is not caused by a pollutant; therefore, the "Impaired Waters" layers do not represent all impaired waters reported in a state's...
This table contains information about the amount of each threat analysis attribute, indicator and metric quantified for the 6th level Hydrological Unit (HUC12). These attributes were calculated for the entire HUC 12, the streams within the HUC 12, or the riparian corridor within the HUC 12. The attributes were calculated using ArcMap Tools.
Difference of Runoff (2045-2060 vs 1968-1999) simulated by the biogeography model MAPSS using RegCM3 climate with ECHAM5 projections as boundary conditions. Units are millimeters of water. MAPSS (Mapped Atmosphere-Plant-Soil System) is a static biogeography model that projects potential vegetation distribution and hydrological flows on a grid (http://www.databasin.org/climate-center/features/mapss-model). MAPSS has been used widely for various climate change assessments including the 2000 National Assessment Synthesis Team's report. MAPSS uses long term, average monthly climate data (mean monthly temperature, vapor pressure, wind speed, and precipitation) as well as soils information (texture, depth). Based on a...
Downloaded from Idaho Department of Water Resources http://www.idwr.idaho.gov/GeographicInfo/GISdata/gis_data.htm. Contains information on water rights, water rights permits, minimum stream flow for Idaho.
This dataset was created as a way to have standard fish distribution datasets across the various fish species for the study area. This was needed because the original source datasets for fish distributions came from several different sources and were at various scales and also overlapped. To fix the issues in the source datasets we walked the original data over to the NHD Plus hydrography.
5th Code HUC reporting units for the Colorado Plateau Ecoregion Used as analytical reporting units for aquatic conservation elements.
The National Hydrography Dataset (NHD) and Watershed Boundary Dataset (WBD) are used to portray surface water on The National Map. The NHD represents the drainage network with features such as rivers, streams, canals, lakes, ponds, coastline, dams, and streamgages. The WBD represents drainage basins as enclosed areas in eight different size categories. Both datasets represent the real world at a nominal scale of 1:24,000-scale, which means that one inch of The National Map data equals 2,000 feet on the ground. To maintain mapping clarity not all water features are represented and those that are use a moderate level of detail. The NHD and WBD are digital vector datasets used by geographic information systems (GIS)....
Runoff simulated by the biogeography model MAPSS using RegCM3 climate with GENMOM projections as boundary conditions. Units are millimeters of water. MAPSS (Mapped Atmosphere-Plant-Soil System) is a static biogeography model that projects potential vegetation distribution and hydrological flows on a grid (http://www.databasin.org/climate-center/features/mapss-model). MAPSS has been used widely for various climate change assessments including the 2000 National Assessment Synthesis Team's report. MAPSS uses long term, average monthly climate data (mean monthly temperature, vapor pressure, wind speed, and precipitation) as well as soils information (texture, depth). Based on a set of climatic thresholds, the model...
This dataset presents the current potential distribution of lowland leopard frog in the context of current and near-term aquatic intactness, and long-term potential for climate change at the watershed (HUC5) scale. Current aquatic intactness is based on current measures of landscape development, water quality, hydrologic impacts, and road impacts. Near-term intactness includes estimates of urban growth. Long-term potential for climate change is based on absolute changes in runoff, precipitation, temperature, and vegetation change estimated using climate projections (RegCM3 regional climate model based on ECHAM5 boundary conditions) and a biogeography model (MAPSS) for the period 2045-2060. The aquatic intactness...
Potential Evapotranspiration simulated by the biogeography model MAPSS using RegCM3 climate with GFDL projections as boundary conditions. Units are millimeters of water. MAPSS (Mapped Atmosphere-Plant-Soil System) is a static biogeography model that projects potential vegetation distribution and hydrological flows on a grid (http://www.databasin.org/climate-center/features/mapss-model). MAPSS has been used widely for various climate change assessments including the 2000 National Assessment Synthesis Team's report. MAPSS uses long term, average monthly climate data (mean monthly temperature, vapor pressure, wind speed, and precipitation) as well as soils information (texture, depth). Based on a set of climatic thresholds,...
5th Code HUC reporting units for the Sonoran Desert Ecoregion Used as analytical reporting units for aquatic conservation elements.
Difference of Spring (Apr-Jun) Precipitation (2045-2060 vs 1968-1999) simulated by RegCM3 with ECHAM5 projections as boundary conditions. Units are millimeters. These data were generated by the regional climate model RegCM3 with boundary conditions from a GCM future climate projections. The data were downscaled statistically by calculating differences (anomalies) between the RegCM3 results with GCM-driven boundary conditions for 1968-99 and those for a future period, in this case 2015-2030. The anomalies were added (temperatures) or multiplied (precipitation) to a climate baseline from PRISM (Parameter-elevation Regressions on Indepenent Slopes Model - prism.oregonstate.edu) data based on historical observations....
Average Winter (Jan-Mar) Temperature (2045-2060) simulated by RegCM3 with GENMOM projections as boundary conditions. Units are degrees Celsius. These data were generated by the regional climate model RegCM3 with boundary conditions from a GCM future climate projections. The data were downscaled statistically by calculating differences (anomalies) between the RegCM3 results with GCM-driven boundary conditions for 1968-99 and those for a future period, in this case 2015-2030. The anomalies were added (temperatures) or multiplied (precipitation) to a climate baseline from PRISM (Parameter-elevation Regressions on Indepenent Slopes Model - prism.oregonstate.edu) data based on historical observations. The PRISM baseline...
Runoff simulated by the biogeography model MAPSS using RegCM3 climate with ECHAM5 projections as boundary conditions. Units are millimeters of water. MAPSS (Mapped Atmosphere-Plant-Soil System) is a static biogeography model that projects potential vegetation distribution and hydrological flows on a grid (http://www.databasin.org/climate-center/features/mapss-model). MAPSS has been used widely for various climate change assessments including the 2000 National Assessment Synthesis Team's report. MAPSS uses long term, average monthly climate data (mean monthly temperature, vapor pressure, wind speed, and precipitation) as well as soils information (texture, depth). Based on a set of climatic thresholds, the model...
Difference of Leaf Area Index (2045-2060 vs 1968-1999) simulated by the biogeography model MAPSS using RegCM3 climate with ECHAM5 projections as boundary conditions. MAPSS (Mapped Atmosphere-Plant-Soil System) is a static biogeography model that projects potential vegetation distribution and hydrological flows on a grid (http://www.databasin.org/climate-center/features/mapss-model). MAPSS has been used widely for various climate change assessments including the 2000 National Assessment Synthesis Team's report. MAPSS uses long term, average monthly climate data (mean monthly temperature, vapor pressure, wind speed, and precipitation) as well as soils information (texture, depth). Based on a set of climatic thresholds,...
5th Code HUC reporting units for the Sonoran Desert Ecoregion Used as analytical reporting units for aquatic conservation elements.
Average Summer (Jul-Sep) Precipitation (2045-2060) simulated by RegCM3 with ECHAM5 projections as boundary conditions. Units are millimeters. These data were generated by the regional climate model RegCM3 with boundary conditions from a GCM future climate projections. The data were downscaled statistically by calculating differences (anomalies) between the RegCM3 results with GCM-driven boundary conditions for 1968-99 and those for a future period, in this case 2015-2030. The anomalies were added (temperatures) or multiplied (precipitation) to a climate baseline from PRISM (Parameter-elevation Regressions on Indepenent Slopes Model - prism.oregonstate.edu) data based on historical observations. The PRISM baseline...
|
|
