Filters: Tags: Multibeam (X) > Types: OGC WFS Layer (X)

Filters Date Range Past year (8) Past month (0) Past week (0) Past day (0) Custom range... To   Search Extensions Shapefile (11) ArcGIS Service Definition (2) Types Map Service (61) OGC WMS Layer (61) OGC WMS Service (50) Citation (36) Downloadable (13) More... Contacts Bradford Butman U.S. Geological Survey William W Danforth U.S. Geological Survey - ScienceBase Richard P Signell More... Categories Data (13) Data Release - Revised (3) Tag Types Theme (60) Place (61) USGS Scientific Topic Keyword (4) Data Attribute (1) Harvest Set (9) CMS Themes (3) CMS Non-theme Topics (3) More... Tag Schemes none (37) Geographic Names Information System (GNIS) (26) None (19) ISO 19115 Topic Category (49) USGS Thesaurus (16) General (3) Coastal and Marine Ecological Classification Standard (CMECS) (2) More... View Results as: JSON ATOM CSV

GeoTIFF image of the backscatter intensity of the sea floor offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor of the Hudson Shelf Valley (12-m resolution, Mercator, WGS 84) The Hudson Shelf Valley is the submerged seaward extension of the ancestral Hudson River drainage system and is the largest physiographic feature on the Middle Atlantic continental shelf. The valley begins offshore of New York and New Jersey at about 30-meter (m) water depth, runs southerly and then southeasterly across the Continental Shelf, and terminates on the outer shelf at about 85-m water depth landward of the head of the Hudson Canyon. Portions of the 150-kilometer-long valley were surveyed in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to map the bathymetry and backscatter... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship Frederick G. Creed, Canadian Hydrographic Service (CHS), Coastal and Marine Geology Program (CMGP), GeoTIFF image, Hudson Canyon, All tags... Hudson Shelf Valley, Middle Atlantic Bight, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), USGS Open-File Report 03-372, University of New Brunswick (UNB), WHCMSC field activity 1996-043-FA, WHCMSC field activity 1998-015-FA, WHCMSC field activity 2000-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor mapping, shaded-relief bathymetry, Fewer tags GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor offshore of Moriches Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Moriches Inlet, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags Grid of the sea-floor bathymetry offshore of Shinnecock Inlet, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), Esri binary grid, All tags... Long Island, Middle Atlantic Bight, New York, New York Bight, North Atlantic Ocean, Shinnecock Inlet, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, Fewer tags Tracklines of a multibeam survey of the Hudson Shelf Valley carried out in 2000 (polyline shapefile, geographic, WGS 84) The Hudson Shelf Valley is the submerged seaward extension of the ancestral Hudson River drainage system and is the largest physiographic feature on the Middle Atlantic continental shelf. The valley begins offshore of New York and New Jersey at about 30-meter (m) water depth, runs southerly and then southeasterly across the Continental Shelf, and terminates on the outer shelf at about 85-m water depth landward of the head of the Hudson Canyon. Portions of the 150-kilometer-long valley were surveyed in 1996, 1998, and 2000 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to map the bathymetry and backscatter... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship Frederick G. Creed, Canadian Hydrographic Service (CHS), Coastal and Marine Geology Program (CMGP), Hudson Canyon, Hudson Shelf Valley, All tags... Middle Atlantic Bight, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), USGS Open-File Report 03-372, University of New Brunswick (UNB), WHCMSC field activity 2000-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, multibeam, oceans, polyline shapefile, tracklines, Fewer tags Kootenai River Supplemental Surveys near Bonners Ferry, ID, 2012-2022 In 2009, the Kootenai Tribe of Idaho released and implemented the Kootenai River Habitat Restoration Master Plan. This plan aimed to restore, enhance, and maintain the Kootenai River habitat and landscape to support and sustain habitat conditions for aquatic species and animal populations. In support of these restoration efforts, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, conducted high-resolution multibeam echosounder bathymetric surveys as a baseline bathymetric monitoring survey on the Kootenai River near Bonners Ferry, Idaho. Three channel patterns or reaches exist in the study area: braided, meander, and a transitional zone connecting the braided and meander reaches. Bathymetric... Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: ASCII, Bathymetry, Bonners Ferry, Geology, Hypack, All tags... Hysweep, ID, Idaho, Kootenai River, Multibeam, U.S. Geological Survey, USA, USGS, Water Depth, XYZ, elevation, inlandWaters, inlandWaters, swath bathymetry, topography, Fewer tags Bathymetric and supporting data for various water supply lakes in northwestern Missouri, 2019 and 2020 (ver. 1.1, September 2021) Water supply lakes are the primary source of water for many communities in northern and western Missouri. Therefore, accurate and up-to-date estimates of lake capacity are important for managing and predicting adequate water supply. Many of the water supply lakes in Missouri were previously surveyed by the U.S. Geological Survey in the early 2000s (Richards, 2013) and in 2013 (Huizinga, 2014); however, years of potential sedimentation may have resulted in reduced water storage capacity. Periodic bathymetric surveys are useful to update the area/capacity table and to determine changes in the bathymetric surface. From July 2019 to June 2020, the U.S. Geological Survey, in cooperation with the Missouri Department... Categories: Data Release - Revised; Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Bathymetry, Bathymetry and Elevation, Bethany, Caldwell County, Daviess County, All tags... DeKalb County, Gallatin, Gentry County, Hamilton, Hamilton Reservoir, Harrison County, Harrison County Lake E-1, King City, King City Reservoir, King City South Lake, Lake Viking, Maryville, Maryville Reservoir, Maysville, Maysville Reservoir, Middle Fork Grand River Reservoir, Missouri, Missouri, Mozingo Lake, Multibeam, New City Lake, Old Bethany City Lake, Stanberry, Stanberry Lake, U.S. Geological Survey, USGS, USGS Science Data Catalog (SDC), Willow Brook Lake, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, inlandWaters, location, multibeam sonar, oceans, structure, Fewer tags Tracklines of a multibeam survey of the sea floor southwest of Montauk Point, New York, in 1998 (polyline shapefile, geographic, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), EM 1000, Long Island, All tags... Middle Atlantic Bight, Montauk Point, New Jersey, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), location, mid-Atlantic Bight, multibeam, navigation, oceans, polyline shapefile, sea floor, sea floor mapping, tracklines, Fewer tags GeoTIFF image of shaded-relief bathymetry of the sea floor offshore of Fire Island Inlet, New York, in 1998 (3-m resolution, Mercator, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Fire Island, GeoTIFF image, Long Island, Middle Atlantic Bight, All tags... New York, New York Bight, North Atlantic Ocean, Simrad EM1000, WHCMSC field activity 1998-015-FA, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags Vineyard and Nantucket Sounds, Southern coast of Cape Cod including Martha's Vineyard and Nantucket: Polygon boundaries for source data of a continuous bathymetry and topography terrain model of the Massachusetts coastal zone and continental shelf: (Esri polygon shapefile, Geographic, NAD 83). Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to Hyannis; Buzzards Bay from the Cape Cod Canal southwest to the State border including the Elizabeth Islands and extending north to Fall River and Mount Hope Bay; and Nantucket and Vineyard Sounds, from Hyannis south... Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: CZM, Cape Cod, Commonwealth of Massachusetts, Cross Rip Shoal, Great Round Shoal Channel, All tags... LiDAR, Martha's Vineyard, Massachusetts Office of Coastal Zone Management, Middle Ground, Muskeget Channel, NOAA, NOS, Nantucket, Nantucket Sound, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Army Corps of Engineers, U.S. Geological Survey, USACE, USGS, United States of America, Vineyard Sound, bathymetry, boundaries, digital elevation models, echosounder, inlandwaters, multibeam, oceans, sea-floor characteristics, shapefile, swath bathymetry, Fewer tags Memphis Reservoir near Memphis, Missouri, 2021 Water supply lakes are the primary source of water for many communities in northern and western Missouri. Therefore, accurate and up-to-date estimates of lake capacity are important for managing and predicting adequate water supply. Many of the water supply lakes in Missouri were previously surveyed by the U.S. Geological Survey in the early 2000s (Richards, 2013) and in 2013 (Huizinga, 2014); however, years of potential sedimentation may have resulted in reduced water storage capacity. Periodic bathymetric surveys are useful to update the area/capacity table and to determine changes in the bathymetric surface. Memphis Reservoir is a water supply lake used by the city of Memphis in northeastern Missouri. The surface... Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Bathymetry, Bathymetry and Elevation, Memphis, Memphis Reservoir, Missouri, All tags... Missouri, Multibeam, Scotland County, U.S. Geological Survey, USGS, bathymetry, multibeam sonar, Fewer tags Buzzards Bay: Polygon boundaries for source data of a continuous bathymetry and topography terrain model of the Massachusetts coastal zone and continental shelf: (Esri polygon shapefile, Geographic, NAD 83). Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to Hyannis; Buzzards Bay from the Cape Cod Canal southwest to the State border including the Elizabeth Islands and extending north to Fall River and Mount Hope Bay; and Nantucket and Vineyard Sounds, from Hyannis south... Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Barnstable County, Bristol County, Buzzards Bay, CZM, Cape Cod Canal, All tags... Cleveland Ledge, Commonwealth of Massachusetts, Dukes County, Elizabeth Islands, FEMA, Fall River, Federal Emergency Management Agency, LiDAR, Massachusetts Office of Coastal Zone Management, Mount Hope Bay, NOAA, NOS, National Ocean Service, National Oceanic and Atmospheric Administration, New Bedford, Plymouth County, Quicks Hole, Quicksand Point, Sow and Pigs Reef, Taunton River, U.S. Army Corps of Engineers, U.S. Geological Survey, USACE, USGS, United States of America, Woods Hole, bathymetry, boundaries, digital elevation models, echosounder, inlandwaters, multibeam, oceans, sea-floor characteristics, shapefile, swath bathymetry, Fewer tags Massachusetts Bay and adjacent land: Polygon boundaries for source data of a continuous bathymetry and topography terrain model of the Massachusetts coastal zone and continental shelf: (Esri polygon shapefile, Geographic, NAD 83) Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to Hyannis; Buzzards Bay from the Cape Cod Canal southwest to the State border including the Elizabeth Islands and extending north to Fall River and Mount Hope Bay; and Nantucket and Vineyard Sounds, from Hyannis south... Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Boston Harbor, CZM, Cape Ann, Commonwealth of Massachusetts, Essex County, All tags... Gulf of Maine, Ipswich Bay, LiDAR, Massachusetts Bay, Massachusetts Office of Coastal Zone Management, NOAA, NOS, National Ocean Service, National Oceanic and Atmospheric Administration, Norfolk County, Plymouth Bay, Plymouth County, Salem Harbor, Stellwagen Bank, Stellwagen Bank National Marine Sanctuary, Suffolk County, U.S. Army Corps of Engineers, U.S. Geological Survey, USACE, USGS, United States of America, bathymetry, boundaries, digital elevation models, inlandWaters, multibeam, oceans, sea-floor characteristics, shapefile, swath bathymetry, Fewer tags Grid of the sea-floor bathymetry offshore of Fire Island Inlet, New York, in 1998 (3-m resolution Esri binary grid, Mercator, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m grid, Esri binary grid, Fire Island, Long Island, Middle Atlantic Bight, All tags... New York, New York Bight, North Atlantic Ocean, Simrad EM1000, WHCMSC field activity 1998-015-FA, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor mapping, Fewer tags Elevation contours, Morris Lake (Newton Reservoir), New Jersey, 2018 This dataset contains a map of the bathymetric contours of Morris Lake (Newton Reservoir) at 2-foot intervals of elevation. Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Geospatial Applications, Hydrogeologic Characterization, Morris Lake, New Jersey, Newton, All tags... Newton Reservoir, Township of Sparta, Water Budget, Water Use and Availability Science, bathymetry, bathymetry measurement, elevation, geoscientificInformation, imageryBaseMapsEarthCover, inlandWaters, location, multibeam, single beam sonar, structure, water depth, Fewer tags Bathymetry and Velocity Data from Surveys at Highway Bridges crossing the Missouri River in Kansas City, Missouri, in August 2019, August 2020, and October 2020 These data are high-resolution bathymetry (riverbed elevation) and depth-averaged velocities in ASCII format, generated from hydrographic and velocimetric surveys near highway bridge structures over the Missouri River in Kansas City, Missouri, in August 2019, as well as special surveys at two of the sites in August and October 2020 before and after installation of scour countermeasures. Hydrographic data were collected using a high-resolution multibeam echosounder mapping system (MBMS), which consists of a multibeam echosounder (MBES) and an inertial navigation system (INS) mounted on a marine survey vessel. Data were collected as the vessel traversed the river along planned survey lines distributed throughout... Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: ADCP, ASCII, Acoustic, Bathymetry, Doppler, All tags... Geology, Geomorphology, Hydrology, KS, Kansas, Kansas City, MO, Missouri, Missouri River, Multibeam, Planetary Sciences, Remote Sensing, Sedimentology, U.S. Geological Survey, USA, USGS, USGS Science Data Catalog (SDC), Water Depth, Water Resources, XYZ, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, inland waters, inlandWaters, inlandWaters, location, oceans, structure, Fewer tags Cape Cod Bay: Polygon boundaries for source data of a continuous bathymetry and topography terrain model of the Massachusetts coastal zone and continental shelf: (Esri polygon shapefile, Geographic, NAD 83). Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to Hyannis; Buzzards Bay from the Cape Cod Canal southwest to the State border including the Elizabeth Islands and extending north to Fall River and Mount Hope Bay; and Nantucket and Vineyard Sounds, from Hyannis south... Types: Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Barnstable County, Barnstable Harbor, Billingsgate Shoal, CZM, Cape Cod, All tags... Cape Cod Bay, Cape Cod Canal, Chatham Harbor, Commonwealth of Massachusetts, Green Harbor, Gurnet Point, LiDAR, Manomet Point, Massachusetts Office of Coastal Zone Management, NOAA, NOS, National Ocean Service, National Oceanic and Atmospheric Administration, Plymouth Bay, Plymouth County, Provincetown, Race Point, Sandy Neck, U.S. Army Corps of Engineers, U.S. Geological Survey, USACE, USGS, United States of America, bathymetry, boundaries, digital elevation models, fathometer, inlandwaters, lead line, multibeam, oceans, sea-floor characteristics, shapefile, swath bathymetry, Fewer tags GeoTIFF image of shaded-relief bathymetry, colored by backscatter intensity, of the sea floor southwest of Montauk Point, New York, in 1998 (3-m resolution, Mercator, WGS 84) Surveys of the bathymetry and backscatter intensity of the sea floor south of Long Island, New York, were carried out in November 1998 using a Simrad EM1000 multibeam echosounder mounted on the Canadian Coast Guard ship Frederick G. Creed. The purpose of the multibeam echosounder surveys was to explore the bathymetry and backscatter intensity of the sea floor in several areas off the southern coast of Long Island along the 20-meter isobath. Survey areas offshore of Fire Island Inlet, Moriches Inlet, Shinnecock Inlet, and southwest of Montauk Point were about 1 kilometer (km) wide and 10 km long. The area was mapped by the U.S. Geological Survey with support from the Canadian Hydrographic Service and the University... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: 3-m resolution image, Canadian Coast Guard ship (CCGS) Frederick G. Creed, Canadian Hydrographic Service, Coastal and Marine Geology Program (CMGP), GeoTIFF image, All tags... Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, North Atlantic Ocean, Simrad EM1000, U.S. Geological Survey (USGS), University of New Brunswick, WHCMSC field activity 1998-015-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), backscatter intensity, geoscientificInformation, image, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, Fewer tags Geomorphic provinces in the Hudson Canyon region (polyline shapefile, geographic, WGS 84) The Hudson Canyon begins on the outer continental shelf off the east coast of the United States at about 100-meters (m) water depth and extends offshore southeastward across the continental slope and rise. A multibeam survey was carried out in 2002 to map the bathymetry and backscatter intensity of the sea floor of the Hudson Canyon and adjacent slope and rise. The survey covered an area approximately 205 kilometers (km) in the offshore direction, extending from about 500 m to about 4,000 m water depth, and about 110 km in the alongshore direction, centered on the Hudson Canyon. The sea floor was mapped using a SeaBeam Instruments 2112 multibeam echosounder aboard the National Oceanic and Atmospheric Administration... Categories: Data; Types: Citation, Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, Shapefile; Tags: Coastal and Marine Geology Program (CMGP), Hudson Canyon, Middle Atlantic Bight, NOAA ship Ronald H. Brown, National Oceanic and Atmospheric Administration (NOAA), All tags... New York Bight, North Atlantic Ocean, Rutgers Institute of Coastal and Marine Sciences, SeaBeam Instruments 2112 multibeam, U.S. Geological Survey (USGS), USGS Open-File Report 2004-1441, WHCMSC field activity 2002-050-FA, Woods Hole Coastal and Marine Science Center (WHCMSC), base of slope, canyon floor, canyon floor - filled, canyon wall, geoscientificInformation, imageryBaseMapsEarthCover, interpretation, lower rise, marine geology, morphology, multibeam, ocean sciences, oceans, polyline shapefile, rise valley, sea floor, sea floor mapping, sea-floor characteristics, upper rise, Fewer tags Offshore of Moriches Inlet, New York These data are from a 1998 multibeam survey of the sea floor offshore of Moriches Inlet, New York. There are five datasets: bathymetry grid, shaded-relief image, backscatter intensity image, shaded-relief colored by backscatter intensity image, and trackline navigation. The bathymetry shows the shape of the sea floor. Of particular interest are the size, shape, and orientation of bed forms that may indicate sediment movement. The shaded-relief image provides a visualization of the bathymetry that accentuates small features that cannot be effectively shown as contours alone. The image of backscatter intensity provides qualitative information on the sediment texture and roughness of the sea floor. The image of shaded-relief... Types: Citation, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service; Tags: Long Island, Middle Atlantic Bight, Montauk Point, New York, New York Bight, All tags... North Atlantic Ocean, backscatter, backscatter intensity, bathymetry, elevation, geoscientificInformation, imageryBaseMapsEarthCover, mid-Atlantic Bight, multibeam, oceans, sea floor, sea floor mapping, shaded-relief bathymetry, tracklines, Fewer tags 1 2 3 4 »