Filters: Tags: New Zealand (X) > partyWithName: U.S. Geological Survey - ScienceBase (X)
14 results (67ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types Tag Schemes |
New Zealand’s Alpine Fault (AF) ruptures quasi-periodically in large-magnitude earthquakes. Paleoseismological evidence suggests that about half of all recognized AF earthquakes terminated at the boundary between the Central and South Westland sections of the fault. There, fault geometry and the polarity of uplift change. The South Westland AF exhibits oblique-normal fault motion on a structure oriented 055/82SE that, for at least 35 km along strike, contains saponite-rich principal slip zone gouges. New hydrothermal friction experiments reveal that the saponite fault gouge is frictionally weak, exhibiting friction coefficients between =0.12 and =0.16 for a range of temperatures (T=25–210 C) and effective normal...
This data release contains relevant datasets used in the analysis for the Chesapeake Bay stressor identification project, for which results are described in Fanelli and others (2022). For this project, two existing information sources were compiled and summarized to identify key in-stream stressors reported by the scientific literature or through regulatory assessments to be likely affecting benthic macroinvertebrate community metrics in the Chesapeake Bay region: 1) the peer reviewed multi-stressor literature, in which the effects multiple in-stream stressors on benthic macroinvertebrate community metrics are simultaneously assessed; and 2) reported causes of biological impairment as listed by state or district...
The Taupo Volcanic Zone (TVZ), New Zealand, is the most productive area of explosive silicic volcanism in the world. Faulted early and middle Pleistocene volcanic products are generally concealed beneath voluminous, generally unfaulted, younger volcanic products. An exception is the southeast margin of the TVZ where the two parallel, northeast-trending Paeroa and Te Weta Fault blocks expose Quaternary volcanic products consisting predominantly of caldera-related, rhyolitic ignimbrites and lacustrine sediments. The Taupo-Reporoa Basin is situated along the eastern part of the map area, and its northernmost part underwent collapse to form Reporoa Caldera. The Paeroa Fault block is the largest exposed fault block within...
The U.S. Geological Survey (USGS) has compiled a geodatabase containing mineral-related geospatial data for 19 countries of interest in the Indo-Pacific region (area of study): Bangladesh, Bhutan, Brunei, Burma, Fiji, Malaysia, Mongolia, Nauru, New Caledonia, New Zealand, Papua New Guinea, Philippines, Singapore, Solomon Islands, South Korea (Republic of Korea), Sri Lanka, Taiwan, Timor-Leste, and Vietnam. The data can be used in analyses of the extractive fuel and nonfuel mineral industries integral for the successful operation of the mineral industries within the area of study. This geodatabase reflects the USGS ongoing commitment to its mission of understanding the nature and distribution of global mineral commodity...
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Asia,
Bangladesh,
Bhutan,
Brunei,
Burma,
This dataset consists of 16 repeated magnetotelluric (MT) stations collected on Mount Tongariro, New Zealand, before (2009) and after (2013) the 2012 eruption. The data were collected in same locations with similiar instruments. Preeruption and posteruption electromagnetic magnetotelluric measurements determine variation in subsurface electrical properties resulting from changes in magmatic system associated with the 2012 eruptive cycle.
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Apparent Resistivity,
Earth Magnetic Field,
GMEGSC,
Geology, Minerals, Energy, and Geophysics Science Center,
Geophysics,
This dataset includes information compiled for the literature review meta-analysis portion for the Chesapeake Bay Stressor Identification Project. The dataset includes basic identifying information regarding the publication (last name of the first author, year published, study type, and number of observational units included in the study), the response metric for which results were reported, and the major source or driver that was the focus of the study. The dataset denotes for each stressor category whether a stressor was measured and whether the study’s analysis found it to be an important factor influencing the response metric. The results are reported for both coarse and fine stressor levels, since two stressor...
This dataset contains major and trace element compositions for a sample of basalt recovered from Rangitoto Island, New Zealand. Both bulk rock and microanalytical observations are made and presented. Electron probe microanalysis (EPMA) results detail the compositions of individual phases within the basalt including olivine, clinopyroxene, plagioclase feldspar, glass, and polyphase microcrystalline groundmass. Laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) results detail trace element compositions for the glass as well as on select olivine grains. X-Ray fluorescence (XRF) data detailing major and minor element oxide concentrations were gathered using bulk rock powders. Additional tables detail...
Categories: Data;
Tags: Geochemistry,
New Zealand,
Rangitoto Island,
USGS Science Data Catalog (SDC),
basalt,
Bottom simulating reflections (BSRs) are seismic features that are imaged in marine sediments using high-energy, impulsive seismic sources such as air guns or generator-injector guns. BSRs often cut across sediment stratigraphy and are interpreted as marking the deepest depth at which gas hydrate can exist. Gas hydrate is a naturally occurring and widely distributed frozen form of water and gas (usually methane) stable at low temperatures (up to about 25 degrees Celsius [°C]) and intermediate pressures (those that usually correspond to greater than 500 meters water depth). BSRs have been mapped in all the world’s oceans, in inland seas (such as the Black Sea), and in Lake Baikal in Russia. This data release consists...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Alaska,
Amazonia,
Antarctica,
Arctic,
Argentina,
This dataset includes summary information on the reports/studies compiled for the literature review portion of the Chesapeake Bay stressor identification project. This dataset includes basic identifying information regarding the report (name of the report, last name of the first author, year published, persistent link to the report, etc.). It also lists the geographic location of the study (U.S. states or countries for those outside the U.S.), the type of field study, the major source or driver that was the focus of the study, and which in-stream stressors were measured. Finally, the dataset includes a decision code to denote whether the study/report results were included in this project’s analysis or not. If not,...
This data release contains the boundaries of conventional assessment units for the assessment of undiscovered oil and gas resources in the Greater Taranaki and East Coast Basins, New Zealand. The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Assessment Unit,
Challenger Plateau,
Conventional Assessment Unit,
East Coast Basin Mesozoic-Cenozoic Reservoirs,
Energy Resources,
These worksheets contain data from geochemical analyses of solid mill tailings and other ore processing materials from worldwide localities, and leachates from those samples.
Acoustic Doppler current profiler (ADCP) discharge measurement data were collected and analyzed for use in developing an operational uncertainty analysis tool known as QUant (Moore and others, 2016). These ADCP measurements were originally collected in the United States, Canada, and New Zealand as a part of research conducted to validate ADCP discharge measurements made with Teledyne RD Instruments RiverRay and SonTek M9 ADCPs (Boldt and Oberg, 2015). The data were chosen in order to represent a variety of geographic and streamflow conditions, such as mean depth and mean velocity. Due to current limitations in the QUant software, only measurements collected using Teledyne RD Instruments Rio Grande and StreamPro...
This worksheet displays the results of mineral abundance estimates based on Rietveld refinement of X-ray diffraction (XRD) analyses of mill tailings and other ore processing materials from worldwide localities. Data are also provided to show variation in mineral abundance estimates for subsplits in individual samples. Samples were analyzed using a PANalytical X'Pert Pro diffractometer using Cu radiation and the results interpreted using Highscore Plus v.4.7.
This data release presents the Yale stocks and flows database (YSTAFDB). Its data describe the use of 102 materials from the early 1800s to circa 2013 through anthropogenic cycles, their recycling and criticality properties, and on spatial scales ranging from suburbs to global. This data collection was previously scattered across multiple non-uniformly formatted files such as journal papers, reports, and unpublished spreadsheets. These data have been synthesized into YSTAFDB, which is presented as individual comma-separated text files and also in MySQL and PostgreSQL database formats. Consolidation of these data into a single database can increase their accessibility and reusability, which is relevant to diverse...
|
|
