Filters: Tags: Kirschbaum, M.A. (X) > partyWithName: Central Energy Resources Science Center (X)
28 results (57ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 36 = Wyoming Thrust Belt,
503601 = Mowry Composite,
50360101 = Thrust Belt Conventional,
503602 = Frontier-Adaville-Evanston Coalbed Gas,
50360281 = Frontier-Adaville-Evanston Coalbed Gas,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Uinta-Piceance Province is located in eastern Utah and western Colorado, encompassing all or parts of Delta, Garfield, Gunnison, Mesa, Moffat, Montrose, Ouray, Rio Blanco, and Routt Counties in Colorado and all or parts of Carbon, Duchesne, Emery, Grand, Sanpete, Sevier, Uintah, Utah, and Wasatch Counties in Utah. The main population...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
National Assessment of Oil and Gas Project - Wind River Basin Province (035) Total Petroleum Systems
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Southwestern Wyoming Province is located in northeastern Utah, northwestern Colorado and southwestern Wyoming, encompassing all or parts of Eagle, Garfield, Moffat, Rio Blanco, and Routt Counties in Colorado and all or parts of Carbon, Fremont, Lincoln, Sweetwater, Sublette, Teton, and Uintah Counties in Wyoming and all or parts...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells were then coded to indicate whether the wells included within the cell are predominantly oil-producing, gas-producing, are both oil- and gas-producing, or are dry or the type of production is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
50340261 = Muddy-Frontier Sandstone and Mowry Fractured Shale Continuous Gas,
National Assessment of Oil and Gas Project - Southwestern Wyoming Province (037) Maturation Contours
The maturation contours show vitrinite reflectance trends and ranges for petroleum system horizons within the Southwestern Wyoming Province. The horizons are the base of the Niobrara Formation, the top of the Frontier Formation, the base of the Mesaverde Formation, the top of the Mesaverde Formation/base of the Lewis Formation, and the top of the Lewis Formation. The ranges of vitrinite reflectance shown for the Niobrara horizons are 0.6, 0.8-1.3, and 1.3. The ranges for the top of the Frontier are less than 0.6, less than 0.8, 0.6-0.8, 0.8-1.3, and greater than 1.3. The ranges for the base of the Mesaverde are less than 0.6, 0.6-0.8, 0.8-1.1, 1.1-2.0, greater than 1.1, greater than 1.3, 2.0-2.2, greater than 2.0,...
Tar sands represent a significant source of hydrocarbons in the United States. Also known by several other names including bitumen-bearing rocks, natural asphalt, tarry oil, bituminous rock, oil sands and rock asphalt, these rocks are mostly located on the margins of sedimentary basins. Maps of tar sands and deposits were digitized to illustrate their distribution and extent within the Total Petroleum System.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
The Total Petroleum System is used in the National Assessment Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
50340261 = Muddy-Frontier Sandstone and Mowry Fractured Shale Continuous Gas,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
This dataset shows depth contours to the top of the Mesaverde Group within the Southwestern Wyoming Province, southwestern Wyoming, northeastern Utah, and northwestern Colorado
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
This dataset shows depth ranges to the top of the Dakota Sandstone within the Uinta-Piceance Province, northwestern Colorado and northeastern Utah.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
This dataset shows depth contours to the top of the Frontier Formation within the Southwestern Wyoming Province, southwestern Wyoming, northeastern Utah, and northwestern Colorado.
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 503701 = Phosphoria Total Petroleum System,
50370101 = Sub-Cretaceous Conventional Oil and Gas,
503702 = Mowry Composite Total Petroleum System,
50370201 = Mowry Conventional Oil and Gas,
50370261 = Mowry Continuous Gas,
The maturation contours show vitrinite reflectance trends and ranges for five key petroleum system horizons within the Uinta-Piceance Province. The horizons are the lower part of the Green River Formation, the base of the Mesaverde Group/top of Mancos Shale, the base of the Mancos Shale, the base of the Phosphoria Formation, and coal within the Ferron Sandstone Member of the Mancos Shale. The ranges of vitrinite reflectance shown for the horizons other than the Phosphoria Formation and the Ferron Sandstone are <0.6, 0.6 - 0.75, 0.75 - 1.1, 1.1 - 1.35, and >1.35. The ranges for the Phosphoria Formation are <1.35, 1.35 - 2.0, 2.0 - 4.0, and >4.0; the ranges for the Ferron Sandstone Member are <0.45, 0.45 - 0.5, 0.5...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 502001 = Ferron Coal/Wasatch Plateau,
50200101 = Conventional Ferron Sandstone Gas,
50200161 = Deep (6,000 feet plus) Coal and Sandstone Gas,
50200181 = Northern Coal Fairway/Drunkards Wash,
50200182 = Central Coal Fairway/Buzzards Bench,
The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Bighorn Basin Province is located in Wyoming and south central Montana. The main population centers within the study area are Cody and Thermopolis, Wyoming. The main highways, I-70 and I-90, generally traverse the area from north to south. The Bighorn River and its tributaries drain the area. The province boundary was drawn...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 34 = Bighorn Basin,
503401 = Phosphoria,
50340101 = Paleozoic-Mesozoic Conventional Oil and Gas,
503402 = Cretaceous-Tertiary Composite,
50340201 = Cretaceous-Tertiary Conventional Oil and Gas,
The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic...
Categories: Data,
pre-SM502.8;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: 50210301 = Leadville McCracken,
50210302 = Pennsylvanian Carbonate Buildups and Fractured Limestones,
50210361 = Cane Creek Shale OIl,
50210362 = Cane Creek Shale Gas,
50210363 = Gothic, Chimney Rock, Hovenweep Shale Oil,
|
|
