Skip to main content
Advanced Search

Filters: Tags: LiDAR (X) > Categories: Data Release - Revised (X)

4 results (10ms)   

View Results as: JSON ATOM CSV
thumbnail
Lidar-derived digital elevation models often contain a vertical bias due to vegetation. In areas with tidal influence the amount of bias can be ecologically significant, for example, by decreasing the expected inundation frequency. We generated a corrected digital elevation mode (DEM) for Suisun marsh using a modification of the Lidar Elevation Adjustment with NDVI (LEAN) technique (Buffington et al. 2016). GPS survey data (6912 points, collected across public and private land in 2018), Normalized Difference Vegetation Index (NDVI) derived from an airborne multispectral image (June 2018), a 1 m lidar DEM from September 2018, and a 1 m canopy surface model were used to generate models of predicted bias across the...
thumbnail
A bathymetric survey of Dierks Lake, Arkansas, was conducted in late June - early July 2018 by the Lower Mississippi-Gulf Water Science Center of the U.S. Geological Surveys using methodologies for sonar surveys similar to those described by Wilson and Richards (2006) and Richards and Huizinga (2018). Data from the bathymetric survey were combined with data from an aerial Light Detection And Ranging (LiDAR) survey conducted in 2016 by the National Resources Conservation Service (U.S. Geological Survey, 2017) to create a digital elevation model (DEM) of the extent of the flood pool of the lake and compute volume (storage capacity) of the lake at 1-foot increments in water surface elevation from 444-557 feet (ft)...
thumbnail
A bathymetric survey of Gillham Lake, Arkansas, was conducted in late June 2018 by the Lower Mississippi-Gulf Water Science Center of the U.S. Geological Survey (USGS) using methodologies for sonar surveys like those described by Wilson and Richards (2006) and Richards and Huizinga (2018). Data from the bathymetric survey were combined with data from an aerial Light Detection And Ranging (LiDAR) survey conducted in 2016 by the National Resources Conservation Service (U.S. Geological Survey, 2017) to create a digital elevation model (DEM) of the extent of the flood pool of the lake and compute volume (storage capacity) of the lake at 1-foot increments in water surface elevation from 431-559 feet (ft) above the North...
thumbnail
This imagery dataset consists of 3-meter resolution, lidar-derived imagery of the Hagerstown 30 x 60 minute quadrangle in Pennsylvania, Maryland, and part of West Virginia. The source data used to construct this imagery consists of 1-meter resolution lidar-derived digital elevation models (DEMs). The lidar source data were compiled from different acquisitions published between 2016 and 2023. The data were processed using geographic information systems (GIS) software. The data is projected in WGS 1984 Web Mercator. This representation illustrates the terrain as a hillshade with contrast adjusted to highlight local relief according to a topographic position index (TPI) calculation. First release: 2012 Revised: February...
    map background search result map search result map Bathymetry and Storage Capacity of Gillham Lake, Arkansas (ver. 1.1, April 2020) Bathymetry and Storage Capacity of Dierks Lake, Arkansas LEAN-Corrected DEM for Suisun Marsh Enhanced Terrain Imagery of the Hagerstown 30 x 60 Minute Quadrangle from Lidar-Derived Elevation Models at 3-Meter Resolution (ver. 1.1, February 2024) Bathymetry and Storage Capacity of Dierks Lake, Arkansas Bathymetry and Storage Capacity of Gillham Lake, Arkansas (ver. 1.1, April 2020) LEAN-Corrected DEM for Suisun Marsh Enhanced Terrain Imagery of the Hagerstown 30 x 60 Minute Quadrangle from Lidar-Derived Elevation Models at 3-Meter Resolution (ver. 1.1, February 2024)